Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D 638 |
NOVA Chemicals Novapol® HB-W555-EC HDPE Blow Molding Resin HB-W555-EC complies with the U.S. FDA specifications for olefin polymers and may be used in the U.S. as an article or component of an article intended for use in contact with food. It is also biolo.. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | |
Reliance Industries Polypropylene - Suzorite mica (untreated) filler Information provided by Reliance Industries |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
SABIC PP 651H Polypropylene Random Copolymer for PIPE Product Description: PP 651H is specially designed for transport of hot and cold drinking water. This grade is highly heat stabilized and specially formulated for extraction resistance.Typical App.. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | 50mm/min; ASTM D638 |
Reliance Industries Repol T100MK Polypropylene REPOL Polypropylene T100MK is manufactured using Unipol PP process which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific cataly.. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
Braskem HM 150 HDPE Monofilament Polyethylene
(discontinued **) Applications: Raschel; flat yarn; general and industrial rape netting. Information provided by Braskem |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D882 |
Honeywell Capran® 512 LL Heat Stabilized Nylon Film
(discontinued **) Description: Capran® 512 LL is a heat-stabilized blown film produced from low lactam nylon-6 resin. It is recommended as bagging film for advanced composite fabrication and other high temperature .. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
Global PP-3342-M Polypropylene Random Copolymer Description-medium stiffness, low melting temperatures, very good for seal Applications-housewares, cookwareInformation provided by Global Polymers Corporation. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | 50 mm/min; ISO 527-1,-2 |
Inno-Comp INNOPOL® CS 2-3120 BPLU 9H0017 20% Talc-Filled, UV Stabilized Polypropylene Block-Copolymer INNOPOL® CS 2-3120 BPLU 9H0017 is a 20% talc filled, UV stabilized compound based on polypropylene block-copolymer.INNOPOL® CS 2-3120 BPLU 9H0017 is developed for producing injection molded au.. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | 50 mm/min; ISO 527-1,-2 |
Inno-Comp INNOPOL® CS 2-3130 NU UV-Stabilized 30% Talc-Filled Polypropylene Block-Copolymer INNOPOL® CS 2-3130 NU is an UV-stabilized 30% talc-filled polypropylene block-copolymer compound /PP-B TD30 (ISO 1043)/.INNOPOL® CS 2-3130 NU is recommended for producing injection molded prod.. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
IRPC Polimaxx Polene 2300LC Polypropylene Block Copolymer CHARACTERISTICS: HIGH IMPACTAPPLICATIONS: INJECTION MOLDING FOR FURNITURES, HOUSEWARES, CLOSURES, CONTAINERS, CRATES, AUTOPARTS AND ELECTRICAL APPLIANCES |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics NORYL WCV063 PPE+SEBS+Polyolefin (Europe-Africa-Middle East) Flexible, non-halogenated FR, mPPE extrusion grade material for evaluation in automotive wire coating applications requiring ISO6722. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | Type I, 5 mm/min; ASTM D 638 |
SABIC Innovative Plastics LNP Stat-loy AX06484X ABS LNP* Stat-Loy* AX06484 is a compound based on ABS resin containing mineral filler. Characteristics of this grade is it is extrudeable and static dissipative.This data was supplied by SABIC-IP for t.. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
SABIC Innovative Plastics LNP STAT-LOY M3000 PP LNP STAT-LOY* M3000 is a compound based on unfilled Polypropylene resin. Added feature of this material is: Antistat. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | 50mm/min; ISO 527-2 |
Borealis BA202E Polypropylene Block Copolymer for Non-Pressure Pipes BA202E is a high molecular weight, low melt flow rate polypropylene block copolymer with very high impact strength. Applications: BA202E is recommended for non-pressure pipes & fittings, thin-walled.. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
A. Schulman POLYFORT™ FPP 3707 CAC03 Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 3707 is a 20% CAC03 filled homopolymer polypropylene product.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
A. Schulman POLYFLAM™ E-17338 22% CACO3 Filled Copolymer Polypropylene DescriptionPolyfort® E 17338 is a 22% filled copolymer polypropylene product. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
A. Schulman POLYFLAM™ E-17338 22% CACO3 Filled Copolymer Polypropylene DescriptionPolyfort® E 17338 is a 22% filled copolymer polypropylene product. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
A. Schulman POLYFLAM™ E-17338 22% CACO3 Filled Copolymer Polypropylene DescriptionPolyfort® E 17338 is a 22% filled copolymer polypropylene product. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 Type IV |
Chevron Phillips Marlex® HXB TR-512 Extra high molecular weight polyethylene Benefits: outstanding impact and creep resistance, excellent ESCR, excellent chemical resistanceCharacteristics: ESCR > 700 at Condition A, at 50°C; ASTM D 1693Applications: 55-gallon drums, indust.. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
Entec Hypro™ PPC-T20 Copolymer Polypropylene, 20% Talc Reinforced Information provided by Entec |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | chs 2.0 in/min; ASTM D638 |
Diamond Polymers NPP25-1001 TF20 20% Talc Filled Copolymer Polypropylene Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | chs 2.0 in/min; ASTM D638 |
Diamond Polymers NPP50-0355 High Density Polyethylene Blow Molding/Extrusion Grade Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | DAM; ISO 527-1/-2 |
DuPont Performance Polymers Zytel® LC6601 NC010 Nylon 612 Plasticized Toughened Polyamide 612 Developed for Extrusion Information provided by DuPont Performance Polymers |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
Braskem HB 0155 HDPE Blow Molding Polyethylene Applications: Large containers from 60 to 200 litersInformation provided by Braskem |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ISO R 527 |
Addiplast Addilene PMD 50245 Polypropylene Homopolymer For electroplatingInformation provided by Addiplast. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
Aclo Accuguard Polypropylene CP0467V0CSV Copolymer Flame Retardant Automotive Approved grade |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
Chevron Phillips Marlex® B592 Polyethylene, Injection Molding Grade, HDPE
(discontinued **) Meets FDA Regulation 177.1520.Data provided by the manufacturer |
|||
Tensile Strength, Yield | 28.0 - 60.0 MPa | 4060 - 8700 psi | Average value: 42.2 MPa Grade Count:17 |
Overview of materials for Acrylic, Impact Modified, Molded This property data is a summary of similar materials in the MatWeb database for the category "Acrylic, Impact Modified, Molded". Each property range of values reported is minimum and maximum values .. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ISO R 527 |
Addiplast Addilene H 552 Y7 Polypropylene Homopolymer Good surface appearance, high temperature resistanceInformation provided by Addiplast. |
|||
Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM-D638 |
Braskem RP 145 RACO Random Polypropylene Copolymer RP 145 is a high melt flow rate random copolymer designed for use in thin-walled injection molding parts. This product offers good transparency, very good stiffness/impact strength balance, excellen.. |