Polymer Property : Density = 1.22 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	1.22 g/cc	0.0441 lb/in³	ASTM D792
Owens Corning Glass Fiber Reinforced Acrylonitrile Butadiene Styrene (ABS), 20 wt.% glass ABS is highly resistant to weak acids and alkalis, and provides good resistance to most organic solvents. It is attacked by sulfuric and nitric acids, and is soluble in esters, ketones and ethylene ..
Density	1.22 g/cc	0.0441 lb/in³	ISO 1183
Polykemi AB POLYblend 45FS GF20 PC/ABS-Blend, Glass Fiber reinforced Information provided by Polykemi AB
Density	1.22 g/cc	0.0441 lb/in³	ASTM D792
Polymer Resources ABS-FR1 ABS, Flame Retardant Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Density	1.22 g/cc	0.0441 lb/in³
Covestro Makroblend® UT-408 Polycarbonate + Polyester Blend (discontinued **) Key Features:UnfilledHigh impact or high impact modifiedLight stabilized or stable to lightSuitable processing methods:Injection moldingInformation provided by Bayer Polymers.As of 1 September 2015,..
Density	1.22 g/cc	0.0441 lb/inÂ³	ASTM D792
Huntsman IROGRANÂ® A 98 E 4066 Polyester-Based TPU-High Performance Grade Introduction: IROGRAN A 98 E 4066 is a thermoplastic polyester- polyurethane for injection molding applications. Additional characteristics of the product are very short cycle times and high dimensi..
Density	1.22 g/cc	0.0441 lb/inÂ³	ISO 1183
Solvay Specialty Polymers AmodelÂ® AT-6115 HS Polyphthalamide (PPA), 15% Glass Fiber (Dry) AmodelÂ® AT-6115 HS is a 15% glass-fiber reinforced, toughened grade of polyphthalamide (PPA) resin designed to possess more elongation than other 15% glass-fiber reinforced grades of Amodel resin..
Density	1.22 g/cc	0.0441 lb/inÂ³	ISO 1183
SABIC Innovative Plastics LNP STAT-KON DX05301C PC (Asia Pacific) Low Ionic, Low Outgassing, Low LPC and ESD safe Polycarbonate compound suitable for Semiconductor and Hard Disk Drive (HDD) application.Added features of this material include: Clean Compounding Sys..
Density	1.22 g/cc	0.0441 lb/inÂ³	ISO 1183
SABIC Innovative Plastics XenoyÂ® CL402U PBT+PC (Europe-Africa-Middle East) XENOY CL402U has been specially developed for extrusion blowmoulding applications, where higher melt strength is desired. XENOY CL402U is a high impact material combined with good UV resistance perf..
Density	1.22 g/cc	0.0441 lb/inÂ³	ASTM D792
Techmer ES HiFillÂ® PP G/CF40 CC 40% Glass/Carbon Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass/Carbon Fiber Reinforcement, 40% Filler by WeightFeatures: Chemically CoupledInformation provided by TP Composites, Inc.
Density	1.22 g/cc	0.0441 lb/inÂ³	ISO 1183
SABIC Innovative Plastics LNP THERMOCOMP QC006 PA6.10 (Europe-Africa-Middle East) LNP * THERMOCOMP* QC006 is a compound based on PA610 resin containing Carbon Fiber. Added features include; Electrically Conductive.
Density	1.22 g/cc	0.0441 lb/inÂ³	ISO 1183
SABIC Innovative Plastics XenoyÂ® 1731A PBT+PC (Asia Pacific) PBT+PC, Good Impact , Excellent physical property retention in automotive exteriors and OVAD.This data was supplied by SABIC-IP for the Asia Pacific region.
Density	1.22 g/cc	0.0441 lb/inÂ³	ASTM D792
Techmer ES HiFillÂ® HIPS TM40 WT 40% Talc Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Talc Filler, 40% Filler by WeightAppearance: WhiteInformation provided by TP Composites, Inc.
Density	1.22 g/cc	0.0441 lb/inÂ³	ASTM D792
SABIC Innovative Plastics LNP THERMOCOMP MX99432 PP (Asia Pacific) LNP* Thermocomp* MX99432 is a compound based on Polypropylene resin containing Glass Fiber.
Density	1.22 g/cc	0.0441 lb/in³	ISO 1183
Polyram Polytron P40N03 Polypropylene, 40% Long Glass Fibers Is a chemically coupled 40% long glass fibers reinforced natural polypropylene, heat stabilized, for injection molding applications. These products have significantly improved impact performance ch..
