POLYMER SEARCH

Styrolution TerluranÂ® HI-12 ABS

Category	Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Molded
Manufacturer	Styrolution
Trade Name	Terluran®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styrolution TerluranÂ® HI-12 ABS.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Terluran HI-12 is an injection molding grade of ABS with a very high toughness and easy flow.Very high toughnessEasy flowingUL 94 HB (1.6 & 3.2 mm)Information provided by Styrolution

Physical Properties	Metric	English	Comments
Density	1.02 g/cc	0.0368 lb/inÂ³	ISO 1183
Moisture Absorption at Equilibrium	0.21 % @Temperature 23.0 Â°C	0.21 % @Temperature 73.4 Â°F	50% RH; ISO 62
Water Absorption at Saturation	1.03 % @Temperature 23.0 Â°C	1.03 % @Temperature 73.4 Â°F	ISO 62
Linear Mold Shrinkage	0.0040 - 0.0070 cm/cm	0.0040 - 0.0070 in/in	ISO 294-4
Melt Flow	14 g/10 min @Load 10.0 kg, Temperature 220 Â°C	14 g/10 min @Load 22.0 lb, Temperature 428 Â°F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	101	101	IEC 2039-2
Ball Indentation Hardness	80.0 MPa	11600 psi	ISO 2039-1
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO 527
Elongation at Yield	2.7 %	2.7 %	ISO 527
Tensile Modulus	1.90 GPa	276 ksi	ISO 527
Flexural Strength	58.0 MPa	8410 psi	ISO 178
Izod Impact, Notched (ISO)	11.0 kJ/mÂ² @Temperature -30.0 Â°C	5.23 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 180/A
	31.0 kJ/mÂ² @Temperature 23.0 Â°C	14.8 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 180/A
	35.0 kJ/mÂ² @Temperature 23.0 Â°C	16.7 ft-lb/inÂ² @Temperature 73.4 Â°F	ASTM D 256
Charpy Impact Unnotched	16.0 J/cmÂ² @Temperature -30.0 Â°C	76.1 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179
	NB @Temperature 23.0 Â°C	NB @Temperature 73.4 Â°F	ISO 179
Charpy Impact, Notched	1.10 J/cmÂ² @Temperature -30.0 Â°C	5.23 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179
	3.00 J/cmÂ² @Temperature 23.0 Â°C	14.3 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear	80.0 - 110 Âµm/m-Â°C	44.4 - 61.1 Âµin/in-Â°F	ISO 11359
Thermal Conductivity	0.170 W/m-K	1.18 BTU-in/hr-ftÂ²-Â°F	DIN 52612-1
Maximum Service Temperature, Air	80.0 Â°C	176 Â°F
Deflection Temperature at 0.46 MPa (66 psi)	102 Â°C	216 Â°F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	97.0 Â°C	207 Â°F	ISO 75
Vicat Softening Point	96.0 Â°C @Load 5.10 kg	205 Â°F @Load 11.2 lb	50Â°C/h; ISO 306
	104 Â°C @Load 1.02 kg	219 Â°F @Load 2.25 lb	50Â°C/h; ISO 306
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+15 ohm-cm	>= 1.00e+15 ohm-cm	IEC 60093
Dielectric Constant	2.9 @Frequency 100 Hz	2.9 @Frequency 100 Hz	IEC 60250
Dissipation Factor	0.0054 @Frequency 100 Hz	0.0054 @Frequency 100 Hz	IEC 60250
	0.0082 @Frequency 1.00e+6 Hz	0.0082 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	230 - 260 Â°C	446 - 500 Â°F	ISO 294
Mold Temperature	40.0 - 60.0 Â°C	104 - 140 Â°F	ISO 294

Users viewing this material also viewed the following: