Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.28 - 1.32 g/cc | 0.0462 - 0.0477 lb/in³ | Fusor 2002 |
Lord Adhesives Fusor® 2001 / 2002 Urethane Adhesive Fusor® 2001/2002 is a two-part urethane adhesive system used to bond fiberglass reinforced plastics, sheet molded compound, and bulk molded compound to themselves as well as to primed metals.All .. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ISO 1183 |
Lanxess Durethan® DP 2131/20 H2.0 900051 Nylon 6, 20% Glass Fiber PA 6, injection molding grade, 20% glass fibers, better surface resistance to alcoholic calcium chloride-solution than BKV 20 H2.0, good heat-ageing resistance and weather resistance |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP LUBRICOMP DL003P PC (Asia Pacific) LNP LUBRICOMP* DL003P is a compound based on Polycarbonate resin containing PTFE. Added features of this material include: Exceptional Processing. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP LUBRICOMP YL003 Polyester Elastomer (Europe-Africa-Middle East) LNP* LUBRICOMP* YL003 is a compound based on Polyester Elastomer containing PTFE. Added features include; Internally Lubricated. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ISO 1183 |
SABIC Innovative Plastics ULTEM CRS5011R PEI Enhanced flow Polyetherimide copolymer (Tg 225C) with internal mold release and enhanced chemical resistance to strong acids, bases, aromatics and ketones. ECO Conforming. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ISO 1183 |
SABIC Innovative Plastics ULTEM CRS5011R PEI (Asia Pacific) Enhanced flow Polyetherimide copolymer (Tg 225C) with internal mold release and enhanced chemical resistance to strong acids, bases, aromatics and ketones. ECO Conforming. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ASTM D792 |
Techmer ES HiFill® ABS E GM30 LE 30% Glass Filled Availability: North AmericaFeatures: Low ExtractablesForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 30% Filler by WeightInformation provided by TP Composites, Inc. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ASTM D792 |
Techmer ES HiFill® HDPE TM40 40% Talc Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Talc Filler, 40% Filler by WeightInformation provided by TP Composites, Inc. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP THERMOCOMP Lexan_BFL2200 PC (Asia Pacific) design for black light frame application as high flow PC, V-2, high reflection grade. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP THERMOCOMP QC008 PA6.10 LNP* THERMOCOMP* QC008 is a compound based on Nylon 6/10 containing 40% Carbon Fiber. Added feature of this grade is: Electrically Conductive. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP THERMOCOMP RB004 PA 66 LNP* THERMOCOMP* RB004 is a compound based on Nylon 66 containing Glass Beads. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ASTM D792 |
Westlake Plastics Radel® R 4400 Polyphenylsulfone For Medical Applications Medical grade Radel R4400 resin offers exceptional hydrolytic stability, toughness, heat deflection temperature and resistance to stress cracking. This polymer also has excellent thermal stability,.. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | GB/1033 |
Zhejiang Juner JEPPB005 High Glossy PP Applications: Shell of Air ConditionerInformation provided by Zhejiang Juner New Materials Co, Ltd. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | Resin |
Hexcel® HexPly® M48 180°C/356°F Curing Epoxy Matrix, M48/35%/150/AS7 GS Fiber: AS7 GS, UD, 150 g/m2Information provided by HexCel |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ASTM D1505 |
Eastman Cadence™ GS1 Copolyester for film calendering Eastman Cadence™ copolyester, for calendered films, is a specialty plastic developed to meet the demand for an environmentally responsible material for the calendering industry. Available in diffe.. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ASTM D1505 |
Eastman Cadence™ GS2 Copolyester for film calendering Eastman Cadence™ copolyester, for calendered films, is a specialty plastic developed to meet the demand for an environmentally responsible material for the calendering industry. Available in diffe.. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ASTM D 792 |
Cossa Polimeri ESTACARB 0820 GF V0 HF Flame Retardant Polycarbonate Polycarbonate with 10% glass fiber reinforcementFlame retardant class V0, antimony, chlorine and bromine free, high stiffness, high dimensional stability, good processability, good light resistanceI.. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ASTM D792 |
Aclo Accuguard Polycarbonate POL050G10HIV0L Glass Reinforced High Impact Flame Retardant |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | Silicone Property; Arlon SQA-TMS-024 |
Arlon 26122P020 0.020" Cured Silicone Rubber/Laminated PTFE Film Design/Construction:Interleave: 0.002" ETFESide 1: Cured Silicone RubberLaminated Substrate: Cast PTFE FilmThis data represents typical values for the production material and should not be used a.. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ISO 1183-1-A |
BASF Elastollan 564 D TPUR Description: Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties and a high abrasion resistance.Typical Applications: Heel top-pieces, castor tyres and parts requiri.. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | Foam |
Aptek DI-STRATE 95197 Microwave/RF Foam Substrate DI-STRATE™ Tiles are fully-crosslinked, low density, composite foam substrates which exhibit a low characteristics in the microwave frequency range.Uses: Auto RadarInformation provided by Aptek Lab.. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ASTM D792 |
Multibase Multi-Flex® TPE A 6421 BLK The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | Liquid |
3M Novec™ 72DE Engineered Fluid 3M™ Novec™ 72DE is intended for heavy duty cleaning and degreasing applications. The high solvency and low toxicity make it an ideal replacement for ozone-depleting compounds, chlorinated solvents.. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | dry; ISO 1183 |
DSM Novamid® 1013PL1 NAT PA6-MX Injection Molding |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | (Dry) |
BASF Capron® GR20 HS 20% Glass-Filled Nylon 6 (Conditioned)
(discontinued **) Capron GR20 HS is a heat stabilized 20% glass reinforced polyamide 6 injection molding compound possessing a balance of engineering properties combined with excellent processability and surface aest.. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ASTM D792 |
PolyOne Edgetek® MP-30GF/000 Modified PPO - 30% Glass Fiber Reinforced
(discontinued **) Data provided by PolyOne. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | |
Momentive Performance Materials RTV630 Blue General Purpose Potting/Encapsulating Compound Two-part addition cure. Two-part addition cure RTV silicones can be cured very quickly with the use of high heat. Addition cure products have no cure by-products and can be used to unlimited depth.. |
|||
Density | 1.28 g/cc | 0.0462 lb/in³ | ASTM D792 |
Buckeye Polymers BP RPP 4012 C Polypropylene, 40% Mineral Filled Calcium carbonate-filled PP grades have a high impact toughness, moderate increased stiffness, and excel in high gloss applications. This material can be customized through the addition of UV packag.. |