- HOME
- POLYMER SEARCH
- Thermoset
- Polyurethane, TS
- ITW Devcon Flexane® Rubber Repair / Castable Urethane Brushable, Black
ITW Devcon Flexane® Rubber Repair / Castable Urethane Brushable, Black
| Category | Polymer , Adhesive , Thermoset , Polyurethane, TS |
| Manufacturer | ITW Devcon |
| Trade Name | Flexane® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ITW Devcon Flexane® Rubber Repair / Castable Urethane Brushable, Black.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by ITW Devcon
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.07 g/cc | 0.0385 lb/in³ | |
| Viscosity | 40000 cP | 40000 cP | Mixed Viscosity |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 86 | 86 | Cured; ASTM D2240 |
| Tensile Strength at Break | 24.1 MPa | 3500 psi | ASTM D412 |
| Elongation at Break | <= 600 % | <= 600 % | ASTM D412 |
| Tear Strength | 70.1 kN/m | 400 pli | ASTM D624 |
| Taber Abrasion, mg/1000 Cycles | 90 | 90 | H-18 wheel (1000 gram load) |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 48.9 °C | 120 °F | wet |
| 82.2 °C | 180 °F | dry | |
| Shrinkage | 23 % | 23 % | Cured (shrinkage due to solvent loss); ASTM D2566 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | ASTM D149 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 1440 min | 24.0 hour | Functional cure |
| Pot Life | 45.0 min @Temperature 23.9 °C |
45.0 min @Temperature 75.0 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Coverage per pound, in² @ 1/4" thickness | 104 | |
| Mix ratio by weight (Resin:Hardener) | 80:20 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Cycoloy® CY5000 PC+ABS (Europe-Africa-Middle East)
- NOVA Chemicals Novapol® LC-0717-A LDPE Extrusion Resin
- Kennametal Stellite Stellite® 6B solution heat-treated at 1232°C, 12.7 mm (1/2 in.) thick plate
- Iran Petrochemical (PCC) BL 4M HM 8355 High Density Polyethylene
- Techmer ES Electrablend® PA6/6 03002 CF Carbon Filled
- ExxonMobil 275 NC Mobiltac
- ExxonMobil Bicor™ 70 CSR-M OPP Film
- Aclo Accutech Polypropylene Homopolymer HP0336M10L Mica Reinforced
- 3M Scotch® 24 Electrical Shielding Tape
Copyright © lookpolymers.com All Rights Reserved