Chevron Phillips Marlex® HHM 5502-01 ST High Density Ethylene Hexene Copolymer

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Injection Molded
Manufacturer	Chevron Phillips Chemical Company LP
Trade Name	Marlex®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Chevron Phillips Marlex® HHM 5502-01 ST High Density Ethylene Hexene Copolymer.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

High Density Ethylene Hexene CopolymerSag Upper Limit: 18 cm, Lower Limit: 13 cm; 2 ft. X 4ft. X 125 mil thick blank heated to forming temperature.Data provided by Chevron Phillips Chemical Company, LP.

Physical Properties	Metric	English	Comments
Density	0.955 g/cc	0.0345 lb/in³	ASTM D1505
Environmental Stress Crack Resistance	45 hour	45 hour	Condition A, F<sub>50</sub> (100% Igepal) CO-630, ASTM D1693; Condition B, F<sub>50</sub>: 35, ASTM D1693
Melt Flow	0.25 g/10 min	0.25 g/10 min	Condition 190/2.16; ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	28.0 MPa	4060 psi	2 in per min; ASTM D638 Type IV
Elongation at Break	>= 600 %	>= 600 %	2 in per min; ASTM D638 Type IV
Flexural Modulus	1.378 GPa	199.9 ksi	ASTM D790

Thermal Properties	Metric	English	Comments
Brittleness Temperature	<= -84.0 °C	<= -119 °F	ASTM D746

Users viewing this material also viewed the following: