Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 81.0 °C | 178 °F | |
PolyOne Geon™ Vinyl Packaging PK9 WHITE 1082 Polyvinyl Chloride, Rigid (PVC, Rigid) The HDT value refers to samples conditioned @ 50 deg.C. for 24 hrs.The bulk density test was performed under ASTM D-1895B.Information provided by PolyOne |
|||
Vicat Softening Point | 81.0 °C | 178 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Cycolac® FR15 ABS Flame retardant ABS (non-PBBE additive). Good property/toughness. Excellent moldability. UL94 V-0/5VA rated. |
|||
Vicat Softening Point | 81.0 - 130 °C | 178 - 266 °F | Average value: 103 °C Grade Count:101 |
Overview of materials for Polystyrene, Heat Resistant Grade This property data is a summary of similar materials in the MatWeb database for the category "Polystyrene, Heat Resistant Grade". Each property range of values reported is minimum and maximum values.. |
|||
Vicat Softening Point | 81.0 - 83.0 °C @Load 5.00 kg |
178 - 181 °F @Load 11.0 lb |
ISO R306 |
Fainplast Compounds RE 240 Rigid PVC, Extrusion Electric channels |
|||
Vicat Softening Point | 81.0 - 83.0 °C @Load 5.00 kg |
178 - 181 °F @Load 11.0 lb |
ISO R306 |
Fainplast Compounds RE 418 Rigid PVC, Extrusion Electric channels |
|||
Vicat Softening Point | 81.0 - 83.0 °C @Load 5.00 kg |
178 - 181 °F @Load 11.0 lb |
ISO R306 |
Fainplast Compounds RE 620 Rigid PVC, Extrusion Spiral pipes |
|||
Vicat Softening Point | 81.0 - 83.0 °C @Load 5.00 kg |
178 - 181 °F @Load 11.0 lb |
ISO R306 |
Fainplast Compounds RH 210/W Rigid PVC, Antishock Extrusion Various antishock profiles |
|||
Vicat Softening Point | 81.0 °C | 178 °F | |
LyondellBasell Lupolen® UHM 301 MDPE, Ultra-High Molecular Weight For the production of very high abrasion and impact resistant parts with lower slip/stick friction, as well as higher stress crack and chemical resistance. Apart from anticorrosion products, this m.. |
|||
Vicat Softening Point | 81.0 - 83.0 °C @Load 5.00 kg |
178 - 181 °F @Load 11.0 lb |
ISO R306 |
Fainplast Compounds RKS 300 Rigid PVC, Antishock Extrusion Lead Free Dielectric conduits, antishock |
|||
Vicat Softening Point | 81.0 - 83.0 °C @Load 5.00 kg |
178 - 181 °F @Load 11.0 lb |
ISO R306 |
Fainplast Compounds RL 708 Rigid PVC, Extrusion Corrugated electric pipes |
|||
Vicat Softening Point | 81.0 °C | 178 °F | B120; ISO 306 |
Inno-Comp INNOPOL® CS 2-9000 MA N Polypropylene Copolymer INNOPOL® CS 2-9000 MA N is a high melt flow copolymer with antistatic additive.INNOPOL® CS 2-9000 MA N is developed for producing injection molded automotive components.All information provide.. |
|||
Vicat Softening Point | 81.0 °C @Load 5.10 kg |
178 °F @Load 11.2 lb |
120°C/h; ASTM D 1525 |
Styrolution PS 416N HIPS Styrolution PS 416N is medium impact polystyrene with very good flow properties. It has a high rigidity whilst displaying a very good surface gloss.Very good flow propertiesHigh rigidityVery good su.. |
|||
Vicat Softening Point | 81.0 °C @Load 5.10 kg |
178 °F @Load 11.2 lb |
120°C/h; ASTM D 1525 |
Styrolution PS 542N HIPS Styrolution PS 542N is an impact polystyrene with high heat resistance.Information provided by Styrolution |
|||
Vicat Softening Point | 81.0 °C | 178 °F | ASTM D1525 |
SK Chemicals SKYTHANE® T875A Polyester Based, Low Hardness Thermoplastic Polyurethane Elastomer Description: SK Chemicals has supplied Thermoplastic Polyurethane Elastomer (TPU) under the name of SKYTHANE. Applications include:Keyboard CoversOutsoles of Soccer ShoesWire and CableAirbagsSheets .. |
|||
Vicat Softening Point | 81.0 °C | 178 °F | ASTM D1525 |
