- HOME
- POLYMER SEARCH
- Polymer Property : Shelf Life = 6.00 Month
Polymer Property : Shelf Life = 6.00 Month Product List
Processing PropertiesTips: 30 items are displayed at most.
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Shelf Life |
6.00
Month @Temperature <=15.0 °C |
6.00
Month @Temperature <=59.0 °F |
|
|
Raschig Group EPOXIDUR® 3581 S ZC EP Epoxy Molding Compound
Inorganically filled epoxy molding compound. Good mechanical strength, very good electrical isolation properties and dimensional stability even at high temperatures. Very good sealing connection on ..
|
|||
| Shelf Life |
6.00
Month @Temperature 15.0 - 25.0 °C |
6.00
Month @Temperature 59.0 - 77.0 °F |
|
|
Raschig Group RALUPOL® 2100 UP Polyester
Organically and inorganically filled polyester molding compound. Low post-shrinkage, very good electrical values, good mechanical strength. This product meets the allowed upper limits for heavy meta..
|
|||
| Shelf Life |
6.00
Month @Temperature 25.0 °C |
6.00
Month @Temperature 77.0 °F |
|
|
Lord Adhesives 8631 Polymer Resistor Composition
LORD 8600 series polymer resistor compositions are designed for screen print application onto a wide range of substrates.All information provided by Lord.
|
|||
| Shelf Life | 6.00 Month | 6.00 Month | |
|
Gwent Electronic Materials D2070412D3 Polymer Dielectric
Green colored screen printable polymer dielectric, suitable for defining electrode areas and forms a protective layer over the electrode tracking during immersion of the electrode. The formulation ..
|
|||
| Shelf Life |
6.00
Month @Temperature 5.00 - 30.0 °C |
6.00
Month @Temperature 41.0 - 86.0 °F |
in unopened original container |
|
Heraeus Cleviosâ„¢ P Jet N V2 Conductive Sulfonate Polymer for Antistatic Coatings
Poly(3,4-ethylenedioxythiophene)poly(styrenesulfonate), provided as an aqueous dispersion used to produce thin film antistatic coatings. Cleviosâ„¢ P Jet N V2 is an antistatic material based on ..
|
|||
| Shelf Life | 6.00 Month | 6.00 Month | in original unopened containers |
|
Master Bond EP62-1Med USP Class VI Two Component Epoxy Resin System
Master Bond EP62-1Med is a two component epoxy system that has an exceptionally long working life at ambient temperatures and cures rapidly at moderately elevated temperatures. It has a 100 to 10 mi..
|
|||
| Shelf Life | 6.00 Month | 6.00 Month | |
|
Dow Corning SE 4440 LP KIT
Two-part, grey, 1:1, addition cure gel, good thermal conductivity, low viscosity.Information provided by Dow Corning
|
|||
| Shelf Life | 6.00 Month | 6.00 Month | |
|
Dow Corning SE 4448 CV KIT PARTS A&B
Excellent thermal conductivity, low volatility (D4-D10 0.03% wt), heat cure, high viscosity.Information provided by Dow Corning
|
|||
| Shelf Life |
6.00
Month @Temperature 21.1 °C |
6.00
Month @Temperature 70.0 °F |
From date of manufacture |
|
Arlon 19562R025 0.025" (0.635 mm) Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured Silicone Rubber Appearance: Red silicone gum on fiberglass clothThis data represents typical values for the production material. The data should not be used to wr..
|
|||
| Shelf Life |
6.00
Month @Temperature 23.9 °C |
6.00
Month @Temperature 75.0 °F |
|
|
Arlon 49581R010 0.0105" Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Interleave: 3 mil PolyethyleneSide 1: Uncured Silicone RubberSubstrate: Prime Coated 1681 FiberglassSide 2: Uncured Silicone RubberThis data represents typical values for the ..
|
|||
| Shelf Life |
6.00
Month @Temperature 23.9 °C |
6.00
Month @Temperature 75.0 °F |
From date of manufacture |
|
Arlon 51586R015 0.015" (0.381 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Side 1: Cured Silicone RubberSubstrate: 7628 Style Fiberglass Side 2: Uncured Silicone Rubber Interleave: Polyethylene Appearance: Red silicone gum and rubber on fiberglass clot..
|
|||
| Shelf Life |
6.00
Month @Temperature 23.9 °C |
6.00
Month @Temperature 75.0 °F |
From date of manufacture |
|
Arlon 51601W015 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured Silicone RubberSide 2: Uncured Silicone RubberProduct Use: Flexible heater insulationAppearance: White silicone gum on fiberglass with polymer release linersThis ..
|
|||
| Shelf Life |
6.00
Month @Temperature 4.44 - 10.0 °C |
6.00
Month @Temperature 40.0 - 50.0 °F |
From date of manufacture |
|
Arlon Thermabond® 99730N015 0.015" (0.381 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass Carrier
Description: Electrically Conductive - Thermabond®. Bonds with primer.Design/Construction: Liner: FEP Product: Uncured Silicone Rubber Carrier: PTFE Coated FiberglassRecommended Primers: Dow Coring..
