Songhan Plastic Technology Co.,Ltd.

Denka LCS Z6060 Thermoplastic Elastomer, Injection Molding Grade (general)

Category Polymer , Thermoplastic , Elastomer, TPE
Manufacturer Denka
Trade Name LCS
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Denka LCS Z6060 Thermoplastic Elastomer, Injection Molding Grade (general).pdf
  Online Service   lookpolymers   27660005
Material Notes:
"DENKA LCS" combines low hardness with a rubber-like texture, having a low permanent compressive distortion/permanent elongation, and is a thermoplastic elastomer that closely resembles vulcanized rubber. It also offers advantages such as a high coefficient of friction, ease of lowering electrical resistance, and good energy-absorbing performance. ApplicationsFor use in automotive components such as weather strips, as well as architectural gaskets, electrical components, etc.
Physical Properties Metric English Comments
Density 1.14 g/cc
0.0412 lb/in³
Evaporation Loss 7.0 %
7.0 %
Mechanical Properties Metric English Comments
Hardness, Shore A 60
Tensile Strength at Break 12.753 MPa
1849.7 psi
Elongation at Break 420 %
420 %
100% Modulus 0.0025506 GPa
0.36994 ksi
Tear Strength 29.4 kN/m
168 pli
kg/cm²; JIS-K-6301
Compression Set 39 %
39 %
70°C, 22hrs; JIS-K-6301
49 %
49 %
100°C, 70hrs; JIS-K-6301
Thermal Properties Metric English Comments
Minimum Service Temperature, Air -38.0 °C
-36.4 °F
Descriptive Properties Value Comments
Heating: Retention Rate of Elongation, % 90
100°C x 120 hrs
Heating: Retention Rate of Tensile Strength, % 110
100°C x 120 hrs
Oil Resistance: Retention of Tensile Strength, % 100
70°C x 4hrs; JIS-K-6723
Oil Resistance: Retention Rate of Elongation, % 95
70°C x 4hrs; JIS-K-6723
Permanent Set, %, 100% 6
Permanent Set, %, 200% 12
Copyright © All Rights Reserved