Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Unitika A1030GFL PA6, 30% Glass Fiber Reinforced, Dry

Category Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 30% Glass Fiber Filled
Manufacturer Unitika
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Unitika A1030GFL PA6, 30% Glass Fiber Reinforced, Dry.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Information provided by Unitika Ltd.
Physical Properties Metric English Comments
Density 1.36 g/cc
0.0491 lb/in³
ISO 1183
Water Absorption 1.3 %

@Time 86400 sec
 1.3 %

@Time 24.0 hour
 ISO 62
Moisture Absorption at Equilibrium 2.0 %
2.0 %
50% RH; ISO 62
Linear Mold Shrinkage, Flow 0.0020 cm/cm

@Thickness 3.20 mm
 0.0020 in/in

@Thickness 0.126 in
Linear Mold Shrinkage, Transverse 0.0070 cm/cm

@Thickness 3.20 mm
 0.0070 in/in

@Thickness 0.126 in
Mechanical Properties Metric English Comments
Hardness, Rockwell R 120
120
ISO 2039
Tensile Strength at Break 170 MPa
24700 psi
ISO 527-1/-2
Elongation at Break 3.1 %
3.1 %
ISO 527-1/-2
Tensile Modulus 9.60 GPa
1390 ksi
ISO 527-1/-2
Flexural Strength 250 MPa
36300 psi
ISO 178
Flexural Modulus 8.20 GPa
1190 ksi
ISO 178
Charpy Impact Unnotched 7.00 J/cm²
33.3 ft-lb/in²
ISO 179-1
Charpy Impact, Notched 1.10 J/cm²
5.23 ft-lb/in²
ISO 179-1
Thermal Properties Metric English Comments
CTE, linear 31.0 µm/m-°C
17.2 µin/in-°F
ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi) 217 °C
423 °F
ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 203 °C
397 °F
ISO 75-1/-2
Flammability, UL94 HB

@Thickness 0.750 mm
 HB

@Thickness 0.0295 in
Electrical Properties Metric English Comments
Volume Resistivity 2.00e+13 ohm-cm
2.00e+13 ohm-cm
IEC 60093
Dielectric Constant 3.3

@Frequency 1.00e+6 Hz
 3.3

@Frequency 1.00e+6 Hz
 IEC 60250
Dielectric Strength 42.1 kV/mm

@Thickness 1.00 mm
 1070 kV/in

@Thickness 0.0394 in
 IEC 60243-1
Dissipation Factor 0.022

@Frequency 1.00e+6 Hz
 0.022

@Frequency 1.00e+6 Hz
 IEC 60250
Comparative Tracking Index 550 V
550 V
IEC 60112
Processing Properties Metric English Comments
Rear Barrel Temperature 255 - 265 °C
491 - 509 °F
Middle Barrel Temperature 250 - 260 °C
482 - 500 °F
Front Barrel Temperature 230 - 240 °C
446 - 464 °F
Nozzle Temperature 255 - 265 °C
491 - 509 °F
Mold Temperature 80.0 - 100 °C
176 - 212 °F
Back Pressure 3.00 - 5.00 MPa
435 - 725 psi
Descriptive Properties Value Comments
Primary Pressure 80-90 MPa
Secondary Pressure 60-80 MPa
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved