- HOME
- POLYMER SEARCH
- Polymer Property : Thickness = 76.2 microns
Polymer Property : Thickness = 76.2 microns Product List
Physical PropertiesTips: 30 items are displayed at most.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Thickness | 76.2 microns | 3.00 mil | |
|
Hexcel® HexForce™ 2313 Fiber Glass Fabric
Fiber glass in fabric form offers an excellent combination of properties from high strength to fire resistance. Wide ranges of yarn sizes and weave patterns provide huge number of design potential ..
|
|||
| Thickness | 76.2 microns | 3.00 mil | |
|
Chevron Phillips MarFlex® 5628 LDPE Blown Film Resin
Resin Type: HomopolymerCharacteristics: Superior tensile and impact strengthGood abrasion and tear resistanceExcellent retention of properties after agingApplications: LaminationsPallet shrinkcase s..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Nominal |
|
DuPont™ Nomex® 410 Paper, 3 mil Nominal Thickness
Nomex® Type 410 is a calendared insulation paper which offers high inherent dielectric strength, mechanical toughness, flexibility, and resilience. It is the original form of Nomex® paper and is ..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Polyethylene Interleave |
|
Arlon 10842S018 0.018" (0.457 mm) Fully Cured, Unsupported, Silicone Rubber
Design/Construction:Side 1: Fully Cured, Unsupported, Silicone Rubber Appearance: Dark red silicone rubberThis data represents typical values for the production material. The data should not be used..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Interleave |
|
Arlon 51586R015E 0.015" (0.381 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Side 1: Cured Silicone RubberSubstrate: Style 7628 Fiberglass Side 2: Uncured Silicone Rubber Interleave: Polyethylene This data represents typical values for the production mat..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Mylar, Interleave |
|
Arlon 55579R033 0.033" (0.838 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured layer on top of a cured layer on one side Appearance: Red silicone gum and rubber on fiberglass clothThis data Represents typical values for the production materi..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Interleave |
|
Arlon 55759R028 0.029" (0.737 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Interleave: PolyethyleneLayer 2: Uncured Silicone Rubber Layer 1: Cured Silicone Rubber Substrate: 162 Style Fiberglass This data represents typical values for the production ma..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Polyethylene Carrier, Interleave |
|
Arlon 912-10R12-P1 0.012" (0.305 mm) Self-Fusing Silicone Tape
Design/Construction:Cross Section Type: RectangularRoll Length: 12 Yards Width, inches: 1Arlon Rectangular Tape: Rectangular tape is of uniform thickness and is ideal for applications where a smooth..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Polyethylene Carrier, Interleave |
|
Arlon 920-05Rxx-P1 0.020" (0.508 mm) Self-Fusing Silicone Tape
Design/Construction:Cross Section Type: RectangularWidth, inches: 0.5Arlon Rectangular Tape: Rectangular tape is of uniform thickness and is ideal for applications where a smooth, even layer of tape..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Polyethylene Carrier, Interleave |
|
Arlon 920-20Bxx-P1 0.020" (0.508 mm) Self-Fusing Silicone Tape
Design/Construction:Cross Section Type: RectangularWidth, inches: 2Arlon Rectangular Tape: Rectangular tape is of uniform thickness and is ideal for applications where a smooth, even layer of tape i..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Polyethylene, Interleave |
|
Arlon 940-15R##-P0 0.040" (1.02 mm) Cured Self-fusing Silicone Tape
Design/Construction: Interleave: Polyethylene Rubber: Cured Self-fusing Silicone Rubber Cross Section Type: 1.5” Wide Rectangular 1.5 inch wide, 40 mil thick, Red, Rectangular cross-section, Self-f..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Carrier; Arlon SQA-TMS-003 |
|
Arlon 99570R010 0.010" Uncured Silicone Rubber with PTFE Coated Fiberglass Carrier
Design/Construction:Liner: 0.001" FEP FilmSide 1: Uncured Silicone RubberCarrier: 0.003" PTFE coated FiberglassThis data represents typical values for the production material and should not be us..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Polyethylene, Interleave |
|
Arlon R32021R014 0.014" (0.356 mm) Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured Silicone Rubber Side 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Polyethylene, Interleave Side 1 |
|
Arlon R34661R015 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured Silicone Rubber Side 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Facestock |
|
3M FL02N Indoor UL Recognized Lexan Label Products
3M™ Indoor UL Recognized Lexan Label Products are durable, matte clear polycarbonate overlaminates that offer excellent moisture and abrasion resistance. These lexan labels utilize 3M™ Adhesive P1..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Substrate; Arlon SQA-TMS-003 |
|
Arlon Thermabond® 48A51X015 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate
Description: Primerless Thermabond® Electrically insulating, thermally conductive, electronic adhesive. Bonds without primer.Design/Construction: Liner 1: Polyethylene Side 1: Uncured Silicone Rubb..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Facestock |
|
3M FM299 Indoor UL Recognized Clear Polyester Overlaminate Label Products
3M™ Indoor UL Recognized Clear Polyester Overlaminate Label Products are durable, high performance materials that offer excellent thermal stability and moisture resistance. These polyester overlami..
