Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 22.1 MPa | 3200 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 45 PHR Iceberg Clay Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2" (50mm) per min.; ASTM D638 Type IV |
Formosa Plastics Formolene® HL4506 Blow Molding HDPE
(discontinued **) Extra High Molecular Weight Hexene CopolymerApplications: Multi-layer fuel tanks, mono-layer fuel tanks, industrial bulk containers (IBC)Formolene HL4506 is intended for large part blow molding appl.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
LyondellBasell Petrothene® KR92717 High Density Polyethylene ApplicationsPETROTHENE KR 92717 is a high molecular weight, high density polyethylene-based compound designed for use in spacer cable insulation and cable jacketing applications. This black compoun.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
Global PPC-0320 Standard Grade Polypropylene Information provided by Global Polymers Corporation. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
Multibase Multi-Flamâ„¢ 2103 HDPE Polyethylene Features:Flame RetardantHalogen Content, Low to NoneBlooming, None Forms:PelletsProcessing Methods:Injection MoldingExtrusionCoextrusionUses:TubingPipingInformation provided by Multibase |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D412 |
Teknor Apex APEX® 3202-90 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Caps, Closure, Connectors, Food Service Applications, Safety Equipment, Valves/Valve Parts Appearance-Cl.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
A. Schulman PP 1404-01 Polypropylene High Impact Polypropylene DescriptionPolypropylene PP 1404-01 is a medium flow, high-impact polypropylene for injection molded parts. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | At 50 mm/min; ASTM D683 IV |
Borealis Borecene Compact™ RM7406 Black Metallocene Linear Polyethylene for Rotational Molding Borecene Compact RM7406 is a third generation linear medium density black polyethylene for rotational molding. The narrow molecular weight imparted through metallocene catalyst technology provides .. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | At 50 mm/min; ASTM D683 IV |
Borealis Borecene™ RM7402 Linear Polyethylene for Rotational Molding Borecene RM7402 is a third generation linear medium density natural polyethylene for rotational molding. The narrow molecular weight distribution imparted through metallocene catalyst technology pro.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | At 50 mm/min; ASTM D683 IV |
Borealis Borecene™ RM7403 Linear Polyethylene for Rotational Molding Borecene Compact RM7403 is a third generation linear medium density black polyethylene for rotational molding. The narrow molecular weight imparted through metallocene catalyst technology provides .. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
A. Schulman PP 1404-01 Polypropylene High Impact Polypropylene DescriptionPolypropylene PP 1404-01 is a medium flow, high-impact polypropylene for injection molded parts. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2"/min; ASTM D638 |
A. Schulman LP477-01 High-Density Polyethylene DescriptionLP 477-01 is a high-density polyethylene possessing excellent impact strength for blow molded bleach and detergent bottles, thermoformed industrial parts, tote boxes, trays, liners and ph.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2"/min; ASTM D638 |
A. Schulman LP544-01 High-Density Copolymer Polyethylene DescriptionLP 544-01 is a high-density copolymer polyethylene with exceptional ESCR and crush strength combined with good processability for applications including telecommunication ducting, thermof.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2"/min; ASTM D638 |
A. Schulman LP551-01 Narrow Molecular Weight Copolymer, High-Density Polyethylene DescriptionLP551-01 is a narrow molecular weight copolymer, high-density polyethylene combining excellent impact strength with good environmental stress crack resistance. ApplicationApplications of.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2"/min; ASTM D638 |
A. Schulman LP477-01 High-Density Polyethylene DescriptionLP 477-01 is a high-density polyethylene possessing excellent impact strength for blow molded bleach and detergent bottles, thermoformed industrial parts, tote boxes, trays, liners and ph.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2"/min; ASTM D638 |