|
|||
| Shelf Life |
6.00
Month @Temperature 4.44 - 32.2 °C |
6.00
Month @Temperature 40.0 - 90.0 °F |
|
|
Aremco Ceramabond™ 600-N High Temperature Ceramic Adhesive/Paste, Alumino-Silica Filled
Aremco Ceramabond™ 600-N High Temperature Ceramic Adhesive/Paste, Alumino-Silica Filled
|
|||
| Shelf Life | 6.00 Month | 6.00 Month | |
|
Aremco Corr-Paint™ CP4010-S1 High Temperature Protective Coating, Silicone |
|||
| Shelf Life | 6.00 Month | 6.00 Month | |
|
Aremco Corr-Paint™ CP4020-S High Temperature Protective Coating Silicone-Polyester |
|||
| Shelf Life | 6.00 Month | 6.00 Month | |
|
Aremco Corr-Paint™ CP4080 High Temperature Protective Coating Silicone, Aluminum Filled
This silicone-based, heat resistant coatings are formulated using a state-of-the-art, VOC-compliant, water-dispersible silicone resin. CP4000 adheres to metals, ceramics, refractories, and quartz, a..
|
|||
| Shelf Life |
6.00
Month @Temperature 23.9 °C |
6.00
Month @Temperature 75.0 °F |
From date of manufacture |
|
Arlon 30580R025 0.025" (0.635 mm) Uncured Unsupported Silicone Rubber on Release Carrier
Design/Construction:Side 1: Uncured Unsupported Silicone Rubber on Release CarrierAppearance: Red silicone gum on polymer linerThis data represents typical values for the production material. The da..
|
|||
| Shelf Life |
6.00
Month @Temperature 23.9 °C |
6.00
Month @Temperature 75.0 °F |
From date of manufacture |
|
Arlon 32580R060 0.060" (1.52 mm) Uncured Silicone Rubber on PET Carrier
Design/Construction: Interleave: PolyethyleneSide 1: Uncured Silicone RubberCarrier: PETAppearance: Red silicone gum on polymer linerThis data represents typical values for the production material. ..
|
|||
| Shelf Life |
6.00
Month @Temperature 21.1 °C |
6.00
Month @Temperature 70.0 °F |
|
|
Arlon 54331R014 0.014" Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Interleave 1: Blue LDPESide 1: Uncured Silicone RubberSubstrate: Style 2116 FiberglassSide 2: Uncured Silicone RubberInterleave 2: Blue LDPEThis data represents typical valu..
|
|||
| Shelf Life |
6.00
Month @Temperature 21.1 °C |
6.00
Month @Temperature 70.0 °F |
From date of manufacture |
|
Arlon 55279R033 0.033" (0.838 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Interleave: Polyethylene Layer 2: Uncured Silicone Rubber Layer 1: Cured Silicone Rubber Substrate: Style 162 Fiberglass Product Use: Flexible heater insulationAppearance: Red s..
|
|||
| Shelf Life |
6.00
Month @Temperature 23.9 °C |
6.00
Month @Temperature 75.0 °F |
From date of manufacture |
|
Arlon R33826R017 0.017" (0.432mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Cured Silicone Rubber Side 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place o..
|
|||
| Shelf Life |
6.00
Month @Temperature 21.1 °C |
6.00
Month @Temperature 70.0 °F |
From date of manufacture |
|
Arlon R35366X020 0.020" (0.508 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction:Interleave: Polyethylene Side 2: Uncured Silicone RubberSubstrate: Style 7628 Fiberglass Side 1: Cured Silicone Rubber Appearance: Gray gum on glass fiber fabricThis data represe..
|
|||
| Shelf Life | 6.00 Month | 6.00 Month | |
|
Aremco Corr-Paint™ CP4040-S1 High Temperature Protective Coating, Silicone |
|||
| Shelf Life | 6.00 Month | 6.00 Month | |
|
Aremco Corr-Paint™ CP4090-S High Temperature Protective Coating, Silicone-Polyester |
|||
| Shelf Life |
>=
6.00
Month @Temperature 4.44 °C |
>=
6.00
Month @Temperature 40.0 °F |
|
|
Vyncolit INSUL-PLATE™ X-28057-2HT Hole-Fill Powder For Printed Circuit Boards
Vyncolit INSUL-PLATE™ Hole-Fill material delivers true reliability and superior performance. This material, in powder form, is specifically suited for Hole-Fill use in glass epoxy, multi-layer and ..
|
|||
| Shelf Life |
6.00
Month @Temperature 23.9 °C |
6.00
Month @Temperature 75.0 °F |
|
|
Arlon 41580R025 0.025" Uncured, Unsupported Silicone Rubber on Release Carrier
Design/Construction:Interleave: 0.003" PolyethyleneSide 1: Uncured, Unsupported Silicone RubberSubstrate: Holland Cloth CarrierThis data represents typical values for the production material and ..
|
|||
| Shelf Life |
6.00
Month @Temperature 23.9 °C |
6.00
Month @Temperature 75.0 °F |
From date of manufacture |
|
Arlon 44141R020 0.020" (0.508 mm) Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction: Interleave 1: Clear PolyethyleneSide 1: Uncured Silicone RubberSubstrate: Style 1165 Fiberglass Side 2: Uncured Silicone RubberInterleave 2: Blue PolyethyleneThis data represent..
|
|||
Copyright © lookpolymers.com All Rights Reserved