Polymer Property : Thickness = 50.8 microns Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Thickness	50.8 microns	2.00 mil	PSA Thickness
Parker Chomerics T-Wing™ Heat Spreader Chomerics family of thin heat spreaders provides a low-cost, effective means of cooling IC devices in restricted spaces where conventional heat sinks are not appropriate. T-Wing spreaders consist of..
Thickness	50.8 microns	2.00 mil	One liner
Dielectric Polymers TRANS-SIL® NT-1001 Silicone Transfer Adhesive (discontinued **) Crosslinked silicone adhesive with 2 polyester film release liners.Features: Resistant to extreme temperaturesHigh bond strengthChemical resistantApplications: High performance bonding and other app..
Thickness	50.8 microns	2.00 mil	Backing
Dielectric Polymers NT-5000 Protective Film (discontinued **) Acrylic adhesive with polyester film backing.Features: Clean removal even after exposure to high and low temperaturesSolvent resistantMoisture resistantFor use on matte metals and textured plasticsA..
Thickness	50.8 microns	2.00 mil	Unprimed Coated 1080 Fiberglass (same as 108/no plied yarns), Substrate
Arlon 48571R005 0.0055" (0.140 mm) Uncured Silicone Rubber with Fiberglass Substrate (discontinued **)&l Design/Construction:Side 1: Uncured RubberSide 2: Uncured RubberThis data represents typical values for the production material. The data should not be used to write, or in place of, material specif..
Thickness	50.8 microns	2.00 mil
Dow 662I Low Density Polyethylene Resin Blown Film Resin designed for enhanced bubble stability High melt strength Optimum gauge range: 1.5 - 5.0 mil Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1 Information provided by Dow
Thickness	50.8 microns	2.00 mil	Carrier
3M 9456 Double Coated Tapes with Adhesive 340 3M™ Double Coated Tapes with 3M™ Adhesive 340 provide a combination of high initial adhesion and good shear holding power to a wide variety of materials, including many plastics and foams. These t..
Thickness	50.8 microns	2.00 mil	Side 1; Arlon SQA-TMS-003
Arlon 680-R3844R 0.084" (2.13 mm) Cured Silicone Coating with Silica-based Substrate Design/Construction:Side 1: Cured Silicone Coating Substrate: Silica-basedSide 2: Cured Silicone Coating Rubber Application Advantages:Extremely low thermal conductivityThermally stableBondable to s..
Thickness	50.8 microns	2.00 mil	Liner
3M FM01G Indoor UL Recognized Clear Polyester Overlaminate Label Product 3M™ Indoor UL Recognized Clear Polyester Overlaminate Label Products are durable, high performance materials that offer excellent thermal stability and moisture resistance. These polyester overlami..
Thickness	50.8 microns	2.00 mil	Facestock
3M FM090 Indoor UL Recognized Matte Silver Polyester Label Product 3M™ Indoor UL Recognized Matte Silver Polyester Label Products are durable, high performance materials that offer excellent thermal stability and moisture resistance. These polyester labels utilize..
Thickness	50.8 microns	2.00 mil	Facestock
3M FM092R Indoor UL Recognized Matte Silver Polyester Label Product 3M™ Indoor UL Recognized Matte Silver Polyester Label Products are durable, high performance materials that offer excellent thermal stability and moisture resistance. These polyester labels utilize..
Thickness	50.8 microns	2.00 mil	Facestock
3M FM118B Indoor UL Recognized MC Polyester Label Products 3M™ Indoor UL Recognized MC Polyester Label Products are white durable, high performance micro-cavitated polyester materials that offer excellent thermal stability and moisture resistance. These po..
Thickness	50.8 microns	2.00 mil	Facestock
3M OFM03402 Outdoor UL Recognized White Polyester Label Product 3M™ Outdoor UL Recognized White Polyester Label Products are durable, high performance materials that offer excellent thermal stability and moisture resistance. These polyester labels utilize 3M™ ..
Thickness	50.8 microns	2.00 mil	without adhesive
3M Scotchcal™ 1000-57 Graphic Film 2-mil vinyl film; Wide color selection; Includes three colors with both a layflat liner and gray adhesive for excellent hiding power and a transparent film with a layflat liner; Pressure-sensitive a..
Thickness	50.8 microns	2.00 mil	without adhesive
3M Scotchcal™ 8000-10 Graphic Film This 2-mil, screen printable film with a pressure sensitive adhesive that can be used on flat and simple curved surfaces. This film withstands severe weather dn handling conditions encountered by co..
Thickness	50.8 microns	2.00 mil	without adhesive
3M Scotchcal™ 8000-23 Graphic Film This 2-mil, screen printable film with a pressure sensitive adhesive that can be used on flat and simple curved surfaces. This film withstands severe weather dn handling conditions encountered by co..
Thickness	50.8 microns	2.00 mil	without adhesive
3M Scotchcal™ ElectroCut™ 7125-263 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; The blue paper liner on 7125-10 and 7125-20 provides easier visibility when weeding, other film color..
Thickness	50.8 microns	2.00 mil	without adhesive
3M Scotchcal™ ElectroCut™ 7125-37 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; The blue paper liner on 7125-10 and 7125-20 provides easier visibility when weeding, other film color..
Thickness	50.8 microns	2.00 mil	without adhesive
3M Scotchcal™ ElectroCut™ 7125-59 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; The blue paper liner on 7125-10 and 7125-20 provides easier visibility when weeding, other film color..
Thickness	50.8 microns	2.00 mil	without adhesive
3M Scotchcal™ ElectroCut™ 7125-89 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; The blue paper liner on 7125-10 and 7125-20 provides easier visibility when weeding, other film color..
Thickness	50.8 microns	2.00 mil	without adhesive
3M Scotchcal™ RG3650-114 Graphic Film 2-mil, opaque white and transparent film; Pressure-sensitive adhesive; Permanent filmInformation provided by 3M
Thickness	50.8 microns	2.00 mil	Liner
3M 510 Sandblast Stencil 3M™ Sandblast Stencil 510, also known as letter perfect, can be used for hand-cut and die-cut applications as a surface protection during blasting procedures.Information provided by 3M
Thickness	50.8 microns	2.00 mil	Outer Liner
3M 519YP2 Sandblast Stencil 3M™ Sandblast Stencil Product 519YP2 consist of a tan rubber backing; and feature a double liner design for optimum support of center of letters, numbers and designs patterns. The double liner inc..
Thickness	50.8 microns	2.00 mil	Liner
3M 520S Sandblast Stencil 3M™ Sandblast Stencil 520 Series, also known as computer cut, is a tan rubber sandblast stencil featuring three differing liner designs. Computer cuttable 3M sandblast stencil 520S is a slot feed f..
Thickness	50.8 microns	2.00 mil	Side 1; Arlon SQA-TMS-003
Arlon 48B12R005 0.005" (0.127 mm) Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: PolyethyleneSide 1: Cured Silicone RubberSubstrate: Style 1080 FiberglassThis data represents typical values for the production material. The data should not be used..
Thickness	50.8 microns	2.00 mil	Total; ASTM D3752
3M 856 General Purpose Polyester Tape 3M™ General Purpose Polyester Tape 856 is a transparent polyester film tape for edging and reinforcing applications.Information provided by 3M
Thickness	50.8 microns	2.00 mil	K2030 PEN Film, Substrate
Arlon R33670N004 0.004" (0.102 mm) Uncured Silicone Rubber with K2030 PEN Film Substrate Design/Construction:Side 1: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Inf..
Thickness	>= 50.8 microns	>= 2.00 mil	Side 1, Fully Cured
Arlon R33889R020 0.020" (0.508 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Layer-on-Layer This data Represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Information ..
Thickness	50.8 microns	2.00 mil	without adhesive
3M Scotchcal™ ElectroCut™ 7125-54 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; The blue paper liner on 7125-10 and 7125-20 provides easier visibility when weeding, other film color..
Thickness	50.8 microns	2.00 mil	without adhesive
3M Scotchcal™ ElectroCut™ 7725-46 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; Transparent synthetic liner resists moisture absorption and static build up; Lays flat for easier ass..
Thickness	50.8 microns	2.00 mil	Substrate; Arlon SQA-TMS-003
Arlon R37582R0055 0.0055" Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Interleave: 1.5 mil PolyethyleneSide 1: Cured Silicone RubberSubstrate: Style 2113 FiberglassThis data represents typical values for the production material and should not be ..