A. Schulman LP551-01 Narrow Molecular Weight Copolymer, High-Density Polyethylene DescriptionLP551-01 is a narrow molecular weight copolymer, high-density polyethylene combining excellent impact strength with good environmental stress crack resistance. ApplicationApplications of.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
A. Schulman PP 1404-01 Polypropylene High Impact Polypropylene DescriptionPolypropylene PP 1404-01 is a medium flow, high-impact polypropylene for injection molded parts. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | at max load; ASTM D638 |
A. Schulman PP 1407H-01 Polypropylene High-Impact Polypropylene DescriptionPolypropylene PP 1407H-01 is a relatively medium flow, high-impact polypropylene for injection molded parts. ApplicationPP 1407H-01 meets FDA Regulation 21 CFR 177.1520 for food contact .. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
A. Schulman LP552-01 Narrow Molecular Weight Copolymer, High-Density Polyethylene DescriptionLP 552-01 is a U.L. approved narrow molecular weight copolymer high-density polyethylene combining good flow with excellent stiffness and cold temperature impact strength. It has good tou.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | |
Zylog Hipolyene® X2 DP 4 Thermoplastic Polyolefin & PP Compound Information provided by Zylog Plastalloys Pvt. Ltd. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2 in/min; ASTM D638 |
A. Schulman PP 2173-01 Polypropylene High-Impact Polypropylene DescriptionPolypropylene PP 2173-01 is a relatively medium flow, high-impact polypropylene for injection molded parts. ApplicationPP 2173-01 meets FDA Regulation 21 CFR 177.1250 for food contact app.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | at max load; ASTM D638 |
A. Schulman PP 1407H-01 Polypropylene High-Impact Polypropylene DescriptionPolypropylene PP 1407H-01 is a relatively medium flow, high-impact polypropylene for injection molded parts. ApplicationPP 1407H-01 meets FDA Regulation 21 CFR 177.1520 for food contact .. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2" (50mm) per min.; ASTM D638 |
Formosa Plastics Formolene® 2520A Injection Molding Polypropylene Medium Impact CopolymerApplications: Closures, Housewares, and Small Appliance ApplicationsFormolene 2520A is a medium impact copolymer of polypropylene characterized by its easy mold flow, physical.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2" (50mm) per min.; ASTM D638 Type IV |
Formosa Plastics Formolene® HP4401 Pipe HDPE High Density Hexene CopolymerApplications: Potable water, industrial mining, oil and gas gatheringsFormolene HP4401 is a high performance copolymer that is designed for the most demanding requiremen.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ISO 527-2/1A/50 |
ExxonMobil HDPE HMA 018 High Density Polyethylene Resin Product Description: HMA 018 is an easy flow HDPE grade, characterized by high gloss and dimensional stability. Availability: Africa & Middle East, Asia Pacific and Europe Additive: Thermal Stabili.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
Entec Hypel® PEHD4/.955 HDPE Available in North America Features: Food Contact Acceptable and High DensityAgency Ratings: FDA 21 CFR 177.1520RoHS Compliant Form: Pellets Information provided by Entec |
|||
Tensile Strength, Yield | >= 22.1 MPa | >= 3200 psi | ASTM D638 |
Buckeye Polymers BP HDPE 9501 R BLK High Density Polyethylene Product Information: Our HDPE grade of materials are designed to offer excellent physical properties while providing cost savings versus higher cost prime equivalents. Buckeye Polymers HDPE materia.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D-638 |
Axiall 15643 Wire & Cable Flexible PVC Non-lead stabilized semi-rigid insulation compound recommended for Style #1061 applications. Maximum service temperature of 105°C. The compound is also formulated for fungus and microbe resistanc.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2" (50mm) per min, Type IV; ASTM D638 |
Formosa Plastics Formolene® HP4306 Pipe HDPE
(discontinued **) High Density Hexene Copolymer Formolene® HP4306 is a high performance copolymer that is designed for the most demanding requirements of pressure pipe applications. It is designed specifically for l.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2"/min; ASTM D638 |
A. Schulman LP551-01 Narrow Molecular Weight Copolymer, High-Density Polyethylene DescriptionLP551-01 is a narrow molecular weight copolymer, high-density polyethylene combining excellent impact strength with good environmental stress crack resistance. ApplicationApplications of.. |