- HOME
- POLYMER SEARCH
- Thermoplastic
- Polycarbonate (PC)
- Clariant Renol PCSP0008BK Polycarbonate, ESD Protection
Clariant Renol PCSP0008BK Polycarbonate, ESD Protection
| Category | Polymer , Thermoplastic , Polycarbonate (PC) |
| Manufacturer | Clariant |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Clariant Renol PCSP0008BK Polycarbonate, ESD Protection.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Data provided by Clariant Masterbatches
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.24 g/cc | 1.24 g/cc | ASTM D792 |
| Linear Mold Shrinkage, Flow | 0.0060 - 0.0080 cm/cm | 0.0060 - 0.0080 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 55.2 MPa | 8000 psi | ASTM D638 |
| Elongation at Break | >= 10 % | >= 10 % | ASTM D638 |
| Flexural Yield Strength | 89.6 MPa | 13000 psi | ASTM D790 |
| Flexural Modulus | 2.59 GPa | 375 ksi | ASTM D790 |
| Izod Impact, Notched | 1.60 J/cm @Temperature 22.8 °C |
3.00 ft-lb/in @Temperature 73.0 °F |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 132 °C | 270 °F | ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1000 - 1.00e+6 ohm-cm | 1000 - 1.00e+6 ohm-cm | ASTM D150 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 274 - 316 °C | 525 - 600 °F | |
| Mold Temperature | 82.2 - 121 °C | 180 - 250 °F | |
| Dry Time | 2 - 4 hour @Temperature 121 °C |
2 - 4 hour @Temperature 250 °F |
to ensure the moisture level is less than 0.02% |
| Injection Pressure | 41.4 - 82.7 MPa | 6000 - 12000 psi | Secondary |
| 68.9 - 138 MPa | 10000 - 20000 psi | Initial | |
| Back Pressure | 0.345 - 1.72 MPa | 50.0 - 250 psi | |
| Shot Size | 30 - 80 % | 30 - 80 % | |
| Screw Speed | 20 - 100 rpm | 20 - 100 rpm |
Users viewing this material also viewed the following:
- Overview of materials for Ethylene Vinyl Alcohol (EVOH)
- Momentive Performance Materials Addisilâ„¢ 470 E Healthcare Extrusion Grade Heat Cured Rubber
- Ineos H35Z-00 Polypropylene Homopolymer
- Minelco FireCarb TEG-345 Expandable Graphite
- Teknor Apex APEX® 90-A472R-90-NT Polyvinyl Chloride, Flexible
- Solvay RHODAFAC® BN-936/S Surfactant
- A. Schulman POLYBATCH™ Light Grey LL803366/4 Concentrate Based In LLDPE
- A. Schulman POLYFORT™ 1602 UV-3120 UV Stabilized, Glass Reinforced Copolymer Polypropylene
- Arlon 41580R030 0.030" Uncured, Unsupported Silicone Rubber on Release Carrier
- Loctite® 568 Thread Sealant
Copyright © lookpolymers.com All Rights Reserved