- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Injection Molded
- RheTech Products E204-00 High Density Polyethylene, Natural
RheTech Products E204-00 High Density Polyethylene, Natural
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Injection Molded |
| Manufacturer | RheTech Products |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | RheTech Products E204-00 High Density Polyethylene, Natural.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Applications: Electrical housingsUnderhood componentsConsumer GoodsInjection molding conditions reported in table.Information provided by RheTech Products.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.955 g/cc | 0.955 g/cc | 23/23°C; ASTM D792 |
| Linear Mold Shrinkage | 0.020 cm/cm | 0.020 in/in | ASTM D955 |
| Melt Flow | 35 g/10 min @Load 2.16 kg, Temperature 230 °C |
35 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 58 | 58 | ASTM D2240 |
| Tensile Strength at Break | 22.8 MPa | 3300 psi | 2 in/min; ASTM D638 |
| Flexural Modulus | 0.896 GPa | 130 ksi | Tangent; ASTM D790 |
| Izod Impact, Notched | 0.427 J/cm @Temperature 23.0 °C |
0.800 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
| Gardner Impact | 22.6 J | 16.7 ft-lb | ASTM D5420 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 65.0 °C | 149 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 44.4 °C | 112 °F | ASTM D648 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 149 - 160 °C | 300 - 320 °F | |
| Middle Barrel Temperature | 154 - 171 °C | 310 - 340 °F | |
| Front Barrel Temperature | 160 - 179 °C | 320 - 355 °F | |
| Nozzle Temperature | 160 - 171 °C | 320 - 340 °F | |
| Mold Temperature | 15.6 - 26.7 °C | 60.0 - 80.0 °F | |
| Drying Temperature | 37.8 - 48.9 °C | 100 - 120 °F | |
| Dry Time | 1 - 2 hour | 1 - 2 hour | |
| Moisture Content | <= 0.050 % | <= 0.050 % | Recommended |
| Injection Pressure | 2.76 - 10.3 MPa | 400 - 1500 psi | |
| Hold Pressure | 2.07 - 8.27 MPa | 300 - 1200 psi | |
| Back Pressure | 0.345 - 1.03 MPa | 50.0 - 150 psi |
Users viewing this material also viewed the following:
- Kraton® D1164 P (SIS) Linear Triblock Copolymer
- Kraton® FG1901 G (SEBS) Linear Block Copolymer
- Cossa Polimeri ESTADIENE 3008 MT Acrylonitrile Butadiene Styrene
- DuPont™ Bynel® 41E871 Anhydride Modified LLDPE
- Chosun Refractories MMCT-75 Special Castable
- BASF Ultramid® 8200 HS PA 6 (Dry)
- 3M Dyneon™ TFM™ 1630 PTFE (discontinued **)
- Pasargad Polymer Peyvand Pasamid 3P-M2000W Nylon 66
- Universal Wire Works ER310 Stainless Steel Bare Wire
- Resinlab® TL5021 Anaerobic Threadlocking Compound
Copyright © lookpolymers.com All Rights Reserved