Density	1.22 g/cc	0.0441 lb/in³	ISO 1183
EMS-Grivory Grivory® TSC-20/4 EC black 9832 PA666-CF20 Information provided by EMS Grivory
Density	1.22 g/cc	0.0441 lb/in³	ASTM D792
Entec Hypro™ PPH-GF40 Natural Homopolymer Polypropylene, 40% Glass Reinforced Information provided by Entec
Density	1.22 - 1.26 g/cc	0.0441 - 0.0455 lb/in³	ISO R 1183
Fainplast Compounds GS 6802 Flexible PVC, Injection Molding for Footwear Soles
Density	1.22 - 1.26 g/cc	0.0441 - 0.0455 lb/in³	ISO R 1183
Fainplast Compounds GS 7303 Flexible PVC, Injection Molding for Footwear Soles
Density	1.22 g/cc	0.0441 lb/in³	ISO 1183
EMS-Grivory Grivory® LBV-30H FWA nat PA12-GF30 Product Description: Grilamid LBV-30H FWA natural is a 30% glass fiber reinforced, heat stabilized polyamide 12 injection molding grade with the following special features: Stiffness combined with h..
Density	1.22 g/cc	0.0441 lb/in³	ISO 1183
DuPont Performance Polymers Hytrel® G5544 Polyester Elastomer TPC-ET (Unverified Data**) 55 Shore D Standard Performance Polyester Elastomer with Heat Ageing ProtectionHytrel G5544 is a medium modulus grade with nominal hardness of 55D. It contains discoloring stabilizer. It can be proc..
Density	1.22 - 1.26 g/cc	0.0441 - 0.0455 lb/in³	ISO R 1183
Fainplast Compounds MGS 91/T Medical Flexible PVC, Injection Molding Connectors and special components
Density	1.22 - 1.26 g/cc	0.0441 - 0.0455 lb/in³	ISO R 1183
Fainplast Compounds PM 5526/1 Flexible PVC, Lead Free Gaskets for frames
Density	1.22 g/cc	0.0441 lb/in³	Silicone Property; Arlon SQA-TMS-024
Arlon 32570R040 0.040" (1.02 mm) Uncured Silicone Rubber with Fiberglass Carrier Design/Construction: Interleave: PolyethyleneSide 1: Uncured Silicone RubberCarrier: PTFE Coated FiberglassThis data represents typical values for the production material. The data should not be use..
Density	1.22 g/cc	0.0441 lb/in³	ISO 1183-1-A
BASF Elastollan C 98 A TPUR Description: Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties and chemical resistance, outstanding wear resistance, high tear and tensile strength, good damping c..
Density	1.22 g/cc	0.0441 lb/in³	ASTM D792
BASF Elastollan® S85A Polyester Type Polyurethane Elastomer Processed by extrusion or injection molding. Elastollan S series of products are polyester-based thermoplastic polyurethanes that exhibit good hydrolytic stability. They also exhibit good oil, fue..
Density	1.22 g/cc	0.0441 lb/in³
BASF Lupranate® 265 Isocyanate Description: Lupranate® 265 Isocyanate, a solid at room temperature, is essentially pure 4,4´-diphenylmethane diisocyanate, having a functionality of 2.0. Lupranate 265 Isocyanate is used in the i..
Density	1.22 g/cc	0.0441 lb/in³
BASF Lupranate® TF2115 Isocyanate Description: Lupranate® TF2115 Isocyanate is a low viscosity polymeric diphenylmethane diisocyanate (polymeric-MDI) enriched with monomeric-MDI.Information provided by BASF
Density	1.22 g/cc	0.0441 lb/in³	ASTM D792
Techmer ES Luriblend® HTN 01410 BK Availability: North AmericaForms: PelletsAdditive: Graphite Powder Lubricant and Molybdenum Disulfide LubricantFeatures: Good Wear Resistance, Low Friction, High Heat Resistance and LubricatedAppear..
Density	1.22 g/cc	0.0441 lb/in³	ASTM D792
Toyobo A1061D Thermoplastic Polyurethane Elastomer, Injection Grade Polybutyleneadipate type, the most general purpose type of Toyobo Polyurethane; features excellent cost-performance. Various grades of Toyobo polyurethane TPEs are used in auto parts, hoses, tubes,..