- HOME
- POLYMER SEARCH
- Polymer Property : Melt Flow = 8.0 g/10 min
Polymer Property : Melt Flow = 8.0 g/10 min Product List
Physical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow | 4.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
4.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
STN EN ISO 1133 |
| Plastcom PLASTALEN® EH 91 N Polyethylene HDPE regrind for injection molding. General use in all industry branches. Delivered in blue ( approx. RAL 5015) mode.Information Provided by Plastcom spol. s r.o. |
|||
| Melt Flow | 6.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
6.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238/L |
| NIZHNEKAMSKNEFTEKHIM PP 8300M (EPC30R) Propylene and Ethylene Block Polymer Product obtained by copolymerization of propylene with ethylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation r.. |
|||
| Melt Flow | 1.0 - 8.0 g/10 min @Load 11.6 kg, Temperature 250 °C |
1.0 - 8.0 g/10 min @Load 25.6 lb, Temperature 482 °F |
ASTM D1238 |
| Polymer Resources PPX-FRG10 Modified-PPO, V-1 Flame Retardant, 10% Glass Reinforced Modified-Polyphenylene Oxide, V-1 Flame Retardant, 10% Glass ReinforcedFeatures: • Bromine Free • Chlorine FreeProcess: Injection MoldingNotes: All physical, mechanical and thermal testing condu.. |
|||
| Melt Flow | 1.0 - 8.0 g/10 min @Load 11.6 kg, Temperature 250 °C |
1.0 - 8.0 g/10 min @Load 25.6 lb, Temperature 482 °F |
ASTM D1238 |
| Polymer Resources PPX-FRG30 Modified-PPO, V-1 Flame Retardant, 30% Glass Reinforced Modified-Polyphenylene Oxide, V-1 Flame Retardant, 30% Glass ReinforcedFeatures: • Bromine Free • Chlorine FreeProcess: Injection MoldingNotes: All physical, mechanical and thermal testing condu.. |
|||
| Melt Flow | 2.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 250 °C |
2.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 482 °F |
ASTM D1238 |
| Polymer Resources TP-GFMF1 Polybutylene Terephthalate, 40% Glass/Mineral Reinforced, Flame Retardant Polybutylene Terephthalate, 40% Glass/Mineral Reinforced, Flame RetardantProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test.. |
|||
| Melt Flow | 2.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 250 °C |
2.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 482 °F |
ASTM D1238 |
| Polymer Resources TP-IM1 Polybutylene Terephthalate, Low Temperature Impact Modified Polybutylene Terephthalate, Low Temperature Impact ModifiedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Infor.. |
|||
| Melt Flow | 4.0 - 8.0 g/10 min @Load 1.20 kg, Temperature 300 °C |
4.0 - 8.0 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
| Ravago Manufacturing Americas Hylex® P1310G20 HB Polycarbonate, 20% Fiberglass Reinforced, UV Stabilized Information provided by Ravago. |
|||
| Melt Flow | 5.0 - 8.0 g/10 min | 5.0 - 8.0 g/10 min | on the basis of basic grades 11503-070 and 16803-070 |
| Kazanorgsintez P2KP Polyethylene Pigment Masterbatches Production Method: P2KP polyethylene pigment masterbatches are produced on the basis of low density polyethylene with high content of masterbatches. Application: P2KP polyethylene pigment masterbatc.. |
|||
| Melt Flow | 6.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 190 °C |
6.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238-00 |
| Ipiranga Petrochem PCC 0710 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr.. |
|||
| Melt Flow | 6.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 190 °C |
6.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238-00 |
| Ipiranga Petrochem PCC 0742 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr.. |
|||
| Melt Flow | 5.0 - 8.0 g/10 min @Load 5.00 kg, Temperature 200 °C |
5.0 - 8.0 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
| Lavergne VYSTYRENE PS 3901 High Impact Polystyrene Vystyrene PS 3901 is a black impact modified polystyrene compound with balanced impact/stiffness properties designed for injection molding applicationsFeatures: -High resilience -Excellent process.. |
|||
| Melt Flow | 3.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
3.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Solvay Specialty Polymers Solef® 32008 Polyvinylidene Fluoride (PVDF) Solef® 32008 PVDF copolymer is a low viscosity and very flexible grade for Wire & Cable applications.Features: Copolymer; Good Flexibility; Low ViscosityUses: Wire & Cable ApplicationsAdditional .. |
|||
| Melt Flow | 4.0 - 8.0 g/10 min @Load 12.5 kg, Temperature 230 °C |
4.0 - 8.0 g/10 min @Load 27.6 lb, Temperature 446 °F |
ISO 1133 |
| Shanghai Ofluorine 9201F PVDF Powder for cables Description: Excellent mechanical properties, heat resistance and flame resistance, PVDF for cable can bear high temperature, corrosive chemicals etc harsh working environment, which has low smoke, .. |
|||
| Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | 230/3.8; May be specified; ASTM D1238 |
