Physical Properties | Metric | English | Comments |
---|---|---|---|
Melt Flow | 1.5 g/10 min | 1.5 g/10 min | (Condition L) ASTM D-1238 |
Multibase Multi-Flex® TPE A 8103 BLK Multi-Flex® A 8103 is a moderately low price TPE that has a god tensile and tear strength as well as very good elasticity. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
Melt Flow | 1.5 g/10 min @Load 2.16 kg, Temperature 230 °C |
1.5 g/10 min @Load 4.76 lb, Temperature 446 °F |
STN EN ISO 1133 |
Plastcom PLASTALEN® EQ 18 N Polyethylene Impact modified PE for extrusion. Delivered in black color.Information Provided by Plastcom spol. s r.o. |
|||
Melt Flow | 1.5 g/10 min | 1.5 g/10 min | ASTM D1238 |
Celanese Celcon® M15HP POM
(Unverified Data**) Celcon® acetal copolymer grade M15HP is a creep resistant, high viscosity polymerStandard extruders with a length to diameter ratio of at least 20:1 are recommended. The screw should be a high com.. |
|||
Melt Flow | 1.5 g/10 min | 1.5 g/10 min | ExxonMobil Method |
ExxonMobil Escorene® LD 720.92 Specialty Film Resin
(discontinued **) Escorene Ultra LD 720 resins are high vinyl acetate copolymer specialty film resins designed for applications requiring outstanding heat sealability, along with excellent strength properties and tou.. |
|||
Melt Flow | 1.5 - 2.5 g/10 min | 1.5 - 2.5 g/10 min | |
Kazanorgsintez 107-277 Low Density Polyethylene Composition with Improved Processibility Production Method: Compositions are produced from low density polyethylene with additives. Application: Intended for cable core lapping.Information Provided by Kazanorgsintez |
|||
Melt Flow | 1.5 - 2.0 g/10 min @Load 2.16 kg, Temperature 190 °C |
1.5 - 2.0 g/10 min @Load 4.76 lb, Temperature 374 °F |
|
Kazanorgsintez PE2NT74-15 High Density Polyethylene for Blow Molding Production Method: Gaseous-phase method. Application: Compositions are intended for goods produced by injection molding method.Information Provided by Kazanorgsintez |
|||
Melt Flow | 1.5 g/10 min | 1.5 g/10 min | ASTM D1238 |
LyondellBasell Aquathene® AQ120000 Ethylene Vinylsilane Copolymer ApplicationsAQUATHENE AQ 120-000 is an ethylene vinylsilane copolymer designed for use in low voltage, power cable applications. This natural resin can be crosslinked, by exposure to moisture after.. |
|||
Melt Flow | 1.5 g/10 min | 1.5 g/10 min | ASTM D1238 |
I. Stern 745 Super High Impact Natural ABS Features:Super High ImpactExtrusionApplicationsPipeProfilesSheetInformation provided by I. Stern & Co. Inc. |
|||
Melt Flow | 1.5 g/10 min @Load 2.16 kg, Temperature 230 °C |
1.5 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
LG Chemical LUPOL GP1007FE Flame Retardant PP Description: Injection Molding, FR PP, General Purpose, Flame RetardantApplication: Electrical & Electronic, Automotive PartsCAS: 9003-07-0 and 1309-64-4Information provided by LG Chemical |
|||
Melt Flow | 1.5 - 2.1 g/10 min @Load 2.16 kg, Temperature 190 °C |
1.5 - 2.1 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238-00 |
Ipiranga Petrochem PH 0141 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr.. |
|||
Melt Flow | 1.5 g/10 min @Load 2.16 kg, Temperature 230 °C |
1.5 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
Kuraray SEPTON® S4030 Thermoplastic Rubber SEPTON® is a series of high performance thermoplastic rubbers developed by Kuraray Co. Ltd. using its isoprene technology. SEPTON® resins are hydrogenated styrenic block copolymers, which exhi.. |
|||
Melt Flow | 1.5 g/10 min | 1.5 g/10 min | ISO 1133 |
Lucite International Diakon® Frost 952 70 Acrylic Polymer Information provided by Lucite International |
|||
Melt Flow | 1.5 g/10 min @Load 2.16 kg, Temperature 230 °C |
1.5 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
Multibase Multi-Flex® A 7802 TPE Blk Thermoplastic Elastomer Forms: PelletsProcessing Methods:Injection Molding Information provided by Multibase |
|||
Melt Flow | 1.5 - 3.0 g/10 min @Load 5.00 kg, Temperature 372 °C |
1.5 - 3.0 g/10 min @Load 11.0 lb, Temperature 702 °F |
ASTM D1238 |
Solvay Specialty Polymers Hyflon® PFA 420 Perfluoroalkoxy (PFA) Hyflon® PFA is a family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat resistance.. |
|||
Melt Flow | 1.5 g/10 min @Load 3.80 kg, Temperature 230 °C |
1.5 g/10 min @Load 8.38 lb, Temperature 446 °F |
ASTM D1238 |
Techmer ES Plastiblend® PC/ABS 720 BK Availability: North AmericaForms: PelletsAppearance: BlackInformation provided by TP Composites, Inc. |
