Polymer Property : Tensile Strength = 34.5 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength	34.5 MPa	5000 psi	ASTM D638
Quadrant EPP Techtron® PSBG PPS, Polyphenylene sulfide, bearing grade, compression molded (ASTM Product Data Sheet)
Tensile Strength	34.5 MPa	5000 psi	ASTM D638
Quadrant EPP Techtron® PSGF PPS - Compression Molded 40% Glass Reinforced Polyphenylene Sulfide (ASTM Product Data Sheet)
Tensile Strength	34.5 MPa	5000 psi	ASTM D412
Parker Chomerics CHO-THERM® 1646 Non-Insulating Interface Material Description: CHO-THERM® 1646 pads offer the best available thermal performance, without the use of grease, in applications where electrical isolation is not required. The low thermal impedance of C..
Tensile Strength	34.5 - 41.4 MPa	5000 - 6000 psi	ASTM D638
Mar-Bal MB1000-10 Thermoset Polyester Composite Molding Compound A general purpose material that is easily customized. Designed for Powder Coating and Electrostatic painting.Mar-Bal standard grades can be injection, compression and transfer molded.Information pro..
Tensile Strength	34.5 - 55.2 MPa	5000 - 8000 psi	ASTM D638
Mar-Bal MB2000-20 Thermoset Polyester Composite Molding Compound An excellent flame and track resistant material with excellent electrical and mechanical properties. Good dielectric strength and low shrink for close dimensional control.Mar-Bal standard grades can..
Tensile Strength	34.5 - 41.4 MPa	5000 - 6000 psi	ASTM D638
Mar-Bal MB3000-15NY Thermoset Polyester Composite Molding Compound A superior chemical resistant material with excellent flame and track resistance.Mar-Bal standard grades can be injection, compression and transfer molded.Information provided by Mar-Bal, Inc.
Tensile Strength	34.5 - 44.8 MPa	5000 - 6500 psi	ASTM D638
Mar-Bal MB4000 Thermoset Polyester Composite Molding Compound The high track resistant material. A flame retardant polyester molding compound with moderate strength and excellent electrical properties and exceptional arc and track resistance. Suitable for repl..
Tensile Strength	34.5 MPa	5000 psi	ASTM D1708
Garlock GYLONÂ® 3522 PTFE Diaphragm GYLON PTFE diaphragmWithstands aggressive chemicals and temperatures up to +500Â°F (+260Â°C).Up to four times the flex life of conventional PTFEReduced void content - less permeation, increased ..
Tensile Strength	34.5 MPa	5000 psi	across grain; ASTM F152
Garlock GYLONÂ® HP3560 PTFE Gasketing, Steel Insert GylonÂ® with perforated 316LSS insertPerforated stainless steel core increases resistance to pressure fluctuations and thermal cyclingGYLONÂ® offers superior cold flow and creep resistance, elim..
Tensile Strength	34.5 MPa	5000 psi	across grain; ASTM F152
Garlock GYLONÂ® HP3561 PTFE Gasketing, Steel Insert GylonÂ® with perforated 316LSS insertPerforated stainless steel core increases resistance to pressure fluctuations and thermal cyclingGYLONÂ® offers superior cold flow and creep resistance, elim..
Tensile Strength	34.5 MPa	5000 psi	across grain; ASTM F152
Garlock GYLONÂ® HP3563 PTFE Gasketing, Steel Insert, Oxygen Service GylonÂ® with perforated 316LSS insert - Oxygen servicePerforated stainless steel core increases resistance to pressure fluctuations and thermal cyclingGYLONÂ® offers superior cold flow and creep..
Tensile Strength	34.5 - 48.3 MPa	5000 - 7000 psi
MichelmanÂ® HydrosizeÂ® U2-01 Nonionic polyurethane emulsion Description: Nonionic polyurethane emulsionUsage: HydrosizeÂ® U2-01 is a high strength sizing for glass and carbon chopped fiber with excellent adhesion.Information provided by MichelmanÂ®
Tensile Strength	34.5 - 48.3 MPa	5000 - 7000 psi
MichelmanÂ® HydrosizeÂ® U2022 Nonionic polyurethane emulsion Description: Nonionic polyurethane emulsionUsage: HydrosizeÂ® U2022 is an APE free, high strength sizing for glass and carbon chopped fiber, with excellent adhesion.Information provided by Michelm..