|
|||
| Thickness | 76.2 - 102 microns | 3.00 - 4.00 mil | with adhesive |
|
3M Scotchcal™ 8000-23 Graphic Film
This 2-mil, screen printable film with a pressure sensitive adhesive that can be used on flat and simple curved surfaces. This film withstands severe weather dn handling conditions encountered by co..
|
|||
| Thickness | 76.2 - 102 microns | 3.00 - 4.00 mil | with adhesive |
|
3M Scotchcal™ 8000LF-12 Graphic Film
This 2-mil, screen printable film with a pressure sensitive adhesive that can be used on flat and simple curved surfaces. This film withstands severe weather dn handling conditions encountered by co..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Interleave |
|
Arlon 32960X078 0.078" (1.98 mm) Uncured Silicone Rubber on Polyester Film Carrier
Design/Construction: Interleave: PolyethyleneSide 1: Uncured Silicone RubberCarrier: Polyester FilmProduct Use: Flame Resistant Silicone PuttyAppearance: Gray colored, high viscosity gum on polymer ..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Polyethylene Interleave |
|
Arlon 44566R020 0.020" (0.508 mm) Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured Silicone Rubber Appearance: Red silicone gum on fiberglass fabricThis data represents typical values for the production material. The data should not be used to w..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Interleave |
|
Arlon 55276B028 0.0295" (0.749 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Interleave: Polyethylene Side 2: Uncured Silicone Rubber Substrate: Style 162 FiberglassSide 1: Cured Silicone Rubber This data represents typical values for the production mate..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Polyethylene, Interleave |
|
Arlon 912-10X##-P0 0.012" (0.305 mm) Cured Self-fusing Silicone Tape
Design/Construction: Interleave: Polyethylene Rubber: Cured Self-fusing Silicone Rubber Cross Section Type: 1” Wide Rectangular 1 inch wide, 12 mil thick, Gray, Rectangular cross-section, Self-fus..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Carrier; Arlon SQA-TMS-003 |
|
Arlon 99202R008 0.008" (0.203 mm) Cured Silicone Rubber with PTFE Coated Fiberglass Carrier
Design/Construction: Interleave: FEP FilmSide 1: Cured Silicone Rubber Carrier: PTFE Coated FiberglassProduct Use: Adhesive. Bonds without primer.Appearance: Off-white, High viscosity gum on release..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Release Liner |
|
3M 9497 Splicing Tape
3M™ Splicing Tapes utilize an acrylic pressure sensitive adhesive system that offers a balance of initial adhesion and good holding power.Information provided by 3M
|
|||
| Thickness | 76.2 - 127 microns | 3.00 - 5.00 mil | Overall |
|
Arlon R33670N004 0.004" (0.102 mm) Uncured Silicone Rubber with K2030 PEN Film Substrate
Design/Construction:Side 1: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Inf..
|
|||
| Thickness | 76.2 - 102 microns | 3.00 - 4.00 mil | with adhesive |
|
3M Scotchcal™ 1000-38 Graphic Film
2-mil vinyl film; Wide color selection; Includes three colors with both a layflat liner and gray adhesive for excellent hiding power and a transparent film with a layflat liner; Pressure-sensitive a..
|
|||
| Thickness | 76.2 - 102 microns | 3.00 - 4.00 mil | with adhesive |
|
3M Scotchcal™ 8000-37 Graphic Film
This 2-mil, screen printable film with a pressure sensitive adhesive that can be used on flat and simple curved surfaces. This film withstands severe weather dn handling conditions encountered by co..
|
|||
| Thickness | 76.2 microns | 3.00 mil | Total; ASTM D3652 |
|
3M 3513 Copper Foil Tape
EMI/RFI shielding. UL 510 Recognized.Information provided by 3M
|
|||
Copyright © lookpolymers.com All Rights Reserved