POLYMER SEARCH

SABIC Innovative Plastics NORYL NH7010HF PPE+PS

Category	Polymer , Thermoplastic , Polyphenylene Ether/PPO , Polystyrene (PS)
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	Noryl
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics NORYL NH7010HF PPE+PS.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Noryl* NH7010HF resin is a modified PPE-PS blend that exhibits an excellent balance of non-halogenated flame retardance, high heat resistance, good flow, and low specifc gravity for light weight parts. The resin will be available in custom colors and is suitable for injection molding.

Physical Properties	Metric	English	Comments
Specific Gravity	1.09 g/cc	1.09 g/cc	ASTM D792
Density	1.09 g/cc	0.0394 lb/inÂ³	ISO 1183
Moisture Absorption	0.0500 %	0.0500 %	23Â°C / 50% RH; ISO 62
Water Absorption at Saturation	0.25 %	0.25 %	ISO 62
Linear Mold Shrinkage, Flow	0.0050 - 0.0080 cm/cm @Thickness 3.20 mm	0.0050 - 0.0080 in/in @Thickness 0.126 in	SABIC Method
Melt Flow	20.1 g/10 min @Load 5.00 kg, Temperature 300 Â°C	20.1 g/10 min @Load 11.0 lb, Temperature 572 Â°F	ASTM D1238
Melt Index of Compound	20 g/10 min @Load 5.00 kg, Temperature 300 Â°C	20 g/10 min @Load 11.0 lb, Temperature 572 Â°F	MVR [cm^3/10 min]; ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	59.0 MPa	8560 psi	Type I, 50 mm/min; ASTM D638
Elongation at Break	12 %	12 %	Type I, 50 mm/min; ASTM D638
Elongation at Yield	5.0 %	5.0 %	Type I, 50 mm/min; ASTM D638
Tensile Modulus	2.18 GPa	316 ksi	5 mm/min; ASTM D638
Flexural Yield Strength	100 MPa	14500 psi	1.3 mm/min, 50 mm span; ASTM D790
Flexural Modulus	2.46 GPa	357 ksi	1.3 mm/min, 50 mm span; ASTM D790
Izod Impact, Notched	2.27 J/cm	4.25 ft-lb/in	ASTM D256
	0.690 J/cm @Temperature -30.0 Â°C	1.29 ft-lb/in @Temperature -22.0 Â°F	ASTM D256
Dart Drop, Total Energy	53.0 J @Temperature 23.0 Â°C	39.1 ft-lb @Temperature 73.4 Â°F	ASTM D3763

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	80.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	44.4 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	80.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	44.4 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
CTE, linear, Transverse to Flow	80.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	44.4 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	80.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	44.4 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
Deflection Temperature at 1.8 MPa (264 psi)	139 Â°C	282 Â°F	Flatw 80104 sp=64mm; ISO 75/Af
	138 Â°C @Thickness 3.20 mm	280 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Vicat Softening Point	159 Â°C	318 Â°F	Rate B/50; ASTM D1525
	162 Â°C	324 Â°F	Rate B/120; ISO 306
UL RTI, Electrical	105 Â°C	221 Â°F	UL 746B
UL RTI, Mechanical with Impact	105 Â°C	221 Â°F	UL 746B
UL RTI, Mechanical without Impact	105 Â°C	221 Â°F	UL 746B
Flammability, UL94	V-0 @Thickness 1.50 mm	V-0 @Thickness 0.0591 in	UL 94 by SABIC-IP
	5VA @Thickness 2.00 mm	5VA @Thickness 0.0787 in	UL 94 by SABIC-IP

Electrical Properties	Metric	English	Comments
Arc Resistance	60 - 120 sec	60 - 120 sec	Tungsten; ASTM D495
Comparative Tracking Index	175 - 250 V	175 - 250 V	UL 746A
Hot Wire Ignition, HWI	>= 120 sec	>= 120 sec	UL 746A
High Voltage Arc-Tracking Rate, HVTR	>= 150 mm/min	>= 5.91 in/min	UL 746A

Users viewing this material also viewed the following: