Formosa Plastics Formolene® HL4506 Blow Molding HDPE (discontinued **)

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Blow Molding Grade
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Formosa Plastics Formolene® HL4506 Blow Molding HDPE (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Extra High Molecular Weight Hexene CopolymerApplications: Multi-layer fuel tanks, mono-layer fuel tanks, industrial bulk containers (IBC)Formolene HL4506 is intended for large part blow molding applications. Besides having excellent fuel resistance properties HL4506 HDPE has outstanding environmental stress crack resistance properties and exceptional impact properties.Formolene HL4506 meets all requirements of ASTM - Type III, Category 5 and ASTM 4967-89-PE235.Produced using licensor formulation for C579. Licensor does not warrant or imply that this product meets their specifications for C579.Nominal properties reported herein were determined on compression molded specimens prepared in accordance with Procedure C of ASTM D1928. Physical properties are typical of product but do not reflect normal testing variance and therefore should not be used for specification purposes.Information provided by Formosa Plastics Corporation, USA.

Physical Properties	Metric	English	Comments
Density	0.945 g/cc	0.0341 lb/in³	ASTM D1505
Environmental Stress Crack Resistance	>= 2000 hour	>= 2000 hour	Condition A (100% Igepal), F<sub>50</sub>; ASTM D1693
	>= 2000 hour	>= 2000 hour	Condition B (10% Igepal), F<sub>50</sub>; ASTM D1693
High Load Melt Index	5.0 g/10 min @Load 21.6 kg, Temperature 190 °C	5.0 g/10 min @Load 47.6 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	66	66	ASTM D2240
Tensile Strength, Yield	22.1 MPa	3200 psi	2" (50mm) per min.; ASTM D638 Type IV
Elongation at Break	>= 600 %	>= 600 %	2" (50mm) per min.; ASTM D882
Flexural Modulus	1.03 GPa	150 ksi	ASTM D790
Dynatup @ -30°C	475 J	350 ft-lb	Tensile Impact

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	73.0 °C	163 °F	ASTM D648
Vicat Softening Point	127 °C	261 °F	ASTM D1525
Brittleness Temperature	<= -79.4 °C	<= -111 °F	ASTM D746

Users viewing this material also viewed the following: