| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Flame Retardant |
| Manufacturer | Plastcom spol. s r.o. |
| Trade Name | SLOVALEN |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Plastcom SLOVALEN EH 96 FRD 2 PP, flame retardant.pdf |
| Price | EMAIL US sales@lookpolymers.com |
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.01 g/cc | 0.0365 lb/in³ | |
| Linear Mold Shrinkage | 0.0238 cm/cm | 0.0238 in/in | |
| Linear Mold Shrinkage, Transverse | 0.0217 cm/cm | 0.0217 in/in | |
| Melt Flow | 15 g/10 min @Load 0.325 kg, Temperature 270 °C |
15 g/10 min @Load 0.716 lb, Temperature 518 °F |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 18.0 MPa | 2610 psi | |
| Elongation at Break | 33 % | 33 % | |
| Tensile Modulus | 1.20 GPa | 174 ksi | |
| Flexural Strength | 21.0 MPa | 3050 psi | |
| Flexural Modulus | 0.900 GPa | 131 ksi | |
| Charpy Impact Unnotched | 4.50 J/cm² @Temperature -20.0 °C |
21.4 ft-lb/in² @Temperature -4.00 °F |
|
| NB @Temperature 23.0 °C |
NB @Temperature 73.4 °F |
||
| Charpy Impact, Notched | 0.600 J/cm² @Temperature -20.0 °C |
2.86 ft-lb/in² @Temperature -4.00 °F |
|
| 1.00 J/cm² @Temperature 23.0 °C |
4.76 ft-lb/in² @Temperature 73.4 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 130 °C | 266 °F | |
| Deflection Temperature at 1.8 MPa (264 psi) | 55.0 °C | 131 °F | |
| Vicat Softening Point | 100 °C | 212 °F | B |
| Flammability, UL94 | V-2 | V-2 | |
| Glow Wire Test | 850 °C | 1560 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | |
| Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | |
| Dielectric Strength | 28.0 kV/mm | 711 kV/in | |
| Comparative Tracking Index | 500 V | 500 V |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 170 - 190 °C | 338 - 374 °F | |
| Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
| Injection Pressure | 50.0 - 80.0 MPa | 7250 - 11600 psi |