|||
Melt Flow | 1.5 g/10 min @Load 2.16 kg, Temperature 190 °C |
1.5 g/10 min @Load 4.76 lb, Temperature 374 °F |
|
Silon Tabond 2003 Adhesive Resin TABOND 2003 is a ethylene-octene copolymer modified with maleic anhydride functional groups.Characteristics: • Strong adhesion to aminosilane treated glass, Nylon, EVOH, PET, PBT, PC, aluminium.. |
|||
Melt Flow | 1.5 g/10 min @Load 5.00 kg, Temperature 200 °C |
1.5 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
Teknor Apex MONPRENE® MP 2740 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
Melt Flow | 1.5 g/10 min | 1.5 g/10 min | |
Teknor Apex Telcar® TL-2596B Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets .. |
|||
Melt Flow | 1.5 g/10 min @Load 2.16 kg, Temperature 190 °C |
1.5 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 - ISO 1133 |
DuPont Elvaloy® 3117 AC Ethylene and 17% Butyl Acrylate Copolymer Elvaloy® 3117 AC is intended for coextrusion and compounding. Due to its high melt flow rate, it is used also in extrusion coating. Elvaloy® 3117 AC is soft, flexible and has good adhesion to va.. |
|||
Melt Flow | 1.5 g/10 min @Temperature 230 °C |
1.5 g/10 min @Temperature 446 °F |
Condition L; ASTM D1238 |
A. Schulman PP 2407 Polypropylene Impact Resistant Copolymer Polypropylene DescriptionPolypropylene PP 2407 is a low flow, impact resistant copolymer polypropylene. Information provided by A. Schulman. |
|||
Melt Flow | 1.5 g/10 min @Load 2.16 kg, Temperature 230 °C |
1.5 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D 1238 |
RTP Company RTP 107 Polypropylene (PP), Glass Fiber |
|||
Melt Flow | 1.5 g/10 min @Load 16.0 kg, Temperature 230 °C |
1.5 g/10 min @Load 35.3 lb, Temperature 446 °F |
ASTM D-1238 |
Dynasol Calprene® H6110 Hydrogenated Rubber SEBS Calprene H 6110 is a 70/30 Ethylene-Butylene/Styrene thermoplastic copolymer, polymerized in solution and having a linear structure with excellent ozone resistance.This product is available in:CH 61.. |
|||
Melt Flow | 1.5 g/10 min | 1.5 g/10 min | ASTM D1238 |
Aclo Accutech Polypropylene Homopolymer HP0334G15M15CL Glass/Mineral Reinforced Coupled |
|||
Melt Flow | 1.5 g/10 min | 1.5 g/10 min | ASTM D1238 |
Aclo Accutech Polypropylene Homopolymer HP0334G20M10CL Glass/Mineral Reinforced Coupled |
|||
Melt Flow | 1.5 - 2.5 g/10 min @Load 2.16 kg, Temperature 190 °C |
1.5 - 2.5 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Arkema Group Orevac® 9314 Film EVA-MAH Terpolymer EVA Terpolymers based Main Application: Blown film coextrusionInformation provided by Arkema Group |
|||
Melt Flow | 1.5 g/10 min @Load 2.16 kg, Temperature 230 °C |
1.5 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238L |
Braskem H 603 Blow Molding Polypropylene Description: H 603 is a low melt flow rate homopolymer used for general purposes. This resin is designed for blow moulding and extrusion applications. H 603 exhibits excellent processability, excell.. |
|||
Melt Flow | 1.5 - 6.0 g/10 min @Load 2.16 kg, Temperature 200 °C |
1.5 - 6.0 g/10 min @Load 4.76 lb, Temperature 392 °F |
ASTM D1238 |
BecauseWeCare BF90 Biodegradable Plastic Biodegradable and compostable product produced from corn and developed to break down within weeks in a compost environment, without leaving any harmful residues in the process. Certified to the vari.. |
|||
Melt Flow | 1.5 g/10 min | 1.5 g/10 min | Condition not noted.; ASTM D1238 |
DuPont Elvax® 3169 Ethylene-Vinyl Acetate Copolymer Resin for Coextrusion, Blown Film
(discontinued **) 18 wt% Vinyl Acetate.General Elvax® information: Elvax® packaging grade resins include low seal temperatures for use in coextrusions or for packaging temperature sensitive materials, excellent dra.. |
|||
Melt Flow | 1.5 g/10 min @Load 2.16 kg, Temperature 190 °C |
1.5 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Celanese Ateva® 1030 Film Ethylene Vinyl Acetate Copolymer Film Ateva® 1030 resin is well suited for film extrusion applications. This EVA resin may be safely used as articles or components of articles intended for uses in contact with food as provided in FDA .. |
|||
Melt Flow | 1.5 g/10 min @Load 5.00 kg, Temperature 200 °C |
1.5 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
LG Chemical LG-512 Styrene-Butadiene-Styrene Description: Linear structure, Non-Oil Extended Grade Thermoplastic ElastomerApplication: Asphalt Modifier, Plastic Modifier, Compounding, Adhesives etcCAS No. 9003-55-8Information provided by LG Ch.. |