EMS-Grivory Grivory® 2D 25 W 20 HL X black 9992 PA612-I

Category	Polymer , Thermoplastic , Nylon , Nylon 612
Manufacturer	EMS-Grivory (EMS-CHEMIE)
Trade Name	Grivory®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	EMS-Grivory Grivory® 2D 25 W 20 HL X black 9992 PA612-I.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Product Description: Grilamid 2D 25 W 20 HL X black 9992 is a semi-flexible high viscosity, plasticized, high impact and highly heat resistant polyamide 612 (PA612) grade. Unique properties of Grilamid 2D 25 W 20 HL X black 9992 are: High strength, high burst pressure (tube) High heat resistance Significantly lower water absorption compared to standard polyamides Good chemical and hydrolysis resistance Low density Easy processing Grilamid 2D 25 W 20 HL X black 9992 has been developed for media lines in passenger cars and trucks. Thanks to its excellent heat resistance it is particularly suitable for diesel, air brake, cooling, oil and hydraulic tubes. The product is not recommended for direct permanent contact with gasoline. One particular application is the use as outer layer of multilayer ECOSYS coolant tubes. ECOSYS (EMS Cooling System) is the designation for tube solutions developed by EMS-GRIVORY for automotive heating and cooling systems.Information provided by EMS Grivory

Physical Properties	Metric	English	Comments
Density	1.04 g/cc	0.0376 lb/in³	ISO 1183
Water Absorption	2.1 %	2.1 %	ISO 62
Moisture Absorption	0.900 %	0.900 %	ISO 62

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	30.0 MPa	4350 psi	conditioned; ISO 2039-1
	39.0 MPa	5660 psi	dry; ISO 2039-1
Tensile Stress	25.0 MPa @Strain 50.0 %	3630 psi @Strain 50.0 %	conditioned; ISO 527-1/-2
	30.0 MPa @Strain 50.0 %	4350 psi @Strain 50.0 %	dry; ISO 527-1/-2
Elongation at Break	>= 50 %	>= 50 %	dry; ISO 527-1/-2
	>= 50 %	>= 50 %	conditioned; ISO 527-1/-2
Tensile Modulus	0.380 GPa	55.1 ksi	conditioned; ISO 527-1/-2
	0.550 GPa	79.8 ksi	dry; ISO 527-1/-2
Charpy Impact Unnotched	NB	NB	dry; ISO 179/1eU
	NB	NB	conditioned; ISO 179/1eU
	NB @Temperature 30.0 °C	NB @Temperature 86.0 °F	dry; ISO 179/1eU
	NB @Temperature 30.0 °C	NB @Temperature 86.0 °F	conditioned; ISO 179/1eU
Charpy Impact, Notched	NB	NB	dry; ISO 179/1eA
	NB	NB	conditioned; ISO 179/1eA
	1.30 J/cm² @Temperature 30.0 °C	6.19 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU
	1.50 J/cm² @Temperature 30.0 °C	7.14 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	250 µm/m-°C	139 µin/in-°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	100 µm/m-°C	55.6 µin/in-°F	ISO 11359-1/-2
Melting Point	210 °C	410 °F	10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air	80.0 - 110 °C	176 - 230 °F	long term; EMS
	150 °C	302 °F	short term; EMS
Deflection Temperature at 0.46 MPa (66 psi)	100 °C	212 °F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	50.0 °C	122 °F	ISO 75-1/-2
Flammability, UL94	HB	HB	IEC 60695-11-10

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+9 ohm-cm	1.00e+9 ohm-cm	conditioned; IEC 60093
Surface Resistance	1.00e+10 ohm	1.00e+10 ohm	IEC 60093
Dielectric Strength	37.0 kV/mm	940 kV/in	conditioned; IEC 60243-1
Comparative Tracking Index	600 V	600 V	conditioned; IEC 60112

Descriptive Properties	Value	Comments
Additives	Plasticizer
Automotive	Air intake sytems
	Compressed air systems
	Cooling and climate control
	Fuel systems
	Hydraulic systems
	Powertrain and Chassis
Electricals & Electronics	Cables & Tubes
Form	Granules
Industry & Consumer goods	Hydraulics & Pneumatics
	Mechanical Engineering
Processing	Other Extrusion
	Profile Extrusion
Product Attributes	Flexible
	High viscosity
	Hydrolysis resistant
Special Characteristics	High impact or impact modified
	Improved heat resistance
	Light stabilized or stable to light

Users viewing this material also viewed the following: