Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 18.4 µm/m-°C @Temperature 500 °C |
10.2 µin/in-°F @Temperature 932 °F |
|
Outokumpu 4828 High Temperature Austenitic Stainless Steel Standardized high temperature steel for service at temperatures of up to 950-1000°C in dry air. Utilization in the temperature range of 600-900°C can lead to embrittlement.Applications: Heat and .. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 500 °C |
10.2 µin/in-°F @Temperature 932 °F |
|
Outokumpu 4833 High Temperature Austenitic Stainless Steel Standardized high temperature steel for service at temperatures of up to 950-1000°C in dry air. Utilization in the temperature range of 600-900°C can lead to embrittlement.Applications: Heat and .. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 500 °C |
10.2 µin/in-°F @Temperature 932 °F |
|
Outokumpu 4845 High Temperature Austenitic Stainless Steel Standardized high-temperature steel for use at temperatures up to 1100°C in dry air. Prone to embrittlement after exposure between 600-900°C. Applications: Heat and creep resistance. For use o.. |
|||
CTE, linear | 18.3 - 19.3 µm/m-°C @Temperature 20.0 - 300 °C |
10.2 - 10.7 µin/in-°F @Temperature 68.0 - 572 °F |
|
PEAK Werkstoff DISPAL S260 Aluminum Alloy, AlSi25Cu4Mg, Condition F Excellent properties:abrasive stabilityhigh stiffness (E-modulus)resistance even at high temperaturesgood grindabilityPEAK DISPAL materials allow the manufacturing of pistons for highest operational.. |
|||
CTE, linear | 18.3 - 19.3 µm/m-°C @Temperature 20.0 - 300 °C |
10.2 - 10.7 µin/in-°F @Temperature 68.0 - 572 °F |
|
PEAK Werkstoff DISPAL S260 Aluminum Alloy, AlSi25Cu4Mg, Condition T6 Heat Treatment Condition T6 (Quenching in water at RT)Excellent properties:abrasive stabilityhigh stiffness (E-modulus)resistance even at high temperaturesgood grindabilityPEAK DISPAL materials allo.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, 1.32 mm thick sheet, 1177°C heat treatment, rapid air cooled Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, 1.6 mm thick sheet, 1177°C heat treatment, rapid air cooled Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, 12.7 mm (1/2 in.) thick plate, 1185°C heat treatment, water quenched Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, 25.4-50.8 mm forged bar, 1185°C heat treatment, water quenched Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 1185°C heat treatment, rapid air cooled Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 15% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 30% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 40% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 5% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, GTAW, 3.2 mm sheet Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, GTAW, 9.5 mm plate Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, investment-cast, as-cast Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, sand cast, 1171°C heat treatment for 2 hours Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, SMAW, 12.7 mm plate Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 35% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, SMAW, 3.2 mm sheet Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, SMAW, 9.5 mm plate Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature -30.0 - 70.0 °C |
10.2 µin/in-°F @Temperature -22.0 - 158 °F |
|
Schott LITHOTEC-CAF2 Glass Information Provided by SCHOTT North America, Inc. |
|||
CTE, linear | 18.3 µm/m-°C @Temperature 20.0 - 1093 °C |
10.2 µin/in-°F @Temperature 68.0 - 1999 °F |
|
ATI Allegheny Ludlum AL 601™ Nickel-Base Alloy, 1149°C (2100°F) Solution Treated, UNS N06601 Allegheny Ludlum's AL 601 alloy is an austenitic nickel-chromium-iron alloy designed for both heat and corrosion resistance. As compared to AL 600 alloy, the AL 601 alloy has, in addition to increa.. |
|||
CTE, linear | 18.3 µm/m-°C @Temperature 20.0 - 1093 °C |
10.2 µin/in-°F @Temperature 68.0 - 1999 °F |
|
ATI Allegheny Ludlum AL 601™ Nickel-Base Alloy, Annealed at 982°C (1800°F), UNS N06601 Allegheny Ludlum's AL 601 alloy is an austenitic nickel-chromium-iron alloy designed for both heat and corrosion resistance. As compared to AL 600 alloy, the AL 601 alloy has, in addition to increa.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 500 °C |
10.2 µin/in-°F @Temperature 932 °F |
|
Outokumpu 4948 High Temperature Austenitic Stainless Steel Creep-resistant variant of 1.4301, with a standardized minimum carbon content for service at temperatures of up to 800°C in dry air.Applications: Heat and creep resistance. For use over 550°C for.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, 12.7-50.8 mm hot-rolled bar, 1185°C heat treatment, water quenched Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductility, and i.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, 533.4 by 82.55 mm forging, stress relieved at 649°C (1200°F), air cooled Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductility, and i.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 10% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductility, and i.. |
|||
CTE, linear | 18.4 µm/m-°C @Temperature 23.0 - 1100 °C |
10.2 µin/in-°F @Temperature 73.4 - 2010 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 25% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductility, and i.. |