Tensile Strength	>= 34.5 MPa	>= 5000 psi	Measured on solution cast film from toluene; BAM 1245
KratonÂ® A1536 H (SEBS) Linear Triblock Copolymer Description: Kraton A1536 H is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified: Kraton A1536 HU - supplied to cu..
Tensile Strength	34.5 MPa	5000 psi	Typical properties of film cast from toluene solution; ASTM D412
KratonÂ® FG1901 G (SEBS) grafted with MA Description: Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form id..
Tensile Strength	34.5 MPa	5000 psi	ASTM D412
KratonÂ® G1650 M (SEBS) Linear Triblock Copolymer Description: Kraton G1650 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form ide..
Tensile Strength	34.5 MPa	5000 psi	across grain; ASTM F152
Garlock GYLONÂ® HP3562 PTFE Gasketing, Steel Insert, Oxygen Service GylonÂ® with perforated 316LSS insert - Oxygen servicePerforated stainless steel core increases resistance to pressure fluctuations and thermal cyclingGYLONÂ® offers superior cold flow and creep..
Tensile Strength	34.5 MPa	5000 psi	Typical properties of film cast from toluene solution; ASTM D412
KratonÂ® FG1901 G (SEBS) grafted with MA Description: Kraton FG1924 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13% . It is supplied from North America in the physical form i..
Tensile Strength	34.5 MPa	5000 psi	ASTM D638, ASTM D1708
ScanTube PVDF Tubing Information provided by ScanTube, Inc.
Tensile Strength	34.5 MPa @Temperature 23.9 °C	5000 psi @Temperature 75.0 °F
Master Bond MB250NT Low viscosity ethyl cyanoacrylate Master Bond MB250NT is a single component ethyl cyanoacrylate type system. This rapid curing, high strength system is used primarily in applications where the ISO 10993-5 for low toxicity is specifi..
Tensile Strength	34.5 MPa	5000 psi	ASTM D412
Lubrizol ESTANE® 58237 Ether Based Thermoplastic Polyurethane Features: High moisture vapor transmission. Good physical properties and elasticity.Uses: Blown and flat die/cast film extrusion.Available in Americas, Europe, Middle East, Africa, India and AsiaInf..
Tensile Strength	>= 34.5 MPa	>= 5000 psi
Master Bond EP30LTE-LO Dimensionally Stable Low Outgassing Two Part Epoxy Master Bond Polymer System EP30LTE-LO is a thermal shock resistant epoxy resin system with low thermal expansion properties and dimensional stability for high performance bonding, sealing and castin..
Tensile Strength	>= 34.5 MPa	>= 5000 psi
Master Bond UV15DC80 One Component, UV and Heat Curable Epoxy System Master Bond UV15DC80 is a special dual cure epoxy based system which offers a primary cure utilizing UV light along with a secondary heat curing mechanism. This system addresses the problem of curin..
Tensile Strength	34.5 MPa	5000 psi	ASTM D638
Ecomass® 1050ZD96 Tungsten Powder Filled Polyamide Alloy, Injection Molding Grade High Specific Gravity, Tungsten Powder Filled Polyamide (PA) Alloy, Good Toughness, Product Form - PelletsProcessing Method: Injection MoldingNontoxic alternative to Lead, weighting, balancing and ..
Tensile Strength	34.5 MPa	5000 psi	2 in/min; ASTM D638
Braskem FF026M Homopolymer Polypropylene Description: Excellent Color and Processing Stability, Superior Optical and Mechanical Properties, Broad Processing WindowApplications: Suggested Uses Include BOPP ApplicationsThis resin meets the r..
Tensile Strength	34.5 MPa	5000 psi	ASTM D412/D638
Lubrizol ESTANE® 5778 Ester Based Thermoplastic Polyurethane Features: It is especially well suited for dispersing co-ferrite as well as Cr02 pigments used in video, audio, and data storage applications. This product offers excellent hydrolytic stability unde..
Tensile Strength	34.5 MPa	5000 psi
Henkel Hysol EA 9320NA Paste Adhesive System High shear and high peel adhesive system with room temperature cure.
Tensile Strength	34.5 MPa	5000 psi
Henkel SynCore HC 9875 Syntactic Film High crush strength, low density syntactic core material, co-curable with a variety of 350°F / 177°C curing epoxy prepregs.