| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Charpy Impact, Notched |
1.00
J/cm² @Temperature 23.0 °C |
4.76
ft-lb/in² @Temperature 73.4 °F |
STN EN ISO 179 |
|
Plastcom SLOVALEN PC 78 FRD 1 Polypropylene Copolymer, Halogen Flame Retardant, UV Stabilized
FeaturesModified copolymer PP with the possibility of changing the MFI within the interval 5 - 20 g/10min. Stabilized against the UV-radiation by the UV stabilizer on the HALS basis. Retarded with..
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature 23.0 °C |
4.76
ft-lb/in² @Temperature 73.4 °F |
|
|
Radici Radilon® S RV200 (dry) Nylon 6
Radilon® S is a range of polyamide 6 (PA6) products obtained through the polymerization of caprolactam and used for injection, extrusion and blow-molding.Information provided by Radici group.
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature 23.0 °C |
4.76
ft-lb/in² @Temperature 73.4 °F |
V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA |
|
SABIC Innovative Plastics Lexan® ML7678 PC
17.5 MFR, for small, intricate parts. FDA food contact compliant in limited colors. Enhanced mold release package.This data was supplied by SABIC-IP for the Americas region.
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature 23.0 °C |
4.76
ft-lb/in² @Temperature 73.4 °F |
STN EN ISO 179 |
|
Plastcom SLOVALEN PQ 91 N Polypropylene Homopolymer, Modified with Elastomer, Impacted
FeaturesHomopolymer PP modified with elastomer. The addition of thermoplastic elastomer causes increased toughness, possible alternative to PP copolymers. General application in all industry branc..
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature 23.0 °C |
4.76
ft-lb/in² @Temperature 73.4 °F |
ISO 179 |
|
Polykemi AB POLYfill PP EIP16020 F PP Mineral Reinforced, Extrusion Grade, Low CLTE
Information provided by Polykemi AB
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature -30.0 °C |
4.76
ft-lb/in² @Temperature -22.0 °F |
V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA |
|
SABIC Innovative Plastics Lexan® EXRL0662 PC
Med/low flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO, steam e-beam and gamma sterilizable. ..
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature -30.0 °C |
4.76
ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eA |
|
DSM Akulon® S223-G8U (Dry) 43% Glass Reinforced Nylon 66 (North America)
(discontinued **)
Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.Unfilled Extrusion ResinsAkulon resins are available with melt vis..
|
|||
| Charpy Impact, Notched |
<=
1.00
J/cm² @Temperature -30.0 °C |
<=
4.76
ft-lb/in² @Temperature -22.0 °F |
Conditioned; ISO 179/1eA |
|
Lanxess Durethan® AC 30 000000 Nylon 66
PA 66, injection molding-grade, non-reinforced, higher notched impact strength than A 30 / A 31 in the dry and conditioned stateApplication Examples: plug connectors, cable binders, cable clips, par..
|
|||
| Charpy Impact, Notched |
<=
1.00
J/cm² @Temperature -30.0 °C |
<=
4.76
ft-lb/in² @Temperature -22.0 °F |
Conditioned; ISO 179/1eA |
|
Lanxess Durethan® AKV 30 H2.0 901510 Nylon 66, 30% Glass Fiber
PA 66, injection molding-grade, 30% glass fibers, good heat-ageing resistance
|
|||
| Charpy Impact, Notched |
<=
1.00
J/cm² @Temperature -30.0 °C |
<=
4.76
ft-lb/in² @Temperature -22.0 °F |
Conditioned; ISO 179/1eA |
|
Lanxess Durethan® BKV 15 G H2.0 900051 Copolyamide, 15% Glass Fiber
CoPA, injection molding grade, 15% glass fibers, better surface resistance to alcoholic calcium chloride-solution than BKV 15 H2.0, good heat-ageing resistance
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature -30.0 °C |
4.76
ft-lb/in² @Temperature -22.0 °F |
d.a.m.; ISO 179-1eA |
|
Lanxess Durethan® BKV 50 H EF DUS022 900116 Nylon 6, Glass Fiber Reinforced
PA 6, 50% glass fibers, injection molding, improved flowability, heat-aging stabilizedInformation provided by LANXESS.
|
|||
| Charpy Impact, Notched |
<=
1.00
J/cm² @Temperature 23.0 °C |
<=
4.76
ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
|
Lanxess Durethan® DP 2802/30 000000 Nylon 66, 30% Glass Fiber
PA 66 injection molding grade, 30% glass fibers, UL 94V-2 at 0.75 mm , GWFI:960°C at 0.75 mm, GWIT: 775°C at 0,75 mm, halogen-freeApplication Examples: mixer insert for blenders, washing machi..