DuPont Elvax® 3135SB Ethylene-Vinyl Acetate Copolymer Resin for Blown Film 12 wt% Vinyl Acetate.Elvax® 3135SB is an extrudable ethylene-vinyl acetate copolymer resin available in pellet form for use in conventional extrusion equipment designed to process polyethylene resi.. |
|||
Vicat Softening Point | 81.0 °C | 178 °F | ASTM D1525 |
DuPont Nucrel® 0903HC Ethylene-Methacrylic Acid Copolymer Resin for Blown and Cast Film 9 wt% Methacrylic Acid.Nucrel® 0903HC (High-Clarity) is an ethylene-methacrylic acid copolymer resin available for use in conventional blown and cast film extrusion and coextrusion equipment design.. |
|||
Vicat Softening Point | 81.0 °C | 178 °F | ASTM D1525 |
DuPont Nucrel® 903 Ethylene-Methacrylic Acid Copolymer Resin for Blown and Cast Film 9 wt% Methacrylic Acid.Nucrel® 0903 is an ethylene-methacrylic acid copolymer resin available for use in conventional blown and cast film extrusion and coextrusion equipment designed to process pol.. |
|||
Vicat Softening Point | 81.0 °C @Load 5.10 kg |
178 °F @Load 11.2 lb |
50°C per hour; ISO 306B50 |
Total PS CPDS 853 Flame Retardant Polystyrene POLYSTYRENE (PS) COMPOUND (CPDS) 853 is a high impact, high stiffness halogen free flame retardant polystyrene.Main Characteristics:Bromine and Chlorine free,UL94 V2 @ 1.6 mm with very low combustio.. |
|||
Vicat Softening Point | 81.0 °C | 178 °F | ASTM D1525 |
Eastman Cadence™ GS1 Copolyester for film calendering Eastman Cadence™ copolyester, for calendered films, is a specialty plastic developed to meet the demand for an environmentally responsible material for the calendering industry. Available in diffe.. |
|||
Vicat Softening Point | 81.0 °C | 178 °F | ASTM D1525 |
Eastman Cadence™ GS2 Copolyester for film calendering Eastman Cadence™ copolyester, for calendered films, is a specialty plastic developed to meet the demand for an environmentally responsible material for the calendering industry. Available in diffe.. |
|||
Vicat Softening Point | 81.0 °C | 178 °F | |
Dow ATTANE™ 4213 Ultra Low Density Polyethylene ATTANE® 4213 copolymer is an ultra low density polyethylene that offers excellent flexibility, sealability, puncture resistance and superior strength. It exhibits oxygen transmission characteristic.. |
|||
Vicat Softening Point | 81.0 °C | 178 °F | 50°C/hr; 50N |
Polimeri Europa EDISTIR PD RK6223N High Impact Polystyrene (HIPS)
(discontinued **) Symbol according to ISO 1043-1: S/B Designation: Thermoplastic ISO 2897-SB,M,083-12-07-23 Halogen and Antimony free, medium impact polystyrene. This grade complies at 2 mm with IEC 65-20-2 and BSI.. |
|||
Vicat Softening Point | 81.0 °C @Load 1.02 kg |
178 °F @Load 2.25 lb |
ISO 306 |
Arkema Group Pebax® Rnew 35R53 SP 01 Polyether Block Amide (PEBA) Polyether block amide Pebax® 35R53 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV.. |
|||
Vicat Softening Point | 81.0 °C | 178 °F | 120°C/hr, 9.8N; ASTM D1525 |
Lubrizol Estane® 2103-80AEF Thermoplastic Polyurethane Elastomer Formerly PellethaneFeature: Film resin for injection blow moldingAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pellethane product l.. |
|||
Vicat Softening Point | 81.0 °C | 178 °F | |
Eastman Tenite 358-15 CAP Cellulose Acetate Propionate
(discontinued **) 15% Plasticized. ISO data as provided by the manufacturer, Eastman Chemical. |
|||
Vicat Softening Point | 81.0 - 83.0 °C @Load 5.00 kg |
178 - 181 °F @Load 11.0 lb |
ISO R306 |
Fainplast Compounds R 314 Rigid PVC, Extrusion Electric channels and various profiles |