Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Cycolac® MG34LGHF ABS Low gloss, high flow ABS for unpainted interior applications.This data was supplied by SABIC-IP for the Americas region. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 |
Polykemi AB POLYasa 3010F Extra High Flow ASA Information provided by Polykemi AB |
|||
Density | 1.03 - 1.27 g/cc | 0.0371 - 0.0459 lb/in³ | Average value: 1.13 g/cc Grade Count:79 |
Overview of materials for Nylon 66/6 This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66/6". Each property range of values reported is minimum and maximum values of appropriate MatWeb .. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | Liquid Property |
Fibre Glast 1110 L Vinyl Ester Resin (Laminate Properties) #1110 is a low viscosity, corrosion resistant vinyl ester resin. It is formulated for maximum corrosion resistance to most fuels, vapors, and both acidic and basic chemicals. It is also heat resista.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | DIN 53479; ASTM D792 |
Kolon Kopa® KN161 Nylon 6 Resin KOPA is widely used in the automobile and industrial parts.General KOPA N-6 Features: Good mechanical properties, Extreme toughness, Outstanding self-lubrication and abrasion resistance, Excellent c.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
LyondellBasell Hifaxâ„¢ RTA3263EC/1 Thermoplastic Polyolefin Elastomer Description: Hifaxâ„¢ RTA3263EC/1 fractional melt flow, 1,700 MPa flexural modulus, mineral-filled, extrusion grade thermoplastic elastomeric olefin (TEO) resin has an excellent balance of stiffn.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
LyondellBasell Hifaxâ„¢ TRA-3263EC/1 Thermoplastic Olefin Resin Key Features: fractional melt flow, high modulus, extrusion grade thermoplastic olefin resin, high flexural modulus, high impact strength, good surface appearance, excellent processabilityApplicatio.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP LUBRILOY R2000 PA 66 LNP* LUBRILOY* R2000 is a compound based on Nylon 66 resin containing Proprietary Lubricant. Added feature of this material is: Wear Resistant. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
Solvay LUBRHOPHOS® LB 400 E Surfactant Identification: ETHOXYLATED OELYL-CETYL ALCOHOL, PHOSPHATE ESTERSolubility: Dispersible in water. Soluble in most polar and aromatic solvents.Available in: Asia Pacific, Europe, Latin America and No.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 |
Suzhou Hipro Polymers Hiprolon® 400 NN Nylon, dry Hiprolon® 400 NN is a medium viscosity specialty polyamide. Features: low density, low water absorption, high dimension stability, high notched impact resistance in large temperature ranges, and.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
Trelleborg Emerson & Cuming Stycast® 1365-65 Two-Component Epoxy Flexible Encapsulant Emerson & Cuming 1365-65 Stycast® Two-Component Epoxy Flexible EncapsulantDescriptionExcellent adhesion to a variety of substrates.FeaturesGood Chemical ResistanceUnfilledLow ViscosityMix Ratio (by.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
DuPont Performance Polymers Hytrel® 4068 Polyester Elastomer TPC-ET
(Unverified Data**) 40 Shore D High Performance Polyester Elastomer with Non-discoloring StabilizerInformation provided by DuPont Performance Polymers |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
Arkema Group Orgalloy® R 6600 Nylon 66 Alloy, Rigid Grade (Conditioned) Rigid polyamide 6.6 alloy: easy to process, low moisture absorption, chemical resistance (no known solvents).ISO data provided by the manufacturer, Arkema. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 |
Arkema Group Pebax® Rnew 40R53 SP 01 Polyether Block Amide (PEBA) Polyether block amide Pebax® 40R53 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
Aclo Accutech Polypropylene Copolymer CP0437M20L Mica Reinforced |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
Aclo Accutech Polypropylene Copolymer CP0437W20L Wollastonite Reinforced |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
Arkema Group Rilsan® BESN TL Nylon 11, Rigid Tubing Grade (Conditioned) Designation ISO 1874-PA11,EHL,22-010Rigid grade for tubes extrusion. Available colors: black and natural. Light and heat stabilized.High impact strength. High burst pressure. Good chemical resistanc.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 |
Arkema Group Rilsan® PA 11 G BMNO MED Nylon 11 Rilsan® PA 11 G BMNO MED is a polyamide produced from a renewable source. This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applic.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
BASF Monoethanolamine Pure 85% Solution Formula: C2H7NOCAS: 141-43-5Description: Monoethanolamine Pure 85% is a colorless to yellow liquid, with a perceptible amine-like odor. It is miscible with water.Synonyms: MEOA, 1-Amino-2-hydroxyet.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
3M Scotchgard™ Resilient Floor Protector Scotchgard Resilient Floor Protector is a high performance protective floor coating for vinyl tile and vinyl sheet flooring that utilizes multiple polymer technologies to produce a hard surface that.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
A. Schulman ComAlloy Aqualoy® 125 Polypropylene, Glass Reinforced, Chemically Coupled NSF, UL Data provided by the manufacturer, ComAlloy International Company.20% Glass Reinforced. In Aqualoy® materials, carefully selected base resins and proprietary additives meld hydrolytic stability an.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 |
Arkema Group ORGASOL® 2002 ES 5 Nat 3 Polyamide 12 Information provided by Arkema Group |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
Arkema Group Rilsan® BESN TL Nylon 11, Rigid Tubing Grade (Dry) Designation ISO 1874-PA11,EHL,22-010Rigid grade for tubes extrusion. Available colors: black and natural. Light and heat stabilized.High impact strength. High burst pressure. Good chemical resistanc.. |
|||
Density | 1.03 - 1.06 g/cc | 0.0372 - 0.0383 lb/in³ | Spec; ISO 1183-1 |
Axion Polymers Axpoly® PS01 3000 General Purpose Polystyrene PS01 Series polystyrenes offer the designer and processor a high performance polymer with well-defined properties in a range of options to suit many applications.The Axpoly® PS01 range of custom co.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | DAM; ISO 1183 |
DuPont Performance Polymers Zytel® RS 3261THSL BK041A Nylon 610
(Unverified Data**) Zytel® RS 3261THSL BK041A is a renewably sourced polyamide 610 resin containing a minimum of 47% renewably sourced ingredient by weight. It is a black, unreinforced, toughened and heat stabilised r.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 |
EMS-Grivory Grivory® XE 4208 black 9992 PA612-I Product description: Grilamid XE 4208 black 9992 is a semiflexible high viscosity, plasticized, high impact and highly heat resistant polyamide 612 (PA612) extrusion grade. Unique properties of Gril.. |
|||
Density | 1.03 - 1.95 g/cc | 0.0372 - 0.0704 lb/in³ | Average value: 1.72 g/cc Grade Count:31 |
Overview of materials for Vinyl Ester Sheet Molding Compound This property data is a summary of similar materials in the MatWeb database for the category "Vinyl Ester Sheet Molding Compound". Each property range of values reported is minimum and maximum value.. |
|||
Density | 1.03 g/cc | 0.0372 lb/in³ | |
Arkema Group Orgalloy® RS 60E10 Nylon 6 Alloy, Rigid Grade (Conditioned) RS 60 series, rigid polyamide 6 alloy: easy to process, chemical resistance (no known solvents) and low moisture absorption leading to stability of mechanical, electrical and dimensional properties.. |