Processing Properties | Metric | English | Comments |
---|---|---|---|
Pot Life | 45.0 - 45.0 min @Temperature 95.0 - 95.0 °C |
45.0 - 45.0 min @Temperature 203 - 203 °F |
Average value: 45.0 min Grade Count:1 |
Overview of materials for Methacrylate Adhesive This property data is a summary of similar materials in the MatWeb database for the category "Methacrylate Adhesive". Each property range of values reported is minimum and maximum values of appropri.. |
|||
Pot Life | 45.0 min @Temperature 23.9 °C |
45.0 min @Temperature 75.0 °F |
|
ITW Devcon Flexane® Rubber Repair / Castable Urethane Brushable, Black Information provided by ITW Devcon |
|||
Pot Life | 45.0 min @Temperature 23.9 °C |
45.0 min @Temperature 75.0 °F |
|
ITW Devcon Plastic Steel® Metal Repair (A), Dark Grey Information provided by ITW Devcon |
|||
Pot Life | 45.0 min @Temperature 25.0 °C |
45.0 min @Temperature 77.0 °F |
|
Momentive Performance Materials RTV88 Red Extreme High Temperature Potting/Encapsulating Compound Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough mate.. |
|||
Pot Life | 45.0 min @Temperature 25.0 °C |
45.0 min @Temperature 77.0 °F |
100 grams |
Trelleborg Emerson & Cuming Eccobond® 43 Heat Cure Catalyst Emerson & Cuming 43 Eccobond® Heat Cure CatalystRoom temperature gelling version of 28. Excellent for low stress potting and bonding. Will post cure in actual use. Combines the benefits of both 9 a.. |
|||
Pot Life | 45.0 min @Temperature 25.0 °C |
45.0 min @Temperature 77.0 °F |
100 grams |
Trelleborg Emerson & Cuming Eccobond® 9 General Purpose Catalyst Emerson & Cuming 9 Eccobond® General Purpose CatalystGeneral purpose, low viscosity. Imparts good physical strength and chemical resistance to cured castings. Recommended for most general purpose a.. |
|||
Pot Life | 45.0 - 50.0 min @Temperature 25.0 °C |
45.0 - 50.0 min @Temperature 77.0 °F |
1 lbm |
Cytec EN-2523 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s.. |
|||
Pot Life | 45.0 - 50.0 min @Temperature 25.0 °C |
45.0 - 50.0 min @Temperature 77.0 °F |
1 lbm |
Cytec EN-2541 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s.. |
|||
Pot Life | 45.0 min @Temperature 23.9 °C |
45.0 min @Temperature 75.0 °F |
|
Devcon Plastic Steel® Liquid (B) Epoxy General Repair EpoxyComments: Steel-filled liquid epoxy can be cast over models for accurate detail reproduction when making holding fixtures, light-gauge forming dies and molds. Hardens in about a.. |
|||
Pot Life | 45.0 min @Temperature 23.9 °C |
45.0 min @Temperature 75.0 °F |
|
Devcon Plastic Steel® Putty (A) Epoxy General Repair EpoxyComments: The original metal-filled epoxy putty used for hundreds of routine maintenance, production and tooling applications. Bonds to most metal, concrete and some plastics. .. |
|||
Pot Life | 45.0 min @Temperature 23.9 °C |
45.0 min @Temperature 75.0 °F |
|
Devcon Underwater Repair Putty (UW) Epoxy Emergency Repair ProductsComments: High-performance technology for repairing, patching and rebuilding equipment in habitually wet environments, even under water. Eliminates the need for substrate t.. |
|||
Pot Life | 45.0 min @Temperature 23.9 °C |
45.0 min @Temperature 75.0 °F |
|
Devcon Wear Guard (Fine Load) Epoxy Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives. |
|||
Pot Life | <= 45.0 min @Temperature 25.0 °C |
<= 45.0 min @Temperature 77.0 °F |
100 g |
Armstrong C-7/H20 Epoxy Adhesive A clear, unfilled, medium viscosity adhesive recommended for use with any Armstrong Activator. Physical property data included covers C-7 used with Activators W and H-20. All other Activators may .. |
|||
Pot Life | 45.0 min @Temperature 25.0 °C |
45.0 min @Temperature 77.0 °F |
100 gm mass |
Aremco Aremco-Bond™ 2300 High Performance Epoxide Milky Clear, 10:1, Low Viscosity, Exceptional Bond Strength. |
|||
Pot Life | 45.0 min @Temperature 25.0 °C |
45.0 min @Temperature 77.0 °F |
100 gm mass |
Aremco Aremco-Bond™ 2310 High Performance Epoxide Ceramic-Filled, 1:1, High Lap Shear and Peel Strength, Autoclavable. |
|||
Pot Life | 45.0 min | 45.0 min | uncured |
Atom Adhesives AA-BOND FDA2 Epoxy Adhesive AA-BOND FDA2 is a medium viscosity epoxy resin system specifically developed for medical device applications. It has been tested in accordance with USP biological reactivity tests, in vivo and recei.. |
|||
Pot Life | 45.0 min | 45.0 min | uncured |
Atom Adhesives AA-BOND FDA8 Epoxy Adhesive AA-BOND FDA8 EPOXY ADHESIVE is a low viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and .. |
|||
Pot Life | 45.0 min | 45.0 min | |
Atom Adhesives AA-BOND FS291 Epoxy Adhesive AA-BOND FS291 is a thixotropic room temperature cure epoxy adhesive system developed for structural bonding applications on vertical or overhead surfaces where its no-sag characteristics are critica.. |
|||
Pot Life | 45.0 min | 45.0 min | uncured |
Atom Adhesives AA-SUPERTHERM 05 Epoxy Adhesive AA-SUPERTHERM 05 is a thixotropic (smooth paste) Pure Diamond ultra-high thermally conductive epoxy two-part adhesive that develops strong, durable, high-impact bonds at room temperature which impro.. |
|||
Pot Life | 45.0 min @Temperature 23.0 °C |
45.0 min @Temperature 73.4 °F |
|
Aremco Corr-Paint™ CP2060 High Temperature Protective Coating Novolac-Epoxy, Silicon Carbide Filled This epoxy and urethane based coating is used for producing corrosion and wear resistant barriers to 500 °F. Typical applications include tanks, pipelines, boilers, precipitators, scrubbers, bag ho.. |
|||
Pot Life | 45.0 min @Temperature 23.9 °C |
45.0 min @Temperature 75.0 °F |
|
Devcon Wear Guard (High Load) Epoxy Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives. |