Solvay Specialty Polymers Primef® 4010 Polyphenylene Sulfide (PPS), 40% Glass Fiber Reinforcement (discontinu

Category	Polymer , Thermoplastic , Polyphenylene Sulfide (PPS) , Polyphenylene Sulfide (PPS) with 40% Glass Fiber Filler
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers Primef® 4010 Polyphenylene Sulfide (PPS), 40% Glass Fiber Reinforcement (discontinu.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Primef 4010 is a 40% glass fiber reinforced polyphenylene sulfide (PPS) that offers enhanced mechanical properties. In general, PPS offers an excellent balance of properties including high temperature resistance, chemical resistance, dimensional stability and electrical characteristics. Because of its inherent flame retardancy, PPS is a good choice for high-temperature electrical and electronic applications.Features: Flame Retardant; Good Chemical Resistance; Good Creep Resistance; Good Dimensional Stability; Good Processability; Good Strength; High Flow; High Heat Resistance; Low to No Water AbsorptionUses: Availability: EuropeHolding Time: 3 secCooling Time, 2 mm: 2.5 secInformation provide by Solvay Specialty Polymers

Physical Properties	Metric	English	Comments
Density	1.66 g/cc	0.0600 lb/in³	ISO 1183
Linear Mold Shrinkage	0.0010 - 0.0030 cm/cm	0.0010 - 0.0030 in/in	ISO 294-4

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	180 MPa @Temperature 23.0 °C	26100 psi @Temperature 73.4 °F	ISO 527-2
Elongation at Break	1.7 % @Temperature 23.0 °C	1.7 % @Temperature 73.4 °F	ISO 527-2
Tensile Modulus	14.0 GPa @Temperature 23.0 °C	2030 ksi @Temperature 73.4 °F	ISO 527-2
Flexural Strength	250 MPa @Temperature 23.0 °C	36300 psi @Temperature 73.4 °F	ISO 178
Flexural Modulus	14.0 GPa @Temperature 23.0 °C	2030 ksi @Temperature 73.4 °F	ISO 178
Izod Impact, Notched	0.850 J/cm	1.59 ft-lb/in	ASTM D256
Izod Impact, Unnotched	4.50 J/cm	8.43 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Thermal Conductivity	0.300 W/m-K	2.08 BTU-in/hr-ft²-°F	ISO 8302
Maximum Service Temperature, Air	220 °C	428 °F	ASTM D794
Deflection Temperature at 1.8 MPa (264 psi)	>= 260 °C	>= 500 °F	ISO 75-2/A
Flammability, UL94	V-0 @Thickness 0.800 mm	V-0 @Thickness 0.0315 in
Oxygen Index	51 %	51 %	ISO 4598-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	IEC 60093
Dielectric Constant	3.9 @Frequency 1.00e+6 Hz	3.9 @Frequency 1.00e+6 Hz	IEC 60250
	4.0 @Frequency 1000 Hz	4.0 @Frequency 1000 Hz	IEC 60250
Dielectric Strength	17.0 kV/mm	432 kV/in	IEC 60243-1
Dissipation Factor	0.0020 @Frequency 1000 Hz	0.0020 @Frequency 1000 Hz	IEC 60250
	0.0020 @Frequency 1.00e+6 Hz	0.0020 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	150 V	150 V	IEC 60112

Processing Properties	Metric	English
Rear Barrel Temperature	290 - 300 °C	554 - 572 °F
Middle Barrel Temperature	310 - 320 °C	590 - 608 °F
Front Barrel Temperature	320 - 330 °C	608 - 626 °F
Nozzle Temperature	320 - 350 °C	608 - 662 °F
Melt Temperature	320 - 330 °C	608 - 626 °F
Mold Temperature	150 - 160 °C	302 - 320 °F
Injection Pressure	50.0 - 150 MPa	7250 - 21800 psi
Hold Pressure	30.0 - 150 MPa	4350 - 21800 psi
Back Pressure	0.000 - 1.00 MPa	0.000 - 145 psi
Screw Speed	3.0 - 10 rpm	3.0 - 10 rpm

Descriptive Properties	Value	Comments
Additional Properties	Spiral Flow Length - Internal Method: 190 mm
Forms	Pellets
Injection Rate	Fast
Processing Method	Injection Molding
RoHS Compliance	RoHS Compliant

Users viewing this material also viewed the following: