Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Devcon Wear Guard (Fine Load) Epoxy

Category Polymer , Adhesive , Thermoset , Epoxy , Epoxy Adhesive
Manufacturer Devcon
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Devcon Wear Guard (Fine Load) Epoxy.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives.
Physical Properties Metric English Comments
Density 2.23 g/cc
0.0806 lb/in³
Mechanical Properties Metric English Comments
Hardness, Shore D 87
87
ASTM D2240
Tensile Strength, Ultimate 29.6 MPa
4300 psi
ASTM D638
Modulus of Elasticity 5.86 GPa
850 ksi
In Tension; ASTM D638
Flexural Yield Strength 49.6 MPa
7190 psi
ASTM D790
Compressive Yield Strength 75.8 MPa
11000 psi
ASTM D695
Adhesive Bond Strength 16.38 MPa
2375 psi
Adhesive tensile shear strength; ASTM D1002
Thermal Properties Metric English Comments
CTE, linear 61.0 µm/m-°C

@Temperature 20.0 °C
 33.9 µin/in-°F

@Temperature 68.0 °F
 ASTM D696
Thermal Conductivity 0.757 W/m-K
5.25 BTU-in/hr-ft²-°F
ASTM C177
Maximum Service Temperature, Air 149 °C
300 °F
Operating Temperature
Shrinkage 0.14 %
0.14 %
During Cure; ASTM D2566
Electrical Properties Metric English Comments
Dielectric Constant 46
46
ASTM D150
Dielectric Strength 13.4 kV/mm
340 kV/in
ASTM D149
Processing Properties Metric English Comments
Processing Temperature 21.1 °C
70.0 °F
Pot Life 45.0 min

@Temperature 23.9 °C
 45.0 min

@Temperature 75.0 °F
Descriptive Properties Value Comments
Coverage per lb. 50 in²
at 1/4 inch thick
Mix Ratio by Volume 2 to 1
resin:hardener
Mix Ratio By Weight 2 to 1
resin:hardener
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved