Polymer Resources PPX-EN-FR3 Modified-PPO, V-1 Flame Retardant, Extrusion Grade

Category	Polymer , Thermoplastic , Polyphenylene Ether/PPO , Polyphenylene Ether, Heat Resistant
Manufacturer	Polymer Resources, LTD
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Polymer Resources PPX-EN-FR3 Modified-PPO, V-1 Flame Retardant, Extrusion Grade.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Modified-Polyphenylene Oxide, V-1 Flame Retardant, 265F HDT, Extrusion GradeFeatures: • Bromine Free • Chlorine FreeProcess: ExtrusionNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by Polymer Resources Corporation.

Physical Properties	Metric	English	Comments
Specific Gravity	1.06 g/cc	1.06 g/cc	ASTM D792
Linear Mold Shrinkage	0.0050 - 0.0070 cm/cm	0.0050 - 0.0070 in/in	ASTM D955
Melt Flow	4.0 - 8.0 g/10 min @Load 11.6 kg, Temperature 250 °C	4.0 - 8.0 g/10 min @Load 25.6 lb, Temperature 482 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	119	119	ASTM D785
Tensile Strength at Break	62.1 MPa	9000 psi	ASTM D638
Tensile Strength, Yield	64.1 MPa	9300 psi	ASTM D638
Flexural Strength	89.6 MPa	13000 psi	ASTM D790
Flexural Modulus	2.41 GPa	350 ksi	ASTM D790
Izod Impact, Notched	1.33 J/cm @Temperature -40.0 °C	2.50 ft-lb/in @Temperature -40.0 °F	ASTM D256
	2.14 J/cm @Temperature 22.8 °C	4.00 ft-lb/in @Temperature 73.0 °F	ASTM D256
Gardner Impact	16.9 J	12.5 ft-lb	ASTM D3029

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	129 °C	265 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	121 °C	250 °F	ASTM D648
UL RTI, Electrical	65.0 °C @Thickness 0.749 mm	149 °F @Thickness 0.0295 in	UL 746
	110 °C @Thickness 1.50 mm	230 °F @Thickness 0.0591 in	UL 746
	110 °C @Thickness 1.70 mm	230 °F @Thickness 0.0669 in	UL 746
	110 °C @Thickness 3.00 mm	230 °F @Thickness 0.118 in	UL 746
UL RTI, Mechanical with Impact	65.0 °C @Thickness 0.749 mm	149 °F @Thickness 0.0295 in	UL 746
	110 °C @Thickness 1.50 mm	230 °F @Thickness 0.0591 in	UL 746
	110 °C @Thickness 1.70 mm	230 °F @Thickness 0.0669 in	UL 746
	110 °C @Thickness 3.00 mm	230 °F @Thickness 0.118 in	UL 746
UL RTI, Mechanical without Impact	65.0 °C @Thickness 0.749 mm	149 °F @Thickness 0.0295 in	UL 746
	105 °C @Thickness 1.50 mm	221 °F @Thickness 0.0591 in	UL 746
	105 °C @Thickness 1.70 mm	221 °F @Thickness 0.0669 in	UL 746
	105 °C @Thickness 3.00 mm	221 °F @Thickness 0.118 in	UL 746
Flammability, UL94	V-1 @Thickness 1.50 mm	V-1 @Thickness 0.0591 in
	V-1 @Thickness 3.00 mm	V-1 @Thickness 0.118 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+17 ohm-cm	1.00e+17 ohm-cm	ASTM D257
Dielectric Strength	24.0 kV/mm @Thickness 3.00 mm	610 kV/in @Thickness 0.118 in	ASTM D149
Comparative Tracking Index	250 - 400 V	250 - 400 V	UL 746
Hot Wire Ignition, HWI	>= 120 sec @Thickness 1.50 mm	>= 120 sec @Thickness 0.0591 in	UL 746
	>= 120 sec @Thickness 1.70 mm	>= 120 sec @Thickness 0.0669 in	UL 746
	>= 120 sec @Thickness 3.00 mm	>= 120 sec @Thickness 0.118 in	UL 746
High Amp Arc Ignition, HAI	60 - 120 arcs @Thickness 1.50 mm	60 - 120 arcs @Thickness 0.0591 in	UL 746
	60 - 120 arcs @Thickness 1.70 mm	60 - 120 arcs @Thickness 0.0669 in	UL 746
	60 - 120 arcs @Thickness 3.00 mm	60 - 120 arcs @Thickness 0.118 in	UL 746
High Voltage Arc-Tracking Rate, HVTR	80.0 - 150 mm/min	3.15 - 5.91 in/min	UL 746

Processing Properties	Metric	English
Rear Barrel Temperature	>= 204 °C	>= 400 °F
Middle Barrel Temperature	>= 227 °C	>= 440 °F
Front Barrel Temperature	>= 227 °C	>= 440 °F
Melt Temperature	227 - 254 °C	440 - 490 °F
Drying Temperature	104 - 110 °C	220 - 230 °F
Dry Time	3.00 - 4.00 hour	3.00 - 4.00 hour

Descriptive Properties	Value	Comments
Vent	0.001

Users viewing this material also viewed the following: