Styrolution LuranÂ® 378 P G7 35% Glass Filled SAN

Category	Polymer , Thermoplastic , SAN Polymer , Styrene Acrylonitrile (SAN), Molded, Glass Reinforced
Manufacturer	Styrolution
Trade Name	Luran®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styrolution LuranÂ® 378 P G7 35% Glass Filled SAN.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: Glass-reinforced grade with very high stiffness and low thermal coefficient of liner expansion.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS

Physical Properties	Metric	English	Comments
Density	1.36 g/cc	0.0491 lb/inÂ³	ISO 1183
Moisture Absorption at Equilibrium	0.25 %	0.25 %	23Â°C/50% RH; ISO 62
Linear Mold Shrinkage, Flow	0.0010 cm/cm	0.0010 in/in
Melt Flow	5.44 g/10 min @Load 10.0 kg, Temperature 220 Â°C	5.44 g/10 min @Load 22.0 lb, Temperature 428 Â°F	ISO 1133
	5.44 g/10 min @Load 21.6 kg, Temperature 200 Â°C	5.44 g/10 min @Load 47.6 lb, Temperature 392 Â°F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	93	93	ISO 2039-2
Ball Indentation Hardness	240 MPa @Load 36.5 kg, Time 30.0 sec	34800 psi @Load 80.5 lb, Time 0.00833 hour	ISO 2039-1
Tensile Strength at Break	110 MPa	16000 psi	ISO 527-1/-2
Elongation at Break	2.0 %	2.0 %	ISO 527-1/-2
Tensile Modulus	12.0 GPa	1740 ksi	ISO 527-1/-2
Flexural Strength	150 MPa	21800 psi	ISO 178
Izod Impact, Notched (ISO)	4.00 kJ/mÂ²	1.90 ft-lb/inÂ²	ISO 180/A
Charpy Impact Unnotched	1.70 J/cmÂ² @Temperature 23.0 Â°C	8.09 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 179/1eU
Charpy Impact, Notched	0.400 J/cmÂ² @Temperature 23.0 Â°C	1.90 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 179/1eA
Tensile Creep Modulus, 1000 hours	7500 MPa @Strain <=0.500 %	1.09e+6 psi @Strain <=0.500 %	ISO 899-1

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	25.0 Âµm/m-Â°C @Temperature 23.0 - 80.0 Â°C	13.9 Âµin/in-Â°F @Temperature 73.4 - 176 Â°F	ISO 11359-1/-2
Thermal Conductivity	0.190 W/m-K	1.32 BTU-in/hr-ftÂ²-Â°F	DIN 52612-1
Maximum Service Temperature, Air	90.0 Â°C	194 Â°F
Deflection Temperature at 0.46 MPa (66 psi)	108 Â°C	226 Â°F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	104 Â°C	219 Â°F	ISO 75-1/-2
Vicat Softening Point	109 Â°C	228 Â°F	VST B50; ISO 306
Flammability, UL94	HB @Thickness 0.800 mm	HB @Thickness 0.0315 in	IEC 60695-11-10
	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in	IEC 60695-11-10

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+14 ohm-cm	1.00e+14 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+15 ohm	>= 1.00e+15 ohm	IEC 60093
Dielectric Constant	3.2 @Frequency 1.00e+6 Hz	3.2 @Frequency 1.00e+6 Hz	IEC 60250
	3.5 @Frequency 100 Hz	3.5 @Frequency 100 Hz	IEC 60250
Dielectric Strength	39.0 kV/mm	991 kV/in	K20/P50; IEC 60243-1
Dissipation Factor	0.0070 @Frequency 100 Hz	0.0070 @Frequency 100 Hz	IEC 60250
	0.010 @Frequency 1.00e+6 Hz	0.010 @Frequency 1.00e+6 Hz	IEC 60250

Processing Properties	Metric	English	Comments
Melt Temperature	220 - 260 Â°C	428 - 500 Â°F	Injection Molding
Mold Temperature	60.0 - 80.0 Â°C	140 - 176 Â°F	Injection Molding
Drying Temperature	80.0 Â°C	176 Â°F	Pre-drying
Dry Time	2 - 4 hour	2 - 4 hour	Pre-drying

Descriptive Properties	Value	Comments
Color	Natural
Commercial Status	Europe
Primary Processing Technique	Injection Molding and Extrusion

Users viewing this material also viewed the following: