- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, 20% Mineral Filled
- Polyram PlusTek PB350M4 Nylon 6, 20% Mineral Filled
Polyram PlusTek PB350M4 Nylon 6, 20% Mineral Filled
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 20% Mineral Filled |
| Manufacturer | Polyram |
| Trade Name | PlusTek |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram PlusTek PB350M4 Nylon 6, 20% Mineral Filled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
20% mineral filled polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.26 g/cc | 0.0455 lb/in³ | DIN 53479 |
| Water Absorption | 7.2 % | 7.2 % | DIN 53495 |
| Moisture Absorption at Equilibrium | 2.4 % | 2.4 % | 50%RH; DIN 53714 |
| Linear Mold Shrinkage | 0.0080 - 0.011 cm/cm | 0.0080 - 0.011 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 110 | 110 | ASTM-D785 |
| Tensile Strength, Yield | 85.0 MPa | 12300 psi | ASTM-D638 |
| Elongation at Break | 4.0 % | 4.0 % | ASTM-D638 |
| Flexural Strength | 130 MPa | 18900 psi | ASTM D790 |
| Flexural Modulus | 3.50 GPa | 508 ksi | ASTM-D790 |
| Izod Impact, Notched | 0.500 J/cm @Temperature 23.0 °C |
0.937 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 218 °C | 424 °F | |
| Maximum Service Temperature, Air | 70.0 °C | 158 °F | Continuous Use |
| 180 °C | 356 °F | Short peaks operation | |
| Deflection Temperature at 0.46 MPa (66 psi) | 200 °C | 392 °F | DIN 53461 |
| Deflection Temperature at 1.8 MPa (264 psi) | 140 °C | 284 °F | DIN 53461 |
| Flammability, UL94 | HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | DIN 53482 |
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | DIN 53482 |
| Dielectric Constant | 3.5 @Frequency 1e+6 Hz |
3.5 @Frequency 1e+6 Hz |
VDE 0303/4 |
| Dielectric Strength | 100 kV/mm | 2540 kV/in | VDE 0303/4 |
Users viewing this material also viewed the following:
- Plaskolite Mustang PETG Sheet
- PolyOne Dynalloy™ 8900-60 Thermoplastic Elastomer (TPE)
- PolyOne Geon™ Vinyl Flexible R5160A Polyvinyl Chloride, Flexible (PVC, Flexible)
- Kobe Steel KS40PDA Titanium alloy with low alloying elements, ASTM Gr. 11, Annealed
- Iran Petrochemical (PCC) I1 HA 7260 High Density Polyethylene
- SABIC Innovative Plastics LNP LUBRICOMP KL003E POM (Europe-Africa-Middle East)
- Seals Eastern 5243 Neoprene / Chloroprene
- CeramTec Ceramtape A Alumina for Constrained Sintering
- Polyram RamShine PAS701 ASA, UV Stabilized
- PolyOne Nymax™ GF 1800 33 BLACK 13 Nylon 612 with 33% Glass Fiber (discontinued **)
Copyright © lookpolymers.com All Rights Reserved