POLYMER SEARCH

BASF Ultramid® 8202 PA6 (Dry)

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced, Flame Retardant
Manufacturer	BASF
Trade Name	Ultramid®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultramid® 8202 PA6 (Dry).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Ultramid 8202 is a low viscosity, general purpose polyamide 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It is also available in heat stabilized (Ultramid 8202 HS) and/or pigmented versions. It combines good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Physical Properties	Metric	English	Comments
Density	0.932 g/cc	0.0337 lb/in³	Melt; ISO 1183
	1.13 g/cc	0.0408 lb/in³	ISO 1183
Water Absorption	1.6 %	1.6 %	24 hour; ISO Test
	9.5 %	9.5 %	ISO 62
Moisture Absorption at Equilibrium	2.7 %	2.7 %	23°C/50% R.H.; ISO 62
Relative Viscosity	2.6 cP	2.6 cP	ISO Test; 96 % SAV
Viscosity Measurement	48	48	Formic Acid
Linear Mold Shrinkage	0.012 cm/cm	0.012 in/in	ASTM Data; MD

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	119	119	ASTM Test
Tensile Strength at Break	75.0 MPa	10900 psi	0.2 in/min; ASTM Test
Tensile Strength, Yield	78.0 MPa	11300 psi	50mm/min; ISO 527
	79.0 MPa	11500 psi	2 in/min; ASTM Test
	25.0 MPa @Temperature 120 °C	3630 psi @Temperature 248 °F	ISO Data
	25.0 MPa @Temperature 120 °C	3630 psi @Temperature 248 °F	ASTM Test
	35.0 MPa @Temperature 80.0 °C	5080 psi @Temperature 176 °F	ASTM Test
	35.0 MPa @Temperature 80.0 °C	5080 psi @Temperature 176 °F	ISO Data
	126 MPa @Temperature -40.0 °C	18300 psi @Temperature -40.0 °F	ASTM Test
	126 MPa @Temperature -40.0 °C	18300 psi @Temperature -40.0 °F	ISO Data
Elongation at Break	25 %	25 %	50mm/min, Nominal strain; ISO 527
	55 %	55 %	2 in/min; ASTM Test
Elongation at Yield	4.0 %	4.0 %	50mm/min; ISO 527
	4.0 %	4.0 %	2 in/min; ASTM Test
	36 % @Temperature 120 °C	36 % @Temperature 248 °F	ISO Data
	36 % @Temperature 120 °C	36 % @Temperature 248 °F	ASTM Test
	42 % @Temperature 80.0 °C	42 % @Temperature 176 °F	ISO Data
	42 % @Temperature 80.0 °C	42 % @Temperature 176 °F	ASTM Test
Tensile Modulus	2.70 GPa	392 ksi	1mm/min; ISO 527
	0.360 GPa @Temperature 120 °C	52.2 ksi @Temperature 248 °F	ISO Data
	0.485 GPa @Temperature 80.0 °C	70.3 ksi @Temperature 176 °F	ISO Data
Flexural Strength	85.0 MPa	12300 psi	ISO Data
	108 MPa	15700 psi	ASTM Test
	17.0 MPa @Temperature 120 °C	2470 psi @Temperature 248 °F	ASTM Test
	20.0 MPa @Temperature 93.0 °C	2900 psi @Temperature 199 °F	ASTM Test
	30.0 MPa @Temperature 65.0 °C	4350 psi @Temperature 149 °F	ASTM Test
	170 MPa @Temperature -40.0 °C	24700 psi @Temperature -40.0 °F	ASTM Test
Flexural Modulus	2.40 GPa	348 ksi	ISO Data
	2.83 GPa	410 ksi	ASTM Test
	0.305 GPa @Temperature 120 °C	44.2 ksi @Temperature 248 °F	ASTM Test
	0.350 GPa @Temperature 93.0 °C	50.8 ksi @Temperature 199 °F	ASTM Test
	0.500 GPa @Temperature 65.0 °C	72.5 ksi @Temperature 149 °F	ASTM Test
Izod Impact, Notched	0.480 J/cm @Temperature -40.0 °C	0.899 ft-lb/in @Temperature -40.0 °F	ASTM Test
	0.580 J/cm @Thickness 3.17 mm	1.09 ft-lb/in @Thickness 0.125 in	ASTM Test
Charpy Impact Unnotched	NB	NB	ISO 179
	5.10 J/cm² @Temperature -30.0 °C	24.3 ft-lb/in² @Temperature -22.0 °F	ISO 179
Charpy Impact, Notched	0.350 J/cm²	1.67 ft-lb/in²	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear	83.0 µm/m-°C @Temperature -30.0 - 30.0 °C	46.1 µin/in-°F @Temperature -22.0 - 86.0 °F	ASTM Test
Specific Heat Capacity	3.728 J/g-°C	0.8910 BTU/lb-°F	Melt
Thermal Conductivity	0.264 W/m-K	1.83 BTU-in/hr-ft²-°F	Melt
Melting Point	220 °C	428 °F	10 K/min
	220 °C	428 °F	ASTM Test
Deflection Temperature at 0.46 MPa (66 psi)	150 °C	302 °F	ISO 75
	178 °C	352 °F	ASTM Test
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	ISO 75
	65.0 °C	149 °F	ASTM Test
Flammability, UL94	V-2 @Thickness 0.700 mm	V-2 @Thickness 0.0276 in
	V-2 @Thickness 3.00 mm	V-2 @Thickness 0.118 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	IEC 60093
Dielectric Constant	3.3 @Frequency 1.00e+6 Hz	3.3 @Frequency 1.00e+6 Hz	IEC 60250
	3.5 @Frequency 100 Hz	3.5 @Frequency 100 Hz	IEC 60250
	4.1 @Frequency 1.00e+6 Hz	4.1 @Frequency 1.00e+6 Hz	ASTM Data
	4.3 @Frequency 1e+9 Hz	4.3 @Frequency 1e+9 Hz	ASTM Data
Dielectric Strength	37.0 kV/mm	940 kV/in	IEC 60243-1
Dissipation Factor	0.010 @Frequency 1e+9 Hz	0.010 @Frequency 1e+9 Hz	ASTM Data
	0.010 @Frequency 1.00e+6 Hz	0.010 @Frequency 1.00e+6 Hz	ASTM Data
	0.010 @Frequency 100 Hz	0.010 @Frequency 100 Hz	IEC 60250
	0.020 @Frequency 1.00e+6 Hz	0.020 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	260 °C	500 °F	Injection molding
Mold Temperature	80.0 °C	176 °F	Injection molding

Descriptive Properties	Value	Comments
Color	Natural
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding
UL.UL-C	Yes

Users viewing this material also viewed the following: