Aremco Corr-Paint™ CP2060 High Temperature Protective Coating Novolac-Epoxy, Silicon Carbide Filled

Category	Other Engineering Material , Ceramic/Metallic Coating , Polymer , Thermoset , Epoxy , Epoxy, High Temperature
Manufacturer	Aremco
Trade Name	Corr-Paint™
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Aremco Corr-Paint™ CP2060 High Temperature Protective Coating Novolac-Epoxy, Silicon Carbide Filled.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

This epoxy and urethane based coating is used for producing corrosion and wear resistant barriers to 500 °F. Typical applications include tanks, pipelines, boilers, precipitators, scrubbers, bag houses, cyclones, hoppers and other process equipment used in the power, pulp and paper, and chemical processing industries.

Physical Properties	Metric	English	Comments
Specific Gravity	1.90 g/cc	1.90 g/cc
Solids Content	100 %	100 %	weight
	100 %	100 %	volume
Volatile Organic Compounds (VOC) Content	0.00 g/l	0.00 g/l
Thickness	>= 1270 microns	>= 50.0 mil	estimated wet film thickness
	>= 1270 microns	>= 50.0 mil	recommended dry film thickness
Storage Temperature	4.44 - 32.2 °C	40.0 - 90.0 °F

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	90	90	for Epoxy Coating
Elongation at Break	2.0 %	2.0 %	for Epoxy Coating
Flexural Strength	79.3 MPa	11500 psi	for Epoxy Coating
Compressive Strength	82.7 MPa	12000 psi	for Epoxy Coating
Adhesive Bond Strength	6.21 MPa @Temperature 175 °C	900 psi @Temperature 347 °F	Lap Shear Strength vs. Aluminum
	8.27 MPa @Temperature 150 °C	1200 psi @Temperature 302 °F	Lap Shear Strength vs. Aluminum
	13.8 MPa @Temperature 100 °C	2000 psi @Temperature 212 °F	Lap Shear Strength vs. Aluminum
	15.9 MPa @Temperature 25.0 °C	2300 psi @Temperature 77.0 °F	Lap Shear Strength vs. Aluminum

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	260 °C	500 °F
Flash Point	>= 93.3 °C	>= 200 °F

Processing Properties	Metric	English	Comments
Processing Temperature	10.0 - 32.2 °C	50.0 - 90.0 °F	Application Temperature
Dry Time	4.00 hour	4.00 hour	Touch
	4.00 - 8.00 hour	4.00 - 8.00 hour	Recoat
	6.00 - 8.00 hour	6.00 - 8.00 hour	Handling
Cure Time	360 min @Temperature 121 °C	6.00 hour @Temperature 250 °F	>8 Hour Air Set Required Prior to Curing
	2880 min @Temperature 22.2 °C	48.0 hour @Temperature 72.0 °F	>8 Hour Air Set Required Prior to Curing
Pot Life	45.0 min @Temperature 23.0 °C	45.0 min @Temperature 73.4 °F
Shelf Life	12.0 Month @Temperature 23.0 °C	12.0 Month @Temperature 73.4 °F

Descriptive Properties	Value	Comments
Color	Gray
Dry Film Coverage ft2/gal	1604	at 1 mil
Mix Ratio By Weight	100:8	Novolac:Epoxy
Mixed Viscosity	Paste
Primer	Not Required or Recommended
Thinner	Not Required or Recommended

Users viewing this material also viewed the following: