Electrical Properties | Metric | English | Comments |
---|---|---|---|
Surface Resistance | 1.00e+11 - 1.00e+12 ohm | 1.00e+11 - 1.00e+12 ohm | IEC 60093 |
Raschig Group RALUPOL® 2100 UP Polyester Organically and inorganically filled polyester molding compound. Low post-shrinkage, very good electrical values, good mechanical strength. This product meets the allowed upper limits for heavy meta.. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
Hexion Bakelite™ PF 31.9 Phenolic Formaldehyde Resin, Ammonia Free
(discontinued **) Phenolic molding compound, mainly organically filled, ammonia free, standardized molding compound.Application areas: Parts for electrical and telecommunications technology, motor vehicle ignition sy.. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
Hexion Bakelite™ PF 85 Phenolic Formaldehyde Resin, UL Listed
(discontinued **) Phenolic molding compound, organically filled, reinforced with cotton fibers, average notched impact strength, UL listed molding compound 1.5 mm/HB (BK, BN).Application areas: Switch covers, rolls, .. |
|||
Surface Resistance | 1.00e+11 - 1.00e+15 ohm | 1.00e+11 - 1.00e+15 ohm | Average value: 3.55e+14 ohm Grade Count:20 |
Overview of materials for Nylon 12, Extrusion/Tubing Grade This property data is a summary of similar materials in the MatWeb database for the category "Nylon 12, Extrusion/Tubing Grade". Each property range of values reported is minimum and maximum values .. |
|||
Surface Resistance | >= 1.00e+11 ohm | >= 1.00e+11 ohm | |
Lehmann & Voss LUVOCOM® 3-8437 Polyamide 6, with glass fiber Applications: Automotive industry, textile machinery, apparatus- and precision engineering.High-strength and stiff parts with low creep.Emergency running property.Suitable for metall inserts.Control.. |
|||
Surface Resistance | >= 1.00e+11 ohm | >= 1.00e+11 ohm | |
Lehmann & Voss LUVOCOM® 6-8512 Polyamide 12, with carbon fiber, lubricant modified Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Especially suitable at dynamic.. |
|||
Surface Resistance | >= 1.00e+11 ohm | >= 1.00e+11 ohm | |
Lehmann & Voss LUVOCOM® 80-8470 Polyacetal-copolymer, unreinforced Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Isotropic shrinkage characteristics.Strong, stiff parts.Impact resistance.Control disks, cams, .. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
Lanxess Durethan® C 38 FA 000000 Copolyamide Copolyamide, film quality, high transparency, with slip agent, not nucleatedApplication Examples: blown film coextrusion (central layer) |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | cond.; IEC 60093 |
Lanxess Durethan® C 38 FAM 000000 Copolyamide PA 6-Copolymer, non-reinforced, extrusionInformation provided by LANXESS. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
Solvay TECHNYL® A 218 V20 Black 21N PA66, 20% glass fiber, Conditioned Description: Polyamide PA66, reinforced with 20% of glass fiber, heat stabilized, for injection molding.Available in: EuropeProduct Applications: TECHNYL A 218 V20 is used in all sectors of industry.. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
Solvay TECHNYL® A 218G1 V25 Black 34N PA66, 25% glass fiber, Conditioned Description: Polyamide 66, reinforced with 25% of glass fiber, for injection molding. This grade shows an improved retention of properties after long term ageing in automotive cooling liquids. Avail.. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
Solvay TECHNYL® A 218G1 V30 Black 34N PA66, 30% glass fiber, Conditioned Description: Polyamide 66, reinforced with 30% of glass fiber, for injection molding. This grade shows an improved retention of properties after long term ageing in automotive cooling liquids. For 7.. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
Solvay TECHNYL® A 230 V13 PA66, 13% glass fiber, Conditioned Description: Modified polyamide 66, reinforced with 13% of glass fiber, with improved impact resistance, for injection molding.Available in: Europe and North AmericaProduct Applications: In addition.. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
Solvay TECHNYL® A 218W V30 Black FA PA66, 30% glass fiber, Conditioned Description: Polyamide 66, reinforced with 30% of glass fiber, for injection molding, heat stabilized, with improved hydrolysis resistance.Available in: EuropeProduct Applications: TECHNYL A 218W V3.. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
Solvay TECHNYL® 2412GHF6 PA66, 33% glass fiber, Conditioned Description: Polyamid 66, reinforced with 33% of glass fiber, heat stabilized for injection moldingAvailable in: Asia PacificProduct Applications: TECHNYL® 2412GHF6 is used in all sectors of indu.. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 93 |
Vyncolit X613 Novolac Phenolic Glass fiber filled phenolic molding compound with excellent mechanical and thermal properties. UL listed.USES: Solenoid covers or automotive under-bonnet applications such as: water pumps, impeller.. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
EMS-Grivory Grivory® TSG-30 PA666-GF30 Product description: Grilon TSG-30 is a heat stabilized, normal viscosity PA66 + PA6 injection molding grade with 30% glass fibers. Grilon TSG-30 has the following important properties: Excellent fl.. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
EMS-Grivory Grivory® TSGK-30 X PA666-(GF+GB)30 Product description: Grilon TSGK-30 X is a heat stabilized PA66 + PA6 injection molding grade with a 30% reinforcement combination (glass fibers and glass beads). Grilon TSGK-30 X has the following .. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
EMS-Grivory Grivory® TSM-30/2 PA666-MD30 Product description: Grilon TSM-30/2 is a heat stabilized, normal viscosity PA66 + PA6 injection molding grade with 30% mineral filler. Grilon TSM-30/2 has the following important properties: Excell.. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | CEI 60093 |
Addiplast Addilene H 532 N30 Polypropylene Homopolymer Good surface appearanceInformation provided by Addiplast. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | Conditioned; CEI 60093 |
Addiplast Addinyl B2 R Nylon 6 High impact resistanceInformation provided by Addiplast. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
Bulk Molding Compounds tetra-DUR F 4001 Bulk Molding Compound UL-Licensed, Abrasion resistance, free of fiber glass.Typical Applications - Requiring mechanical strength, abrasion resistance, dimensional stability, electrical insulation, electrostatic dissipati.. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | ASTM D257 |
Adamas Adalon® 453 PTFE, Mica filler Information provided by Adamas, HPM |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | CEI 60093 |
Addiplast Addilene J 430 N30 Polypropylene Copolymer Good surface appearanceInformation provided by Addiplast. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | ASTM D257 |
Techmer ES Statiblend® PP FR BK Availability: North AmericaForms: PelletsFeature: Flame Retardant, Homopolymer and Semi ConductiveUL File Number: E157318Information provided by TP Composites, Inc. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
Hexion Bakelite™ PF 2874 Phenolic Formaldehyde Resin, Low Shrinkage, Improved Electrical Properties, UL Listed, High Mechanical Strength Phenolic molding compound, inorganically filled, glass fiber reinforced, increased mechanical strength, increased temperature stability, low water absorption, good dimensional stability, UL listed m.. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | CEI 60093 |
Addiplast Addilene H 552 Y7 Polypropylene Homopolymer Good surface appearance, high temperature resistanceInformation provided by Addiplast. |
|||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
EMS-Grivory Grivory® LBV-50H FWA nat PA12-GF50 Product Description: Grilamid LBV-50H FWA natural is a 50% glass fiber reinforced, heat stabilized polyamide 12 injection molding grade with the following special features: High stiffness combined w.. |