|
|||
| Charpy Impact, Notched |
<=
1.00
J/cm² @Temperature 23.0 °C |
<=
4.76
ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
|
Lanxess Pocan® B 3225 000000 PBT, 20% Glass Fiber
PBT, 20% glass fibers, injection molding
|
|||
| Charpy Impact, Notched |
<=
1.00
J/cm² @Temperature 23.0 °C |
<=
4.76
ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
|
Lanxess Pocan® B 4225 000000 PBT, 20% Glass Fiber
PBT, 20% glass fibers, injection molding, flame retardant
|
|||
| Charpy Impact, Notched |
<=
1.00
J/cm² @Temperature 23.0 °C |
<=
4.76
ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
|
Lanxess Durethan® AKV 15 000000 Nylon 66, 15% Glass Fiber
PA 66, injection molding grade, 15% glass fibers
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature 23.0 °C |
4.76
ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
|
Lanxess Durethan® BKV 35 H2.0 EF 901510 Nylon 6, 35% Glass Fiber
PA 6, injection molding grade, 35% glass fibers, good heat-ageing resistance, good flowability (easy flow)
|
|||
| Charpy Impact, Notched |
<=
1.00
J/cm² @Temperature -30.0 °C |
<=
4.76
ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eA |
|
Lanxess Pocan® BF 4409 000000 PBT, 7% Glass Fiber
PBT, 7% glass fibers, injection molding, flame retardant
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature -30.0 °C |
4.76
ft-lb/in² @Temperature -22.0 °F |
ISO 179 |
|
Styrolution Novodur® 4000PG ABS
Novodur Ultra 4000PG is an injection molding grade especially suitable for electroplating, providing enhanced heat resistance.Information provided by Styrolution
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature -30.0 °C |
4.76
ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eA |
|
Sax Polymers SAXLAC 320A Acrylonitrile Butadiene Styrene
Saxalac 320A is an antistatic, high impact resistant and easy flowing ABS injection molding grade, characterized by good processability and high stiffness.Mechanical property data tested at 50% RH.I..
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature 23.0 °C |
4.76
ft-lb/in² @Temperature 73.4 °F |
ISO 179 |
|
Unipetrol PP MONSTEN® MT 805 Polypropylene Random Copolymer
Made for injection molding applications. Antistatic and transparent stabilization. Random copolymer.Information provided by Unipetrol RPA
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature 23.0 °C |
4.76
ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
|
DSM Akulon® S223-HM8 Nylon 66-40% Mineral Reinforced (European and Asian Grade) (Cond)
The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature -30.0 °C |
4.76
ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eA |
|
DSM Arnite® TV4 260 SN PBT-GF30 FR(17)
30% Glass Reinforced, Flame Retardant
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature 23.0 °C |
4.76
ft-lb/in² @Temperature 73.4 °F |
dry; ISO 179/1eA |
|
DSM Stanyl® TS300 PA46 |
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature -30.0 °C |
4.76
ft-lb/in² @Temperature -22.0 °F |
50%RH; ISO 179/1eA |
|
DuPont Performance Polymers Zytel® 70G30HSLR NC010 Nylon 66
(Unverified Data**)
Zytel® 70G30HSLR NC010 is a 30% glass fiber reinforced, heat stabilized, hydrolysis resistant polyamide 66 resin for injection molding.Information provided by DuPont Performance Polymers
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature -30.0 °C |
4.76
ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eA |
|
Ascend Performance Materials Vydyne® R533H BK10A0 Nylon 66, 33% Glass Reinforced, DAM
Vydyne® R533H BK10A0 is 33% glass-fiber reinforced, hydrolysis-resistant, heat-stabilized PA66 resin. Available in black, it is specifically designed to maximize the retention of physical propertie..
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature 23.0 °C |
4.76
ft-lb/in² @Temperature 73.4 °F |
|
|
LATI Latamid 66 H2 G/25-V0KB3 PA 66, 25% Glass Fiber Reinforced, Heat Stabilized, Flame Retardant
Polyamide 66 (PA66) based compound. Heat stabilized. Glass fibers. UL94 V-0 classified, with red phosphorous. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaIn..
|
|||
| Charpy Impact, Notched |
1.00
J/cm² @Temperature -20.0 °C |
4.76
ft-lb/in² @Temperature -4.00 °F |
|
|
LATI Later 4E61 PBT
Polybutylene Terephthalate (PBT). Toughened. Good impact resistance even at low temperature.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided..
|
|||
| Charpy Impact, Notched |
<=
1.00
J/cm² @Temperature -30.0 °C |
<=
4.76
ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eA |
|
Lanxess Pocan® S 7020 000000 PBT
PBT, non-reinforced, injection molding, extrusion, flame retardant, impact modified
|
|||