Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Modulus | 1.03 GPa | 150 ksi | ASTM D790 |
Multibase Multi-Pro® 2513 C Whirlpool White Polypropylene Forms:PelletsProcessing Methods:Injection MoldingInformation provided by Multibase |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | Tangent; ASTM D790 |
RheTech Products FRP255-01 Polypropylene Copolymer, Flame Retardant, Black Applications: Electrical component housingsConsumer goodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | Tangent; ASTM D790 |
RheTech Products FT4200-01 Thermoplastic Polyolefin, Non-UV Stabilized, Black Applications: Body side moldingsGrillesElectrical housingsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Flexural Modulus | >= 1.03 GPa | >= 150 ksi | ASTM D790 |
S&E Specialty Polymers GPP1005HF Series PP Application: UL94 V-2, Flame-retardant polypropylene compounds for injection molding applications.Information provided by S&E Specialty Polymers |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | 0.05 in/mm, 1% Secant; ASTM D790A |
Phillips 66 COPYLENE® CM010G Polypropylene Impact Copolymer |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | 0.05 in/min; 1% secant; Procedure A; ASTM D790 |
Phillips 66 COPYLENE® CR750CL-02 Polypropylene, Random Copolymer, NX-8000 based COPYLENE™ CR750CL-02 is an easy molding, high melt flow random copolymer that has good see-through and contact clarity in injection molding applications and is formulated with advanced technology. .. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | ASTM D790 |
Formosa Plastics Formolene® HL4506 Blow Molding HDPE
(discontinued **) Extra High Molecular Weight Hexene CopolymerApplications: Multi-layer fuel tanks, mono-layer fuel tanks, industrial bulk containers (IBC)Formolene HL4506 is intended for large part blow molding appl.. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | 2% Secant-Method 1; ASTM D790 |
Ineos TUB 121N HDPE TUB121N is a natural high density bimodal polyethylene copolymer designed for extrusion of potable water, natural gas, industrial, and mining pipe. When blended with an approved black concentrate, t.. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | ASTM D790 |
Techmer ES Plastiblend® PA6 GF30 RM BK Nylon 6 Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 30% Filler by WeightProcessing Method: Injection MoldingInformation provided by TP Composites, Inc. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | ASTM D790 |
A. Schulman POLYTROPE™ TPP 615 Olefinic Elastomer DescriptionPolytrope TPP 615 is an olefinic elastomer developed to exhibit very low thermal expansion, high DOI on painted parts with good low temperature impact properties. ApplicationTPP 615 is de.. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | ASTM D790 |
Chase Plastics CP Pryme® NN300HSL (COND, 50% RH) Nylon 66 (Utility Grade), Heat Stabilized, Internally Lubricated Information provided by Chase Plastics. |
|||
Flexural Modulus | 1.03 GPa @Strain 2.00 % |
150 ksi @Strain 2.00 % |
ASTM D790 |
Total HDPE XT25N High Density Polyethylene, Pipe Resin Polyethylene: High molecular weight, bimodal pipe resin. PPI TR4 designation PE4710 /PE100 for demanding installations. Every batch certified to meet 2500 hrs PENT according to ASTM F1473.Charact.. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | 1.3mm per min, 1% secant; ASTM D790 |
Formosa Plastics Formolene® 3335N Random Copolymer Polypropylene Random Copolymer for Containers, Totes and Bins, and Closures Formolene® 3335N is a high melt flow random copolymer with fast cycle time and easy mold release. It is designed for thin walled, injec.. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | 1.3mm per min, 1% secant; ASTM D790 |
Formosa Plastics Formolene® 3355E Random Copolymer Polypropylene Random Copolymer for Containers, Totes and Bins, and Closures Formolene® 3355E is a high melt flow random copolymer with fast cycle time and good mold and denesting release. It is designed for inje.. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | |
TriStar TriSteel AC Metal Backed PTFE Bearing System Ultraflon 601 (AC) POM lined metal backed bearing system, boundary lubrication required, high PV. Ultraflon 601 POM Liner is a lubricant enhanced acetal material for use in lubricated or unlubricate.. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | |
TriStar TriSteel AT Metal Backed PTFE Bearing System Ultraflon 601T (AT) POM bronze with PTFE, lined metal back bearing system, high PV, self lube, high speed. This liner will run with zero lubrication required. Most commonly used in clip bearings, li.. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | 1.3mm per min, 1% secant; ASTM D790 |
Formosa Plastics Formolene® 2510A Injection Applications Polypropylene Impact Copolymer with Nucleating, Antistat AdditivesApplications: Closures, housewares, small appliances, battery cases and lids.Formolene 2510A is a medium impact copolymer of polypropylene charact.. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | ASTM D790 |
A. Schulman PP 1817-01 Polypropylene Utility Grade Random Co-Polymer DescriptionPolypropylene PP 1817-01 is a utility grade random co-polymer which can be used for general purpose injection molding, extrusion, or blow molding applications. It does not have a gel spe.. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | ASTM D790 |
Lubrizol ESTANE® 58138 Ester Based Thermoplastic Polyurethane Description: Estane® thermoplastic polyurethanes (TPUs) include elastomeric materials that bridge the gap between flexible rubber and rigid plastics. These materials offer toughness and durability .. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | ASTM D790 |
ExxonMobil HDPE BU46-055 High Density Polyethylene Resin Product Description: BU46-055 is a high molecular weight, high density polyethylene copolymer which contains a UV inhibitor. It possesses a combination of excellent processability, outstanding melt .. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | Compression molded parts prepared according to ASTM D 1928, method 1, procedure B.; ASTM D790 |
Dow CONTINUUM™ DGDC-2480 NT Bimodal Polyethylene Resin CONTINUUM™ DGDA-2490 NT is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long term hydrostatic strength combined with outstanding resistan.. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | 1% Secant; ASTM D790 |
ExxonMobil HDP8760.29 Rotational Molding Resin Product Description: HD 8760 is a high density hexene copolymer designed to offer outstanding stiffness and processability. This resin is ideally suited for applications that require the optimum bal.. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | 1.3 mm/min, 1% Secant; ASTM D790 |
Amco PRIMATOP PP CO 008NB Impact Polypropylene Copolymer PP CO 008 NB features an excellent balance of toughness and stiffness. Applications include blow molded bottles and containers, blown and cast film applications, and profile extrusions.Former A-Top .. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | ASTM D790 |
Aaron Industries AVPP C 200-2 MELT 30 Clarified Virgin Polypropylene A natural polypropylene copolymer resin specifically designed for injection molding applications - containing clarifiers. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | 1% Secant; ASTM D790 |
ExxonMobil HD 8760.29 Rotational Molding Resin Product Description: HD 8760 is a high density hexene copolymer designed to offer outstanding stiffness and processability. This resin is ideally suited for applications that require the optimum bal.. |
|||
Flexural Modulus | 1.03 GPa | 150 ksi | ASTM D790 |
PolyOne Edgetek® UR-20GF/000 Thermoplastic Elastomer - TPU, Glass Filled
(discontinued **) Description/Features:Glass Fiber ReinforcedUL 94 HBPolyOne First ChoiceInformation provided by PolyOne Corporation. |