Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Flow = 1.5 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Melt Flow 1.5 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.5 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ISO 1133
Polimeri Europa Clearflex® H&T FHH 508 Octene Copolymer Linear Medium Density Polyethylene
Clearflex H&T FHH 508 is an octene copolymer linear medium density polyethylene (C8-LMDPE), with antioxidant, suitable for blown film extrusion.Films obtained from Clearflex H&T FHH 508 show good op..
Melt Flow 1.5 g/10 min

@Load 3.80 kg,
Temperature 230 °C
1.5 g/10 min

@Load 8.38 lb,
Temperature 446 °F
ASTM D 1238
SABIC Innovative Plastics Cycolac® X17 ABS
Automotive: Very high heat resistance with high strength and modulus. UL94 HB rated.This data was supplied by SABIC-IP for the Americas region.
Melt Flow 1.5 g/10 min

@Load 5.00 kg,
Temperature 230 °C
1.5 g/10 min

@Load 11.0 lb,
Temperature 446 °F
ISO 1133
Premix Thermoplastics PRE-ELEC® PP 1380
PRE-ELEC PP 1380 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a very low electrical resistivity PR..
Melt Flow 1.5 g/10 min

@Load 5.00 kg,
Temperature 200 °C
1.5 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM Data
Americas Styrenics Styron® 663 Polystyrene  (discontinued **)
STYRON® 663 general purpose polystyrene resin is an additive free resin with excellent strength, clarity, and high heat resistance. When used unmodified for the manufacture of food contact articles..
Melt Flow 1.5 g/10 min
1.5 g/10 min
Exxon Method
ExxonMobil Escorene® LD-613 EVA Injection Molding Resin  (discontinued **)
Data provided by the manufacturer, Exxon Chemical.An 8.8% vinyl acetate copolymer resin designed for molding and extrusion applications requiring low temperatures, flexibility and toughness. This r..
Melt Flow 1.5 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.5 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238 - ISO 1133
DuPont Bexloy® AXW504BK Modified Ionomer Resin  (discontinued **)
A modified ionomer resin engineered for injection molded exterior automotive applications.Availability: North AmericaInformation provided by DuPont.
Melt Flow 1.5 - 2.5 g/10 min
1.5 - 2.5 g/10 min
Kazanorgsintez 158-280 Low Density Polyethylene Composition with Improved Processibility
Production Method: Compositions are produced from low density polyethylene with additives. Application: Intended for cable core lapping.Information Provided by Kazanorgsintez
Melt Flow 1.5 - 2.5 g/10 min
1.5 - 2.5 g/10 min
Kazanorgsintez 162-281 Low Density Polyethylene Composition with Improved Processibility
Production Method: Compositions are produced from low density polyethylene with additives. Application: Intended for cable core lapping.Information Provided by Kazanorgsintez
Melt Flow 1.5 g/10 min
1.5 g/10 min
ASTM D1238
LyondellBasell Aquathene® AQ120000 Ethylene Vinylsilane Copolymer
ApplicationsAQUATHENE AQ 120-000 is an ethylene vinylsilane copolymer designed for use in low voltage, power cable applications. This natural resin can be crosslinked, by exposure to moisture after..
Melt Flow 1.5 - 2.5 g/10 min
1.5 - 2.5 g/10 min
Kazanorgsintez 108-278 Low Density Polyethylene Composition with Improved Processibility
Production Method: Compositions are produced from low density polyethylene with additives. Application: Intended for cable core lapping.Information Provided by Kazanorgsintez
Melt Flow 1.5 g/10 min
1.5 g/10 min
ASTM D1238
Shuman 211 Flame Retardant Polyphenylene Ether Copolymer Alloy
Black, Custom Colors. Excellent flame retardancy, easy processability, good impact strength, good chemical resistance, injection molding and extrusion grades.Data provided by the manufacturer.
Melt Flow 1.5 g/10 min

@Load 5.00 kg,
Temperature 200 °C
1.5 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Teknor Apex MONPRENE® MP 2740 Thermoplastic Elastomer
Information provided by Teknor Apex Company
Melt Flow 1.5 g/10 min

@Load 2.16 kg,
Temperature 230 °C
1.5 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ISO 1133
Borealis Borclear™ RB709CF Polypropylene Ethylene Copolymer
Borclear™ RB709CF is a propylene -ethylene copolymer. This grade is suitable for the manufacturing of unoriented film on blown film lines. Applications: Borclear™ RB709CF is recommended for seal..
Melt Flow 1.5 g/10 min

@Temperature 230 °C
1.5 g/10 min

@Temperature 446 °F
Condition L; ASTM D1238
A. Schulman PP 2407 Polypropylene Impact Resistant Copolymer Polypropylene
DescriptionPolypropylene PP 2407 is a low flow, impact resistant copolymer polypropylene. Information provided by A. Schulman.
Melt Flow 1.5 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.5 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238 - ISO 1133
DuPont Elvaloy® 3117 AC Ethylene and 17% Butyl Acrylate Copolymer
Elvaloy® 3117 AC is intended for coextrusion and compounding. Due to its high melt flow rate, it is used also in extrusion coating. Elvaloy® 3117 AC is soft, flexible and has good adhesion to va..
Melt Flow 1.5 g/10 min

@Load 2.16 kg,
Temperature 230 °C
1.5 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
A. Schulman PP 1407L-01 Polypropylene High-Impact Copolymer Polypropylene
DescriptionPolypropylene PP 1407L-01 is a super high-impact copolymer polypropylene.Information provided by A. Schulman.
Melt Flow 1.5 g/10 min

@Load 2.16 kg,
Temperature 230 °C
1.5 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
A. Schulman PP 1407L-01 Polypropylene High-Impact Copolymer Polypropylene
DescriptionPolypropylene PP 1407L-01 is a super high-impact copolymer polypropylene.Information provided by A. Schulman.
Melt Flow 1.5 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.5 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238, ISO 1133
DuPont™ Bynel® 4140 Anhydride Modified LLDPE
BYNEL® Series 4100 resins are anhydride-modified, linear low-density polyethylene (LLDPE) resins. All 4100 series resins are available in pellet form for use in conventional extrusion and coextrusi..
Melt Flow 1.5 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.5 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238, ISO 1133
DuPont™ Elvax® 3169Z Ethylene Vinyl Acetate
DuPont™ Elvax® 3169Z is an extrudable ethylene-vinyl acetate copolymer resin available in pellet form for use in conventional extrusion equipment designed to process polyethylene resins. ELVAX® 3..
Melt Flow 1.5 g/10 min

@Load 2.16 kg,
Temperature 235 °C
1.5 g/10 min

@Load 4.76 lb,
Temperature 455 °F
Arkema Group Rilsan® BESN F15 TL Nylon 11, Flexible Tubing Grade (Conditioned)
Designation ISO 1874-PA11-P,EHL,16-001High flexible grade for tubes extrusion. Available color: black and natural. Light and heat stabilized.High flexibility. High burst pressure and impact strength..
Melt Flow 1.5 g/10 min
1.5 g/10 min
ASTM D1238
Aclo Accutech Polypropylene Homopolymer HP0334G20M10CL Glass/Mineral Reinforced Coupled
Melt Flow 1.5 g/10 min
1.5 g/10 min
ISO 1133
Addiplast Addilene H 140 Polypropylene Homopolymer
Unreinforced, low flow for injection and extrusion, very translucentInformation provided by Addiplast.
Melt Flow 1.5 - 2.5 g/10 min

@Load 5.00 kg,
Temperature 232 °C
1.5 - 2.5 g/10 min

@Load 11.0 lb,
Temperature 450 °F
ASTM D1238
Arkema Group KYNAR® 1000 HD Polyvinylidene Fluoride Homopolymer - Injection Molding and Extrusion
Characteristics: Natural resin - translucent, off-white hemispheres. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical strength, low permeabili..
Melt Flow 1.5 g/10 min
1.5 g/10 min
Ashley Polymers Ashlene® ABS R214
Reprocessed for general purpose, general application, requiring good impact properties.Data provided by the manufacturer
Melt Flow 1.5 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.5 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
Multibase Multi-Flam™ 0803 LDPE NH Polyethylene
Features:Flame RetardantHalogen Content, Low to None Forms:PelletsProcessing Methods:Injection MoldingExtrusionCoextrusionUses:TubingPipingInformation provided by Multibase
Melt Flow 1.5 g/10 min
1.5 g/10 min
ASTM D1238
Huntsman PE1078 Film Extrusion Polyethylene  (discontinued **)
Homopolymer and FDA compliant.Features: Yields film with high clarity and excellent stiffness.Applications: Film extrusion: overwrap packaging.FDA Notes: Conforms to FDA regulation 21 CFR 177.1520 (..
Melt Flow 1.5 - 3.0 g/10 min

@Load 5.00 kg,
Temperature 372 °C
1.5 - 3.0 g/10 min

@Load 11.0 lb,
Temperature 702 °F
ASTM D1238
Solvay Specialty Polymers Hyflon® PFA 420 Perfluoroalkoxy (PFA)  (Unverified Data**)
Hyflon® PFA is a family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat resistance, ..
Melt Flow 1.5 g/10 min

@Load 2.16 kg,
Temperature 230 °C
1.5 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
Phillips 66 COPYLENE® CM015G Polypropylene Impact Copolymer
COPYLENE® CM015G is low melt flow impact copolymer with a barefoot additive package and is designed for excellent processing in injection molding and extrusion applications.Applications:Injection M..
Melt Flow 1.5 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.5 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238 - ISO 1133
DuPont Bexloy® AXW502NC010 Modified Ionomer Resin  (discontinued **)
A modified ionomer resin engineered for injection molded exterior automotive applications.Availability: North AmericaInformation provided by DuPont.
Melt Flow 1.5 g/10 min
1.5 g/10 min
ASTM D1238
Huntsman PE1353 EVA Film Extrusion  (discontinued **)
3.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: ..
Copyright © lookpolymers.com All Rights Reserved