Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
PolyOne OnForce™ LFT SF-40LGF/001 Natural Polyphenylene Sulfide (PPS) PolyOne's Long Fiber Thermoplastic (LFT) compounds are formulated for demanding applications which require high stiffness and good impact such as metal replacement or other structural applications. .. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | hydrometer |
3M Dyneon™ TF 5235 PTFE Dispersion
(discontinued **) Used for formulation of coating systems; impregnation.Dyneon PTFE dispersions are aqueous dispersions developed for use in metal coating formulations and for application of impregnation and fabric c.. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
Menzolit Menzolit® SMC 0600 Unsaturated Polyester UP SMC 0600 is a specially formulated SMC for reduced moulding pressure (< 30 bar). The glass level has been selected to combine good mouldability with strength and stiffness. Even without a specific f.. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
Solvay Specialty Polymers Amodel® A-4422 LS WH118 Polyphthalamide (PPA), 22% Mineral Amodel® A-4422 LS resin is a 22% reinforced, light-stabilized, high-reflectivity white grade of polyphthalamide (PPA). The material exhibits high heat resistance, high strength and stiffness over.. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Valox® V9280LW PET (Europe-Africa-Middle East) 40% Glassfiber / Mineral Filled PET, Impact Modifier, Mold Release, Heat StabilizedThis data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP Thermocomp EF008E PEI LNP* Thermocomp* EF008E is a compound based on Polyetherimide resin containing Glass Fiber. Added features of this material include: Easy Molding.This data was supplied by SABIC-IP for the Americas.. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ASTM D 792 |
SABIC Innovative Plastics LNP Thermocomp EF008E PEI LNP* Thermocomp* EF008E is a compound based on Polyetherimide resin containing Glass Fiber. Added features of this material include: Easy Molding.This data was supplied by SABIC-IP for the Americas.. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP Thermocomp EF008E PEI (Asia Pacific) LNP* Thermocomp* EF008E is a compound based on Polyetherimide resin containing Glass Fiber. Added features of this material include: Easy Molding.This data was supplied by SABIC-IP for the Asia Pac.. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP Thermocomp GF008 PSU (Asia Pacific) LNP* Thermocomp* GF008 is a compound based on Polysulfone resin containing Glass Fiber.This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP THERMOCOMP JF006LXZ PES (Asia Pacific) LNP* Thermocomp* JF006LXZ is a compound based on Polyethersulfone resin containing Glass Fiber. Added features of this material include: Low Extractible. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP Verton RV00AESM PA 66 (Europe-Africa-Middle East) LNP* VERTON* RV00AESM is a compound based on PA66 resin containing Long Glass Fiber. Added features include: Easy Moldin, Heat Stabilized.This data was supplied by SABIC-IP for the Europe-Africa-Mid.. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP VERTON RV00AEX5 PA6.6 (Europe-Africa-Middle East) LNP* VERTON* Is a compound based on PA66 resin containing Long Glass Fiber. Added features include: Easy Molding, Heat Stabilized. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
Polyplastics Duranex® 6302T Polybutylene Terephthalate (PBT), Low friction, Low wear, Mineral filled DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers .. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
Polyplastics FR-PET® B3030FA Glass Fiber Reinforced Polyethylene Terephthalate (GF-PET), Slow burning, General purpose Information provided by PolyPlastics. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
Polyplastics FR-PET® BLR6001MZ Glass Fiber Reinforced Polyethylene Terephthalate (GF-PET) Information provided by PolyPlastics. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | D792 |
Zhejiang Juner 302-G30 30% Glass Fibre Reinforced, Flammable Resistant, and Low Separate Out Mode Applications: Electrons and Electricity: TV Components, Plugs of Computers, Exhaust Fans of Computers, Plugs, Sockets, Shells of Electronics, Framework of Level Output Transformers, Pipe Pedestals, .. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | |
Zircar Refractory Composites RS-A1 Refractory Sheet This product is made from Type RS-A Moldable. Type RS-A was developed as an asbestos board replacement for induction coil liners and molten metal transport, and contains no asbestos. Refractory Shee.. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
DSM Arnite® TV4 244 S PBT-GF20 FR 20% Glass Reinforced, Flame Retardant |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | |
Cytec Thornel® VCB-20 Carbon Cloth/Epoxy Composite Data provided by the manufacturer, Amoco Performance Products, Inc. Cured ply 0.47 mm thick, 55% fiber vol.Thornel® products were sold by Amoco and are now owned by Cytec. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
Eurostar Starflam AFR682A1 PA66, Mineral Reinforced, Flame Retardant, Injection Molding Starflam AFR682A1 is a Flame Retardant, Mineral Filled Polyamide 66, Injection Molding ResinInformation provided by Eurostar. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | Silicone Property; Arlon SQA-TMS-024 |
Arlon 32980XA015 0.015" Uncured Silicone Rubber on Polyester Film Design/Construction:Interleave: 2.5 mil PolyethyleneSide 1: Uncured Silicone RubberCarrier: Polyester FilmThis data represents typical values for the production material and should not be used as .. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | |
BASF Heligoen® Blue K 7090 Color Additive Chemical Structure: Cu-phthalocyanine betaApplication: Colourant for plastics; PVC-p, PVC-u, PUR, LD-PE, HD-PE, PP, PS, SB, SAN, PMMA, PA, PETP, CA/CAB, and UPRecommendations for food applications: .. |
|||
Density | 1.60 - 1.62 g/cc | 0.0578 - 0.0585 lb/in³ | |
Beijing Evergrow Resources CFC-DD-1000 Carbon Fiber Cloth The viscose yarn(cloth) are converted into carbon fiber(cloth) by the special process of weaving, preoxidization, carbonization aftertreatment etc. It has the good high temperature resistance, corro.. |
|||
Density | 1.60 - 1.62 g/cc | 0.0578 - 0.0585 lb/in³ | |
Beijing Evergrow Resources CFC-DDX-1000S Carbon Fiber Cloth The viscose yarn(cloth) are converted into carbon fiber(cloth) by the special process of weaving, preoxidization, carbonization aftertreatment etc. It has the good high temperature resistance, corro.. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ASTM D792 Method A |
Arlon 33N Polyimide Laminate and Prepreg High reliability and high temperature material33N is a flame retardant polyimide laminate and prepreg system where the excellent high performance properties of polyimide need to be combined with fla.. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
Hexion Bakelite™ PF 6501 Phenolic Formaldehyde Resin, Low Shrinkage Phenolic molding compound, inorganically filled, glass fiber reinforced, high dimensional stability at raised temperature, good media resistance, heat-resistant.Application areas: Thermally and dyna.. |
|||
Density | 1.60 g/cc | 0.0578 lb/in³ | ISO 1183 |
Polyram RamTal PM340S6 Polyacetal for Injection Molding, 30% Glass-Beads Filled 30% Glass-beads filled polyacetal for injection molding applications.Information provided by Polyram. |