- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone Rubber
- Silicone, Molded, Glass Fiber Filled
- Arlon 51576W015 0.0155" (0.394 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Arlon 51576W015 0.0155" (0.394 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
| Category | Polymer , Thermoset , Silicone , Silicone Rubber , Silicone, Molded, Glass Fiber Filled |
| Manufacturer | Arlon |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Arlon 51576W015 0.0155" (0.394 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Design/Construction: Side 1: Cured Silicone RubberSubstrate: 7628 Style Fiberglass Side 2: Uncured Silicone Rubber Interleave: Polyethylene Appearance: White silicone gum on glass fabricThis data represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Information provided by Arlon, Silicone Technologies Division
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.24 g/cc | 0.0448 lb/in³ | Side 2, Silicone Property; Arlon SQA-TMS-024 |
| 1.35 g/cc | 0.0488 lb/in³ | Side 1, Silicone Property; Arlon SQA-TMS-024 | |
| Thickness | 50.8 microns | 2.00 mil | Side 1; Arlon SQA-TMS-003 |
| 76.2 microns | 3.00 mil | Interleave | |
| 140 microns | 5.50 mil | Side 2; Arlon SQA-TMS-003 | |
| 203 microns | 8.00 mil | Substrate; Arlon SQA-TMS-003 | |
| 394 microns | 15.5 mil | Overall; Arlon SQA-TMS-003 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 44 | 44 | Side 2, Silicone Property; ASTM D2240 |
| 52 | 52 | Side 1, Silicone Property; ASTM D2240 | |
| Tensile Strength | 6.14 MPa | 890 psi | Side 1, Silicone Property; ASTM D412 |
| 7.58 MPa | 1100 psi | Side 2, Silicone Property; ASTM D412 | |
| Elongation at Break | 550 % | 550 % | Side 1, Silicone Property; ASTM D412 |
| 650 % | 650 % | Side 2, Silicone Property; ASTM D412 | |
| Peel Strength | 1.88 kN/m | 10.7 pli | Bond Strength; ASTM D624 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 232 °C | 450 °F | |
| Minimum Service Temperature, Air | -56.7 °C | -70.0 °F | |
| UL RTI, Electrical | 220 °C | 428 °F | |
| UL RTI, Mechanical without Impact | 200 °C | 392 °F | |
| Flammability, UL94 | HB | HB | per card E54153 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 25.2 kV/mm | 640 kV/in | ASTM D149 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 120 min @Temperature 204 °C |
2.00 hour @Temperature 400 °F |
Recommended Postcure Cycle |
| 15.0 min @Pressure 0.345 MPa, Temperature 177 °C |
0.250 hour @Pressure 50.0 psi, Temperature 350 °F |
Recommended Cure Cycle | |
| Shelf Life | 6.00 Month @Temperature 23.9 °C |
6.00 Month @Temperature 75.0 °F |
From date of manufacture |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | White | |
| Total Product Weight (oz/yd2) | 18.3 | Arlon SQA-TMS-025 |
Users viewing this material also viewed the following:
- RheTech Products GC20P255-00 20% Glass Fiber Reinforced Polypropylene Copolymer, Chemically Coupled, Natural
- Solvay Specialty Polymers KetaSpire® KT-820 GF30 Polyetheretherketone (PEEK) (Unverified Data**)
- Nilit FRIANYL B63 D-S 5 Nylon 6., std. viscosity for injection molding
- Technetics Group PLASTOLON™ PTFE Oral Care Fiber (Unverified Data**)
- Gwent Electronic Materials C2070126D4 High Brightness Phosphor Ink (Orange)
- Schwartz Technical Plastics LAMIGAMID® 309 Cast Polyamide 6, Oil Filled, Dry
- Polyplastics Duracon® TD-35 Acetal Co-polymer (POM), High impact, Flexible
- Arlon R31901R011 0.011" (0.279 mm) Uncured Silicone Rubber with Fiberglass Substrate
- BASF Polystyrol® 168 NO Polystyrene (Europe)
Copyright © lookpolymers.com All Rights Reserved