Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | ASTM data at 5 mm/min. |
BASF Capron® GR15 HS 15% Glass-Filled Nylon 6 (Conditioned)
(discontinued **) Capron GR15 HS is a heat stabilized 15% glass reinforced polyamide 6 injection molding compound possessing a balance of engineering properties combined with excellent processability and surface aest.. |
|||
Tensile Strength, Ultimate | 70.0 - 180 MPa @Temperature 125 - 275 °C |
10200 - 26100 psi @Temperature 257 - 527 °F |
Average value: 123 MPa Grade Count:1 |
Overview of materials for Polyetherketoneetherketoneketone (PEKEKK), Carbon Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyetherketoneetherketoneketone (PEKEKK), Carbon Fiber Filled". Each property range of values reported .. |
|||
Tensile Strength, Ultimate | 70.0 MPa @Temperature 90.0 °C |
10200 psi @Temperature 194 °F |
ISO 527 |
LATI LARIL 13 G/20-V1 20% Glass Fiber Reinforced Polyphenylene Oxide (PPOm) (UL94V-1)
(Unverified Data**) Description: Laril thermoplastics are polyphenylene oxide (PPOm) products. They exhibit excellent toughness, even at low temperatures, good thermal resistance and dimensional stability are the most .. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | 5 mm/min |
Polimeri Europa KOBLEND PCA PD 935 G2 PC+ABS, 10% Glass Fiber
(discontinued **) Symbol according to ISO 1043/1/2: PC+ABS (GF) Injection moulding grade, reinforced with 10% glass fibres, high stiffness, very good dimensional stability. Vicat/B50 = 135°C Main application field.. |
|||
Tensile Strength, Ultimate | 70.0 - 269 MPa | 10200 - 39000 psi | Average value: 189 MPa Grade Count:23 |
Overview of materials for Polyarylamide, Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyarylamide, Glass Fiber Filled". Each property range of values reported is minimum and maximum values.. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | ASTM D638-68 |
Budd DSM-971 Smooth Surface, Class "A" SMC
(discontinued **) Parts requiring high strength and dimensional stability, excellent surface smoothness without sink marks; parts to be painted requiring an automotive-type finish.Data provided by the manufacturer. |
|||
Tensile Strength, Ultimate | 70.0 - 310 MPa | 10200 - 45000 psi | Average value: 173 MPa Grade Count:48 |
Overview of materials for Nylon 6, Carbon Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Carbon Fiber Filled". Each property range of values reported is minimum and maximum values of a.. |
|||
Tensile Strength, Ultimate | 70.0 - 80.0 MPa @Time 1.80e+7 - 7.20e+7 sec |
10200 - 11600 psi @Time 5000 - 20000 hour |
Average value: 66.6 MPa Grade Count:2 |
Overview of materials for Nylon 66, 20% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 20% Glass Fiber Filled". Specific grades with glass content between 15% and 24% are included. .. |
|||
Tensile Strength, Ultimate | 70.0 - 155 MPa @Temperature 60.0 - 150 °C |
10200 - 22500 psi @Temperature 140 - 302 °F |
Average value: 61.4 MPa Grade Count:2 |
Overview of materials for Nylon 610 This property data is a summary of similar materials in the MatWeb database for the category "Nylon 610". Each property range of values reported is minimum and maximum values of appropriate MatWeb e.. |
|||
Tensile Strength, Ultimate | 70.0 - 155 MPa @Temperature 60.0 - 150 °C |
10200 - 22500 psi @Temperature 140 - 302 °F |
Average value: 108 MPa Grade Count:2 |
Overview of materials for Nylon 610, Glass Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Nylon 610, Glass Reinforced". Each property range of values reported is minimum and maximum values of ap.. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | |
ICE Steatite L-4 Data provided by the manufacturer, International Ceramic Engineering. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | |
ICE Steatite L-5 Data provided by the manufacturer, International Ceramic Engineering. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | |
Haysite HCR-196 Corrosion Resistant Vinyl Ester/Glass Sheet A fiber glass reinforced thermoset sheet using DEREKANE® 470 vinylester in the resin matrix. Standard color is grey. Additional data covering resistance to specific chemicals is available upon re.. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | Safety factor of 10-20X is necessary in practice |
Saint-Gobain Vitreosil® Clear Fused Quartz Tubing Electrically fused quartz is recognized for its combination of purity, chemical inertness, physical stability, thermal shock resistance, high electrical resistivity, and high operating temperatures... |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | |
Styrolution NOVODUR® P2HGV ABS, 16% Glass Fiber Injection molding grade, glass reinforced (16%).Applications: Automotive industry: instrument panels, rear light housings, internal components of domestic appliances. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | ASTM D638 |
Sumitomo Bakelite North America RX® 2-520 Short-Glass Reinforced Diallyl Phthalate Isophthalate DAP Resin Isomer. Used for critical, high-performance military and commercial electrical components where long-term reliability is demanded.Meets the requirements of ASTM D5948 Type SI.. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | ISO 527 |
Sumitomo Bakelite North America RX® 660 Fiberglass Reinforced Phenolic Novolac RX 660 is a fiberglass reinforced phenolic molding compound, with good dimensional stability and good strength at elevated temperatures. Meets ASTM D-5948 Type MFH.Information supplied by Sumitom.. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | ASTM D638 |
Plenco 00732 Melamine-Phenolic, Granular, Injection Molded PLENCO 00732 is a melamine-phenolic copolymer molding compound, exhibiting excellent electrical and flame resistant properties. Type ASTM 5948 CMG, and UL recognized under component file E40654. 007.. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | ISO 527 |
Wellman Wellamid® GS40-60 42L-N 40% Glass Sphere Filled Nylon 6, Lubricated Typical Applications: Potentiometer liners, electrical coil forms, automotive window lift and power door lock switch bodies, gears, thick wall section moldings, emission control valves.Data provided.. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | ASTM D882 |
DuPont Selar® PA 2072 Nylon Barrier Resin Selar® PA 2072 is an amorphous nylon (polyamide) resin which is specially designed for blending with ethylene vinyl alcohol (EVOH) copolymers. Selar® PA 2072 can be tumble-blended with most grades.. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | |
Covestro Makrolon® 8035 Polycarbonate High viscosity extrusion and injection molding grade with 30% short glass fibers and easy mold release, low anisotropy, for stiff moldings requiring good dimensional stability.Information provided b.. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | cond; ISO 527-1/-2 |
DSM Novamid® 1013G15 1 NA PA6-GF15 15% Glass Reinforced, Injection Molding |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | ASTM D638 |
Cast Nylons Nycast® 6MPY Plasticized Nylon 6 A plasticized Type 6 material, NYCAST® 6MPY is formulated for use as pile driver caps or cushion pads. Data provided by the manufacturer, Cast Nylons Limited.The data below are average values prese.. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | |
BASF Procom® GC20H 250 Polypropylene Uses: car and truck fans and shrouds, car rear light housings, car radiator expansion tanks, car grills, domestic appliance components (e.g. washing machine tanks, impellers housings, etc.), textile.. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | ASTM D638 |
A. Schulman ComAlloy Hiloy® 112 Polypropylene, Glass Reinforced, Chemically Coupled, UL Data provided by the manufacturer, ComAlloy International Company.20% Glass Reinforced.The ComAlloy product line has been integrated into the A Schulman product line. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | ATSM D638 |
Ashley Polymers Ashlene® 851 Nylon 6, High Viscosity High viscosity for blown film, tubing, rods and shapes and blow molding. Has highest puncture resistance and clarity. FDA and NSF approved.Data provided by the manufacturer |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | ASTM D638 |
A. Schulman ComAlloy Hiloy® 132 Polypropylene, Glass/Mineral Reinforced, Chemically Coupled Data provided by the manufacturer, ComAlloy International Company.45% Glass/Mineral Reinforced.The ComAlloy product line has been integrated into the A Schulman product line. |
|||
Tensile Strength, Ultimate | 70.0 - 255 MPa | 10200 - 37000 psi | Average value: 166 MPa Grade Count:88 |
Overview of materials for Nylon 46, Glass Fiber Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Nylon 46, Glass Fiber Reinforced". Each property range of values reported is minimum and maximum values .. |
|||
Tensile Strength, Ultimate | 70.0 - 95.0 MPa @Temperature 60.0 - 150 °C |
10200 - 13800 psi @Temperature 140 - 302 °F |
Average value: 82.5 MPa Grade Count:1 |
Overview of materials for Polyethersulfone (PES), 10% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyethersulfone (PES), 10% Glass Fiber Filled". Specific grades with glass content between 5% and 14% a.. |
|||
Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | ASTM D638 |
A. Schulman ComAlloy Hiloy® 663 Nylon 6, Glass Bead Reinforced Data provided by the manufacturer, ComAlloy International Company.30% Glass Bead Reinforced.The ComAlloy product line has been integrated into the A Schulman product line. |