| Plastics Group Polifil® RP-ABS Acrylonitrile-Butadiene Styrene, Standard Version Polifil® RP- Acrylonitrile-Butadiene Styrene is a styrenic resin with improved toughness and heat resistance versus HIPS grades. ABS exhibits high gloss, low shrinkage, and good dimensional stabili.. |
|||
| Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | ASTM D1238 |
| A. Schulman POLYFLAM™ RCP 500 C DescriptionPolyflam® RCP 500C is an economical flame-retardant concentrate based in low-density polyethylene that features excellent dispersion and processing stability up to 550°F. ApplicationRC.. |
|||
| Melt Flow | 6.0 - 8.0 g/10 min @Temperature 230 °C |
6.0 - 8.0 g/10 min @Temperature 446 °F |
ASTM D1238 |
| A. Schulman POLYFORT™ 1602 UV-3120 UV Stabilized, Glass Reinforced Copolymer Polypropylene DescriptionPolyfort® FPP 1602 UV-3120 is a black UV stabilized 10% chemically coupled glass reinforced copolymer polypropylene.Information provided by A. Schulman. |
|||
| Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | ASTM D1238 |
| A. Schulman POLYFLAM™ RCP 505C Flame Retardant Concentrate Based In Low-Density Polyethylene Information provided by A. Schulman. |
|||
| Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | ASTM D1238 |
| A. Schulman POLYFLAM™ RCP 505C Flame Retardant Concentrate Based In Low-Density Polyethylene Information provided by A. Schulman. |
|||
| Melt Flow | 6.0 - 8.0 g/10 min @Temperature 230 °C |
6.0 - 8.0 g/10 min @Temperature 446 °F |
ASTM D1238 |
| A. Schulman POLYFORT™ 1602 UV-3120 UV Stabilized, Glass Reinforced Copolymer Polypropylene DescriptionPolyfort® FPP 1602 UV-3120 is a black UV stabilized 10% chemically coupled glass reinforced copolymer polypropylene.Information provided by A. Schulman. |
|||
| Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | ASTM D1238 |
| A. Schulman POLYFLAM™ RCP 505C Flame Retardant Concentrate Based In Low-Density Polyethylene Information provided by A. Schulman. |
|||
| Melt Flow | 6.0 - 8.0 g/10 min @Temperature 230 °C |
6.0 - 8.0 g/10 min @Temperature 446 °F |
ASTM D1238 |
| A. Schulman POLYFORT™ 1602 UV-3120 UV Stabilized, Glass Reinforced Copolymer Polypropylene DescriptionPolyfort® FPP 1602 UV-3120 is a black UV stabilized 10% chemically coupled glass reinforced copolymer polypropylene.Information provided by A. Schulman. |
|||
| Melt Flow | 6.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
6.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
|
| Breplast Bretene SPF M Thermoplastic Composite, 70% PP + 30% PE Recovered polypropylene and polyethylene compositeInformation provided by Breplast S.p.A. |
|||
| Melt Flow | 1.0 - 8.0 g/10 min | 1.0 - 8.0 g/10 min | ASTM D1238 |
| Buckeye Polymers BP RPPC 2008 C BLK Polypropylene, Calcium Filled Product Information: Calcium Carbonate Filled PP Grades have a high impact toughness, moderate increased stiffness, and excel in high gloss applications. Our BP RPP C series product line ranges fro.. |
|||
| Melt Flow | 3.0 - 8.0 g/10 min @Load 21.6 kg, Temperature 232 °C |
3.0 - 8.0 g/10 min @Load 47.6 lb, Temperature 450 °F |
ASTM D1238 |
| Arkema Group KYNAR® LBG1 Polyvinylidene Fluoride Powder Characteristics: White, non-hygroscopic powder.Applications: Membrane, Lithium ion battery applicationsInformation provided by Arkema Inc. |
|||
| Melt Flow | 4.0 - 8.0 g/10 min @Load 5.00 kg, Temperature 230 °C |
4.0 - 8.0 g/10 min @Load 11.0 lb, Temperature 446 °F |
ASTM D1238 |
| Solvay Specialty Polymers Solef® 11010 Polyvinylidene Fluoride (PVDF)
(Unverified Data**) Solef® 11010 PVDF is a medium-viscosity flexible PVDF copolymer resin and is typically processed by extrusion.Information provided by Solvay Specialty Polymers. |
|||
| Melt Flow | 3.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
3.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Solvay Specialty Polymers Solef® 31508 Polyvinylidene Fluoride (PVDF)
(Unverified Data**) Solef® 31508 PVDF copolymer is a low viscosity and very flexible grade for Wire & Cable applications.Information provided by Solvay Specialty Polymers. |
|||
| Melt Flow | 2.0 - 8.0 g/10 min | 2.0 - 8.0 g/10 min | ASTM D1238 |
| Polymer Resources PPX/NY G10 Modified PPO, 10% Glass Reinforced PPX/Nylon 6,6 Alloy
(Unverified Data**)&l Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation. |
|||
| Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | ASTM D1238 |
| Polymer Resources PPX-FR7 Modified PPO, V-0 Flame Retardant, Medium Heat, 250 HDT
(Unverified Data**) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation. |
|||
| Melt Flow | 3.0 - 8.0 g/10 min @Load 5.00 kg, Temperature 190 °C |
3.0 - 8.0 g/10 min @Load 11.0 lb, Temperature 374 °F |
ISO 1133 |
| Polyplastic Armoflen® PO MF 75-2 Linear Low Density Polyethylene, 75% Calcium Carbonate Information provided by PolyPlastic Group. |
|||
| Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | ASTM D1238 |
| Polymer Resources PPX-FR3 Modified PPO, UL 94 V-1 with HDT of 265 F
(Unverified Data**) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation. |
|||
Copyright © lookpolymers.com All Rights Reserved