Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melting Point = 432 °F Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Melting Point 222 °C
432 °F
Plastcom SLOVAMID 6 BT HV TLS PA6, light and thermal stability
FeaturesPA 6 for injection moulding and extrusion with the content of UV and TS stabilizer predetermins products for external use. Delivered in natural mode and in the full RAL colour scale.Packagin..
Melting Point 222 °C
432 °F
Plastcom SLOVAMID 6 GF 65/1M PA6 reinforced with 65% glass fibre
Features: PA 6 for injection moulding, chemically strengthened with 65% of glass fibre, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-go..
Melting Point 222 °C
432 °F
STN EN 11357-1
Plastcom SLOVAMID® 6 NG1 GF 30 HLS PA6 reinforced with glass fiber, UV stabilized, hydrolysis resistant
PA 6 for injection molding, reinforced with 30% glass fiber, for moldings used in the automotive, weather and UV stabilized. Determined for using in outside automotive applications like door handle,..
Melting Point 222 °C
432 °F
DSC; STN EN ISO 3146
Plastcom SLOVAMID 6 GF 10 FRG 5 Polyamide 6, 10% Glass Fiber, Flame Retardant
FeaturesPA 6 for injection moulding, chemically strengthened with 10% glass fiber. Application: impacted mouldings with high strength applied in automotive, electrical, engineering and consumer-goo..
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
Lanxess Durethan® B 40 FA 000000 Nylon 6, Film Grade
PA 6, film grade of high viscosity, lubricated, not nucleated, in compliance with FDA for food contact and acc. the German BgVV Recommendation XLIV, Section VI.A" Synthetic casings in polyamide"Appl..
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
Lanxess Durethan® BC 30 000000 Nylon 6
PA 6, injection molding grade, non-reinforced, rapid processing, higher notched impact strength than B 30 S / B 31 SK in dry and conditioned state, impact-modified
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
Lanxess Durethan® BKV 35 HTS 901510 Nylon 6, 35% Glass Fiber
PA 6, injection molding grade, 35% glass fibers, very good heat-ageing resistance
Melting Point 222 °C
432 °F
10 °C/min; ISO 11357-1,-3
Lanxess Pocan® BF 4232 000000 PBT, 30% Glass Fiber
PBT, 30% glass fiber, injection molding, flame retardantInformation provided by LANXESS.
Melting Point 222 °C
432 °F
ISO 11357-1,-3
Lanxess Durethan® BM 240 H3.0 000000 Nylon 6, 40% Mineral
PA 6, 40% mineral, injection molding, heat-ageing stabilized, low tendency to warp, isotopic properties
Melting Point 222 °C
432 °F
ISO 3146-C
Solvay Technyl® C 206 Nylon 6, EH0
Unreinforced Plyamide PA6, standard for fast cycling, for injection molding.Technyl C 206 has high fluidity and good mold release, favored by a high crystallization rate. It is specially suitable f..
Melting Point 222 °C
432 °F
Solvay TECHNYL® C 218 V 50 PA6, 50% glass fiber, Eh 0
Description: TECHNYL C 218 V50 is a polyamide 6 reinforced with 50% of glass fiber with excellent thermal stabilityColors: it is supplied in natural color and black color.Available in: Latin America..
Melting Point 222 °C
432 °F
ISO 11357
Solvay TECHNYL® C 230 PA6, DRY
Description: Unreinforced polyamide PA6, with improved impact resistance, for injection molding.Available in: EuropeProduct Applications: This grade has improved impact strength and higher flexibili..
Melting Point 222 °C
432 °F
ISO 11357
Solvay TECHNYLSTARâ„¢ S 218 V35 PA6, 35% glass filled, DRY
Description: TECHNYL STAR Polyamide, reinforced with 35% of glass fiber, heat stabilized, for injection molding. Characterized by a high fluidity of the melt. Available in: Europe and North America ..
Melting Point 222 °C
432 °F
Samyang Tribit® 1503S Polybutylene Terephthalate
Characteristics:High impactApplications:AutomotiveConnectorGearOutdoor handleIgnition systemElectronicConnectorGas valveCoil bobbinSwitch caseRelay caseO/A partsAll information provided by Samyang
Melting Point 222 °C
432 °F
ISO 3146-C
Solvay Technyl Starâ„¢ S 218 V50 50% Glass Reinforced Nylon 6
Heat stabilized, low viscosity, injection grade.Information provided by Rhodia; Rhodia has been acquired by Solvay.
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
EMS-Grivory Grivory® B 70 GFE 15 H PA6-GF15
Product description: Grilon B 70 GFE 15 H is a impact modified, heat stabilized PA 6 injection molding grade with 15% glass fiber reinforcement. Grilon B 70 GFE 15 H has the following important prop..
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
EMS-Grivory Grivory® BG-30 S PA6-GF30
Product description: Grilon BG-30 S is a heat stabilized PA6 injection molding grade with 30% glass fibers. Grilon BG-30 S has the following important properties: Excellent surface finishEasy flowin..
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
EMS-Grivory Grivory® BG-40 FC PA6-GF40
Product description: Grilon BG-40 FC is a heat stabilized PA6 injection molding grade with 40% glass fibers. Grilon BG-40 FC has the following important properties: High stiffnessExcellent surface f..
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
EMS-Grivory Grivory® BGM-40 X PA6-(GF+MD)40
Product description: Grilon BGM-40 X is a heat stabilized PA 6 injection molding grade with a 40 % reinforcement combination (mineral and glass fiber). Grilon BGM-40 X has the following important pr..
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
EMS-Grivory Grivory® BGZ-50/2 PA6-I-GF50
Information provided by EMS Grivory
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
EMS-Grivory Grivory® EBV-15H black 9697 PA6-GF15
Product description: Grilon EBV-15H black 9697 is a high viscosity, heat stabilized PA6 extrusion blow molding grade with 15% glass fibers. Grilon EBV-15H black 9697 has the following important prop..
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
EMS-Grivory Grivory® XE 4073 nat PA610
Product description: Grilamid XE 4073 natural is a unreinforced, heat and UV stabilized polyamide 610 (PA610) injection molding grade. This product is to a large extent based on renewable raw materi..
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
DuPont Performance Polymers Hytrel® BM6574 BK316 TPC-ET  (Unverified Data**)
Hytrel® BM6574 is a 65 nom. Shore D, plasticiser free high performance resin for blow molding and extrusion; it shows ageing resistance up to 150°C, and excellent mechanical properties at elevated..
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
EMS-Grivory Grivory® BG-50 HM PA6-GF50
Product description: Grilon BG-50 HM is a heat stabilized, normal viscosity, and adhesion modified PA6 injection molding grade with 50% glass fibers. Grilon BG-50 HM has the following important prop..
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
EMS-Grivory Grivory® BGK-30 X PA6-(GF+GB)30
Information provided by EMS Grivory
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
EMS-Grivory Grivory® BGZ-30 PA6-GF30
Product description: Grilon BGZ-30 is a normal viscosity, heat stabilized and impact modified PA 6 injection molding type with 30% glass fibers. Grilon BGZ-30 has the following important properties:..
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
EMS-Grivory Grivory® BR 40 PA6
Product description: Grilon BR 40 is a medium viscosity, unreinforced, heat stabilized PA6 grade for injection mounding and extrusion applications. Grilon BR 40 has the following important propertie..
Melting Point 222 °C
432 °F
ASTM D789
Adell BH-18 Nylon 6, 40% Mineral Filled
Data provided by Adell Plastics, Inc.
Melting Point 222 °C
432 °F
ASTM D789
Adell BR-13 Nylon 6, 15% Glass Reinforced
Data provided by Adell Plastics, Inc.
Melting Point 222 °C
432 °F
ASTM D3418
Ashley Polymers Ashlene® 833 Nylon 6
Basic Nylon 6 medium viscosity, with high residual monomer. Highly flexible and high strength, particularly suited for monofilament extrusion.Data provided by the manufacturer
Copyright © lookpolymers.com All Rights Reserved