Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Minimum Service Temperature, Air = -40.0 °C Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Resinlab® EP1121 Clear Electronic Grade Epoxy Encapsulant
Resinlab™ EP1121 Clear is a two part unfilled electronic grade epoxy encapsulant designed for small to medium sized castings. It cures completely at room temperature to a tough, flexible polymer. I..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Recommended
Nye Lubricants 181RA (SO) Synthetic Oil
Information provided by Nye Lubricants.
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Recommended
Nye Lubricants 723K (RL) Rheolube Grease
Information provided by Nye Lubricants.
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Recommended
Nye Lubricants 885 (FG) Synthetic Oil
Information provided by Nye Lubricants.
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Non-brittle after 3 minutes
Precision Polymer Engineering E50Q Ethylene Propylene Rubber
Peroxide cured, Ethylene Propylene Terpolymer, 46-55 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Complies with FDA code of Federal regulations title CFR21 section 177.2600. Water ..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Parker Chomerics CHO-SHIELD® 2056 Conductive Coating
CHO-SHIELD® 2054 silver-plated-copper filled commercial-grade coating proved high levels of EMI shielding effectiveness, abrasion resistance and excellent adhesion on a variety of materials used fo..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Parker Chomerics CHO-THERM® 1671 High Power Thermally Conductive Electrical Insulator Pad
Description: CHO-THERM® high-power thermal insulator pads are thermally conductive materials designed for use where the highest possible thermal, dielectric, and mechanical properties are required...
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Parker Chomerics SOFT-SHIELD® 3700 High Temperature Conductive Fabric Over Foam
Description: SOFT-SHIELD® 3700 fabric over foam [fof], is a low-closure force EMI gasket rated to be used in high temperature applications (maximum temperature 125°C). This enables fabric over foa..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Parker Chomerics CHO-SHIELD® 2054 Conductive Coating
CHO-SHIELD® 2054 silver-plated-copper filled commercial-grade coating proved high levels of EMI shielding effectiveness, abrasion resistance and excellent adhesion on a variety of materials used fo..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Continuous
Global EPP PA 6E Extruded Polyamide 6
Polyamides, commonly referred to as nylons, are macromolecular, partially crystalline thermoplastics. Their physical properties are mainly determined by the composition and structure of their molecu..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Menzolit Menzolit® SMC 0650 Unsaturated Polyester UP
SMC 0650 Low pressure SMC for large panels when moulding force becomes critical. Specific moulding pressure < 20 bar. A Special molding procedure is necessary.Information Provided by Menzolit
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Kraiburg TPE THERMOLAST® K TF4ATL Thermoplastic Elastomer, translucent
Typical Markets / Application Sectors:Packaging CarePersonal Care & Baby CareToysStationariesElectric Household ApplianceApplication Examples:Design elementsFunctional elementsSealsTooth brushesHair..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Menzolit Menzolit® SMC 0150 Unsaturated Polyester UP
SMC 0150 is a general purpose SMC for applications in the field of electrical industry. Typical applications are housings, covers, wire distribution boxes and metering cabinets. The material meets t..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Silikony Polskie Silpasta EM Silicone Paste
Vaseline consistency, thixotropicElectric insulation for mechanical application of protective layers on electric devices and connections.
Minimum Service Temperature, Air -40.0 - -30.0 °C
-40.0 - -22.0 °F
SMAC SMACWRAP® EX Damping Material, 0.12 mm
SMACWRAP® concept is a smart and lightweight solution to embed into composite structures a very thin viscoelastic material. The SMACWRAP® will then bring damping to the composite structure wit..
Minimum Service Temperature, Air -40.0 - -30.0 °C
-40.0 - -22.0 °F
SMAC SMACWRAP® ST Damping Material, 0.10 mm
SMACWRAP® concept is a smart and lightweight solution to embed into composite structures a very thin viscoelastic material. The SMACWRAP® will then bring damping to the composite structure wit..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Continuous
Schwartz Technical Plastics OPTAMID® Cast Polyamide 6, Conditioned
Application: deflection rope sheaves for elevatorsInformation provided by Schwartz Technical Plastics GmbH
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Zell-Metall Engineering Plastics Zellamid 1100 MO at 50% RH
Improved sliding and self-lubricating properties are achieved by the addition of molybdenum disulphide. UV-radiation resistance is enhanced.Color: blackApplications: For conveyor screws
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Dow Corning XIAMETER® PMCPPMX-200 10,000CS Silicone Fluid
Is chemically equivalent to DOW CORNING® 200 FLUID 10,000CS. 100% active, 10,000 cSt, polydimethylsiloxane polymer.Information provided by Dow Corning
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
3M 755 Hybrid Sealant
3M™ 700-Series Hybrid Sealant and Hybrid Adhesive Sealant products are one component, moisture curing products which form permanent elastic bonds. They are similar in function as a typical one comp..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
ATG s.r.l. CO-ECO Epichlorohydrin Rubber
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
ATG s.r.l. EACM Ethylene-Acrylic Rubber
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
ATG s.r.l. NBR Nitrile-Butadiene Rubber
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
3M 9453FL Adhesive Transfer Tape with 300LSE Adhesive
Features:Clear Polyester (PET)Quick flowing acrylic adhesive speeds lamination processExcellent initial adhesion, especially to LSE (low surface energy) plasticsBonds graphics to powder coatings, LS..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
3M 9741 Double Coated Tape
3M™ Double Coated Tape 9741 is a 6.5 mil double coated tape utilizing a 0.5 mil hand-tearable polyester film heavily coated on both sides with 3 mils of an ultra high peel acrylic adhesive system. ..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Kraiburg TPE THERMOLAST® K TF3FMS Thermoplastic Elastomer, adhesion to PC, ABS, PETG  (Unverified Data**)&
Material Advantages:Excellent adhesion on 2 component moulding (dependent on geometry and processing)Easy to colour conforming to BfR, FDA, 2002/72/EC and EN71/3High resilienceGood flow characterist..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Resinlab® EP1200LV Casting Resin
Resinlab™ EP1200LV a low viscosity version of EP1200, a highly filled, medium viscosity black casting resin designed for applications requiring a high degree of thermal conductivity, flexibility an..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Resinlab® EP1282 Clear Unfilled Electronic Grade Epoxy Encapsulant
Resinlab™ EP1282 Clear is a two part unfilled electronic grade epoxy encapsulant designed for medium sized castings. It is recognized under the Component Recognition Program of Underwriters Laborat..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Kraiburg TPE THERMOLAST® K TF7AAC Transparent TPE  (Unverified Data**)
Transparent Compound with BgvV/FDA complianceGreat effects by using effectMasterbatchesTypical Applications: Esthetic and functional packaging elementsCosmetics and wellness productsParts with food ..
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Kraiburg TPE THERMOLAST® K TF5TAA Thermoplastic Elastomer, adhesion to PC, ABS  (Unverified Data**)
Material Advantages:Excellent adhesion on 2 component molding (dependent on geometry and processing)High degree of transparencyEasy to color also with metallic or other special effectsConforming to ..
Copyright © lookpolymers.com All Rights Reserved