POLYMER SEARCH

Ravago Manufacturing Americas Hylac® HF224 ABS

Category	Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Molded
Manufacturer	Ravago Manufacturing Americas, LLC
Trade Name	Hylac®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ravago Manufacturing Americas Hylac® HF224 ABS.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Entec's proprietary products include a full range of compounds in the Nylon 6/6, Nylon 6, ABS, PBT, Polycarbonate, PC/ABS, PC/ASA, PC/PBT, and PPO/PPE resin families.Information provided by Ravago.

Physical Properties	Metric	English	Comments
Density	1.05 g/cc	0.0379 lb/in³	ASTM D792
Linear Mold Shrinkage	0.0030 - 0.0070 cm/cm	0.0030 - 0.0070 in/in	ASTM D955
Melt Flow	7.0 g/10 min @Load 5.00 kg, Temperature 200 °C	7.0 g/10 min @Load 11.0 lb, Temperature 392 °F	ASTM D1238
	22 g/10 min @Load 3.80 kg, Temperature 230 °C	22 g/10 min @Load 8.38 lb, Temperature 446 °F	Cond I; ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	113	113	ASTM D785
Tensile Strength, Yield	35.9 MPa	5200 psi	ASTM D638
Elongation at Break	46 %	46 %	ASTM D638
Tensile Modulus	2.59 GPa	375 ksi	ASTM D638
Flexural Yield Strength	56.5 MPa	8200 psi	ASTM D790
Flexural Modulus	2.07 GPa	300 ksi	ASTM D790
Izod Impact, Notched	1.76 J/cm	3.30 ft-lb/in	0.25 in; ASTM D256
	1.98 J/cm	3.70 ft-lb/in	73°F, 0.125 in; ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	91.8 µm/m-°C @Temperature -40.0 - 176 °C	51.0 µin/in-°F @Temperature -40.0 - 349 °F	ASTM D696
Deflection Temperature at 0.46 MPa (66 psi)	97.8 °C	208 °F	Unannealed (0.250 in); ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	87.8 °C	190 °F	Unannealed (0.250 in); ASTM D648
Vicat Softening Point	105 °C	221 °F	ASTM D1525

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	ASTM D257

Processing Properties	Metric	English
Rear Barrel Temperature	179 - 199 °C	355 - 390 °F
Middle Barrel Temperature	199 - 221 °C	390 - 430 °F
Front Barrel Temperature	216 - 235 °C	420 - 455 °F
Nozzle Temperature	210 - 229 °C	410 - 445 °F
Melt Temperature	241 °C	465 °F
Mold Temperature	48.9 - 60.0 °C	120 - 140 °F
Moisture Content	<= 0.10 %	<= 0.10 %
Injection Pressure	5.86 - 6.89 MPa	850 - 1000 psi
Back Pressure	0.483 - 0.965 MPa	70.0 - 140 psi
Shot Size	40 - 80 %	40 - 80 %
Screw Speed	50 - 90 rpm	50 - 90 rpm

Descriptive Properties	Value	Comments
Holding Pressure	710 to 850 psi
Injection Rate	Slow-Moderate

Users viewing this material also viewed the following: