SABIC Innovative Plastics LNP LUBRILOY RX05498 PA 66

Category	Polymer , Thermoplastic , Nylon , Nylon 66
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	LNP Lubriloy
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics LNP LUBRILOY RX05498 PA 66.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

LNP LUBRILOY* RX05498 is a compound based on Nylon 66 resin containing Proprietary Lubricant. Added features of this material include: High Impact, Wear Resistant.

Physical Properties	Metric	English	Comments
Density	1.10 g/cc	0.0397 lb/inÂ³	ASTM D792
	1.10 g/cc	0.0397 lb/inÂ³	ISO 1183
Moisture Absorption	0.700 %	0.700 %	50% RH, 24 hrs; ASTM D570
	1.12 %	1.12 %	23Â°C / 50% RH; ISO 62
Linear Mold Shrinkage, Flow	0.024 - 0.026 cm/cm @Time 86400 sec	0.024 - 0.026 in/in @Time 24.0 hour	ASTM D955
	0.0243 - 0.026 cm/cm @Time 86400 sec	0.0243 - 0.026 in/in @Time 24.0 hour	ISO 294
Linear Mold Shrinkage, Transverse	0.024 - 0.026 cm/cm @Time 86400 sec	0.024 - 0.026 in/in @Time 24.0 hour	ASTM D955
	0.0243 - 0.026 cm/cm @Time 86400 sec	0.0243 - 0.026 in/in @Time 24.0 hour	ISO 294

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	53.0 MPa	7690 psi	ASTM D638
	54.0 MPa	7830 psi	ISO 527
Tensile Strength, Yield	55.0 MPa	7980 psi	ISO 527
	59.0 MPa	8560 psi	ASTM D638
Elongation at Break	31 %	31 %	ASTM D638
	64 %	64 %	ISO 527
Elongation at Yield	8.0 %	8.0 %	ASTM D638
	16 %	16 %	ISO 527
Tensile Modulus	2.16 GPa	313 ksi	1 mm/min; ISO 527
	2.22 GPa	322 ksi	50 mm/min; ASTM D638
Flexural Strength	74.0 MPa	10700 psi	ISO 178
	80.0 MPa	11600 psi	ASTM D790
Flexural Modulus	2.00 GPa	290 ksi	ISO 178
	2.08 GPa	302 ksi	ASTM D790
Izod Impact, Notched	4.27 J/cm	8.00 ft-lb/in	ASTM D256
Izod Impact, Notched (ISO)	19.0 kJ/mÂ²	9.04 ft-lb/inÂ²	80104; ISO 180/1A
Izod Impact, Unnotched (ISO)	137 kJ/mÂ²	65.2 ft-lb/inÂ²	80104; ISO 180/1U
Dart Drop, Total Energy	76.0 J	56.1 ft-lb	Instrumented Impact Energy @ peak; ASTM D3763
Impact Test	65.0 J	47.9 ft-lb	Multiaxial Impact; ISO 6603
Coefficient of Friction, Dynamic	0.31	0.31	ASTM D3702 Modified
Coefficient of Friction, Static	0.18	0.18	ASTM D3702 Modified
K (wear) Factor	16.1 x 10^-8 mmÂ³/N-M	8.00 x 10^-10 inÂ³-min/ft-lb-hr	Washer; ASTM D3702 Modified

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	121 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	67.2 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	121 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	67.2 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
CTE, linear, Transverse to Flow	112 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	62.2 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	113 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	62.8 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi)	188 Â°C	370 Â°F	Flatw 80104 sp=64mm; ISO 75/Bf
	206 Â°C @Thickness 3.20 mm	403 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	67.0 Â°C	153 Â°F	Flatw 80104 sp=64mm; ISO 75/Af
	63.0 Â°C @Thickness 3.20 mm	145 Â°F @Thickness 0.126 in	unannealed; ASTM D648

Users viewing this material also viewed the following: