Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.03 g/cc | 0.0372 lb/in³ | STN EN ISO 1183-1 |
Plastcom PLASTALEN® PQ 81 T 15/1 Polypropylene reinforced with mineral filler, impact modified Modified PP for injection molding with the content of 15% mineral filler. Application in automotive industry. Delivered in black grade.Information Provided by Plastcom spol. s r.o. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
Plastcom SLOVALEN PQ 81 T 15 PP, 15% mineral filling FeaturesModified PP for injection moulding with the content of 15% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decreased shrinkage. Gene.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | NCMT Method |
NCMT NanoPAC™ G2000 High Performance Polypropylene Nanocomposite Applications: Construction MaterialInformation provided by Nano Composite Materials Technology Limited |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
Imerys ImerPlastâ„¢ 15L Recycled Polyolefin for Pipe Extrusion Polyolefin/Mineral CompoundInformation provided by Imerys. |
|||
Density | 1.03 g/cc @Temperature 20.0 °C |
0.0372 lb/in³ @Temperature 68.0 °F |
|
LyondellBasell NMP N-methyl-2-pyrrolidone Available in electronic grade.Information provided by Lyondell. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 |
LyondellBasell Hostacomâ„¢ CB280F Thermoplastic Polyolefin Elastomer Description: Hostacomâ„¢ CB280F high melt flow, 1,900 MPa flexural modulus, UV-stabilized, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of processability, .. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 |
SABIC Innovative Plastics NORYL WCV072 PPE+PP (Europe-Africa-Middle East) Flexible, halogen free mPPE extrusion grade material for applications such as automotive wire insulation. Low specific gravity with good flame retardant and very good scrape abrasion resistance. De.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP LUBRICOMP ML004S PP LNP* LUBRICOMP* ML004S is a compound based on Polypropylene resin containing 20% PTFE. Added features of this material include: Wear Resistant, Heat Stabilized. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP THERMOCOMP MX95318 PP LNP* THERMOCOMP* MX95318 is a compound based on Polypropylene containing Proprietary Filler(s). |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 |
Styrolution Terluran® SP-6 ABS Description: High impact grade, suitable for extrusion.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
UBE UBESTA® 3030JI9L Plasticized Automotive Grade Nylon 12 Description: UBE UBESTA® Automotive grade Nylon 12Comments: meet DIN73378 PHLYInformation provided by UBE. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 - ISO 1183 |
DuPont Elvaloy® 4924 Ethylene/Vinyl Acetate/Carbon Monoxide Copolymer Specialized copolymers deliver flexibility, toughness and weatherability to adhesives, plastics, highways and roofing.Availability: GloballyInformation provided by DuPont. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
Washington Penn Polypropylene Copolymer 20% Glass Reinforced, 11 MFI Fiberglass & mineral-reinforced polypropylene compounds provide excellent tensile and impact properties. Mold shrinkage is similar to ABS and polystyrene. Compounds also have dimensional stability. .. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
Trelleborg Emerson & Cuming Stycast® 1365-65 Two-Component Epoxy Flexible Encapsulant Emerson & Cuming 1365-65 Stycast® Two-Component Epoxy Flexible EncapsulantDescriptionExcellent adhesion to a variety of substrates.FeaturesGood Chemical ResistanceUnfilledLow ViscosityMix Ratio (by.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 |
Chi Mei Polylac® PA-777B ABS - High Heat High Heat Impact |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
DuPont Performance Polymers Hytrel® 4068 Polyester Elastomer TPC-ET
(Unverified Data**) 40 Shore D High Performance Polyester Elastomer with Non-discoloring StabilizerInformation provided by DuPont Performance Polymers |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 |
Arkema Group ORGASOL® 2002 ES 4 Nat 3 Polyamide 12 Information provided by Arkema Group |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 |
Arkema Group ORGASOL® 2002 ES 6 Nat 3 Polyamide 12 Information provided by Arkema Group |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
Aclo Accutech Polypropylene Homopolymer HP0336C20L1 Calcium Reinforced |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
Ashley Polymers Ashlene® D927 Nylon 12 A flexible Nylon 12 with exceptional toughness, excellent abrasion and chemical resistance, outstanding low temperature performance, dimensional stability and low moisture absorption. Also availabl.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
Arkema Group Rilsan® BESVO A FDA Nylon 11 (Dry) Designation ISO 1874-PA11,E,22-010Rigid grade for tubes and films extrusion in food applications. Available color: natural. Additive free.Good thermal and chemical resistance. Transparency. Barrier .. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
Arkema Group Rilsan® BMF Nylon 11 (Conditioned) Designation ISO 1874-PA11,M,12-010Rigid grade for injection molding. Available color: natural. Additive free.Good melt viscosity. Outstanding ability to mold part with high length-thickness ratio an.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
Aclo Accucomp ABS ABS804L High Impact Grade |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
Ashley Polymers Ashlene® ABS Resin F-217 General purpose super high impact with good gloss.Data provided by the manufacturer |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
A. Schulman ComAlloy Comtuf® 164 Polypropylene, Mineral Reinforced, Chemically Coupled, Impact Modified Data provided by the manufacturer, ComAlloy International Company.20% Mineral Reinforced. Superior toughness and impact resistance characterize Comtuf® materialsThe ComAlloy product line has been i.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | DAM; ISO 1183 |
DuPont Performance Polymers Zytel® RS 3261THSL BK041A Nylon 610
(Unverified Data**) Zytel® RS 3261THSL BK041A is a renewably sourced polyamide 610 resin containing a minimum of 47% renewably sourced ingredient by weight. It is a black, unreinforced, toughened and heat stabilised r.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
Styron INSPIRE™ TF7000 ES Natural Performance Polymer INSPIRE* TF7000 ES Natural Performance Polymer DA™ is a very high stiffness (2400 MPa) TPO designed for instrument panel upper and lower components, as well as other interior trim applications wher.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | DAM; ISO 1183 |
DuPont Performance Polymers Zytel® RS 3261THSL BK041A Nylon 610
(Unverified Data**) Toughened Renewably Sourced Polyamide 610 Developed for Injection Molding Zytel RS 3261THSL BK041A is a renewably sourced polyamide 610 resin containing a minimum of 47% renewably sourced ingredient.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
Blue River Coatings Acrylic 4000 Topcoat BLUE RIVER COATINGS ACRYLIC 4000 TOPCOAT is a hard, flexible, economical coating designed for multiple substrates. BLUE RIVER COATINGS ACRYLIC 4000 TOPCOAT offers good application properties, low fo.. |