Overview of materials for Polypropylene with 30% Mica Filler

Category	Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene with 30% Mica Filler
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Overview of materials for Polypropylene with 30% Mica Filler.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 30% Mica Filler". Specific grades with primary filler content between 25% and 34% are included. Each property range of values reported is minimum and maximum values of appropriate MatWeb entries. The comments report the average value, and number of data points used to calculate the average. The values are not necessarily typical of any specific grade, especially less common values and those that can be most affected by additives or processing methods.

Physical Properties	Metric	English	Comments
Density	1.08 - 1.49 g/cc	0.0390 - 0.0538 lb/in³	Average value: 1.13 g/cc Grade Count:26
Filler Content	25.0 - 40.0 %	25.0 - 40.0 %	Average value: 27.3 % Grade Count:11
Water Absorption	0.0200 - 0.0300 %	0.0200 - 0.0300 %	Average value: 0.0267 % Grade Count:3
Linear Mold Shrinkage	0.00400 - 0.0130 cm/cm	0.00400 - 0.0130 in/in	Average value: 0.00840 cm/cm Grade Count:25
Melt Flow	4.00 - 20.0 g/10 min	4.00 - 20.0 g/10 min	Average value: 11.1 g/10 min Grade Count:16
Ash	30.0 %	30.0 %	Average value: 30.0 % Grade Count:9

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	30.0 - 98.0	30.0 - 98.0	Average value: 65.3 Grade Count:12
Hardness, Shore D	72.0 - 73.0	72.0 - 73.0	Average value: 72.4 Grade Count:5
Tensile Strength, Ultimate	14.0 - 33.8 MPa	2030 - 4900 psi	Average value: 26.2 MPa Grade Count:22
Tensile Strength, Yield	15.0 - 41.4 MPa	2180 - 6000 psi	Average value: 29.8 MPa Grade Count:13
Elongation at Break	2.50 - 15.0 %	2.50 - 15.0 %	Average value: 8.50 % Grade Count:19
Elongation at Yield	1.50 - 5.00 %	1.50 - 5.00 %	Average value: 3.19 % Grade Count:13
Modulus of Elasticity	2.00 - 6.21 GPa	290 - 900 ksi	Average value: 3.61 GPa Grade Count:14
Flexural Yield Strength	21.0 - 51.7 MPa	3050 - 7500 psi	Average value: 42.2 MPa Grade Count:17
Flexural Modulus	2.10 - 5.52 GPa	305 - 800 ksi	Average value: 3.31 GPa Grade Count:25
Izod Impact, Notched	0.214 - 1.49 J/cm	0.400 - 2.80 ft-lb/in	Average value: 0.523 J/cm Grade Count:25
Izod Impact, Unnotched	1.07 - 6.41 J/cm	2.00 - 12.0 ft-lb/in	Average value: 3.51 J/cm Grade Count:8
Gardner Impact	0.451 - 2.26 J	0.333 - 1.67 ft-lb	Average value: 1.13 J Grade Count:7

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	97.2 - 149 °C	207 - 300 °F	Average value: 122 °C Grade Count:21
Deflection Temperature at 1.8 MPa (264 psi)	55.0 - 130 °C	131 - 266 °F	Average value: 81.1 °C Grade Count:24
Flammability, UL94	HB - V-0	HB - V-0	Grade Count:8

Processing Properties	Metric	English	Comments
Nozzle Temperature	216 - 232 °C	420 - 450 °F	Average value: 222 °C Grade Count:5
Melt Temperature	191 - 243 °C	375 - 470 °F	Average value: 218 °C Grade Count:10
Mold Temperature	26.7 - 65.6 °C	80.0 - 150 °F	Average value: 43.4 °C Grade Count:10
Drying Temperature	65.6 - 90.0 °C	150 - 194 °F	Average value: 77.2 °C Grade Count:10
Moisture Content	0.0500 %	0.0500 %	Average value: 0.0500 % Grade Count:5
Injection Pressure	2.76 - 103 MPa	400 - 15000 psi	Average value: 41.9 MPa Grade Count:9

Users viewing this material also viewed the following: