Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ISO 527 |
Polimeri Europa Flexirene® MS 40 U Linear Low Density Polyethylene Flexirene MS 40 U is a linear low density polyethylene (LLDPE), with antioxidants, suitable for injection molding application.Parts made with Flexirene MS 40 U are characterized by a good balance be.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ISO 527 |
Polimeri Europa Riblene® GM 30 Low Density Polyethylene - Coating Grade Riblene GM 30 is a medium fluidity low density polyethylene resin (LDPE).Main Applications: Riblene GM 30 is suitable for coating applications where low neck-in and high manufacturing speed are req.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D412 |
Precision Polymer Engineering N80N Nitrile Rubber Nitrile Rubber, 76-85 °IRHD. Copolymer of acrylonitrile and butadiene. Meets Aerospace Specification DTD5595A Grade 80. ASTM designation = NBR. ISO designation = NBR.Applications: Sealing petroleum.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D412 |
Precision Polymer Engineering V70D Fluoroelastomer Compound Fluoroelastomer Rubber, 66-75 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. Meets Aerospace Specifications DTD5612A and DTD5543B Grade 70.Applications: Mouldings which are requ.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D412 |
Precision Polymer Engineering V75N Fluoroelastomer Compound Fluoroelastomer Rubber, 71-80 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. Meets Aerospace Specification DTD5543A Grade E. Note: inactive for new design, replaced by DTD5543B .. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
Petroquimica Triunfo Trithene® CX 7020 LDPE - Cast Film The Trithene® CX 7020 resin is a low-density polyethylene (LDPE) with medium molecular weight, excellent processability, and low gel content. Those features allow a production of thin and highly un.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics Lexan® ML7672 PC (Asia Pacific) Non FR PC + GF, UV-Stabilizer, balanced flow & impact. Available in Opaque only. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | at 100%; ASTM D412 |
1095A Polyurethane-based Biomedical Elastomer |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | at 100%; ASTM D412 |
2095A Polyurethane-based Biomedical Elastomer |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ISO 527 |
Polimeri Europa Flexirene® MS 40 A Linear Low Density Polyethylene Flexirene MS 40 A is a linear low density polyethylene (LLDPE), with antioxidants, suitable for injection molding application.Parts made with Flexirene MS 40 A are characterized by a good balance be.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | 500 mm/min (20 in./min.); ASTM D638, Type IV Specimen |
Eastman 18BOA Polyethylene
(discontinued **) Polyethylene 18BOA is a low density formulation used for injection molding. It is an outstanding material for molding lids and other container closures because it processes easily on automatic mold.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | 500 mm/min (20 in./min.); ASTM D638, Type IV Specimen |
Eastman D4044A Polyethylene
(discontinued **) D4044-A is a low density formulation used for injection molding. It is an outstanding material for molding lids and other container closures because it processes easily on automatic molding equipme.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
ExxonMobil LD 051.LJ Molding, Extrusion and Compounding Resin
(discontinued **) LD 051.LJ resin is used in Blow molded, squeeze bottles, Pail lids, Closures, and Extruded profiles.Information provided by ExxonMobil Chemical |
|||
Tensile Strength, Yield | >= 11.0 MPa | >= 1600 psi | |
Kazanorgsintez M 168 Polymer Composition for Rotary Molding Production Method: Composition is produced on the basis of 11503-070 grade low density polyethylene and 276-03 grade high density polyethylene composition. Application: Compositions are designed.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ISO 527 |
FKuR Kunststoff Terralene® LL 1101 Biobased Polyethylene With the brand name Terralene® FKuR offers biobased polyethylene compounds made using Braskem's Green PE. When compared to conventional polyethylene (PE), the main difference is that the ethanol.. |
|||
Tensile Strength, Yield | 11.0 MPa @Strain 100 % |
1600 psi @Strain 100 % |
ASTM D412 |
Multibase Multi-Flex® D 4107 C Black TPE Thermoplastic Elastomer Features: Chemical Resistance, Good Colorability, GoodElasticity, HighElectrically InsulatingFlame RetardantFlexibility, GoodHeat StabilizedOzone ResistantProcessability, GoodUV Resistance, Good I.. |
|||
Tensile Strength, Yield | 11.0 MPa @Strain 300 % |
1600 psi @Strain 300 % |
ASTM D412 |
Multibase Multi-Flex® G 7940 TPE Styrene Ethylene Butylene Styrene Block Copolymer Features: Chemical Resistance, Good General PurposeOzone Resistant Thermal Stability, Good Forms:PelletsProcessing Method:Injection MoldingBlow MoldingExtrusion Uses: Automotive ApplicationsInfor.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | Elastic; ASTM D412 |
Multibase Multi-Flex® A 8502 LC UV RXF/YYWA Black TPE Thermoplastic Elastomer Forms: PelletsProcessing Methods:Injection Molding Information provided by Multibase |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | 100%; ASTM D412 |
Teknor Apex APEX® 3211-85 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Automotive Applications, Non-specific Food Applications, General Purpose, Medical Applications, Modeling.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | 100%; ASTM D412 |
Teknor Apex APEX® 3301-85 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTM Uses-Automotive Applications, Food Service Applications, General Purpose, Medical Applications, Profiles, To.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D412 |
Teknor Apex Flexalloy® 3500-55 Polyvinyl Chloride Elastomer Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTM Features: Ultra High MWUses- Tubing, Pump PartsForms-PelletsProcessing- ExtrusionInformation provided by Te.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | At 50 mm/min; ISO 527-2 |
Borealis Borcoat™ GA700E-7032 Syntactic Polypropylene for Steel Pipe Coating Borcoat GA700E-7032 is a grey colored syntactic, high impact polypropylene with high thermal insulation capacity and high compressive strength.Borcoat GA700E-7032 is recommended as thermal insulatio.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | 2"/min; ASTM D638 |
A. Schulman CP808-01 Natural Linear, Low-Density Polyethylene DescriptionCP 808-01 is a lineal low-density polyethylene having good processability and exceptional toughness in injection molded parts. This compound has excellent flexibility, high impact streng.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | transverse direction; ASTM D882 |
A. Schulman CP80-01 Linear Low-Density Polyethylene DescriptionCP 880-01 natural is a linear low-density polyethylene having good tensile, stiffness, and toughness properties.ApplicationCP 880-01 meets FDA Regulation 21 CFR 177.1250(c) 3.1 and 3.2.In.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | 2"/min; ASTM D638 |
A. Schulman CP814-01 Linear, Low-Density Polyethylene DescriptionCP 814-01 is a linear low-density polyethylene resin with excellent molding characteristics and good low temperature impact. ApplicationCP814-01 meets the specifications contained in FDA .. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | heat aged one week at 300ºF |
TSE Industries Millathane® 5004 Millable Polyurethane Elastomer with 40 PHR N330 (HAF) Black MILLATHANE 5004 is a millable polyurethane elastomer having excellent processing characteristics. MILLATHANE 5004 stocks can be readily processed on conventional rubber equipment. Vulcanization is c.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
Huntsman PE2060 Injection Molding Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: High flow characteristics, good processability.Applications: Injection molding: general purpose molding, large moldings including housewares and toys.FDA Note.. |
|||
Tensile Strength, Yield | 11.0 - 22.0 MPa | 1600 - 3190 psi | Average value: 18.1 MPa Grade Count:66 |
Overview of materials for Linear Medium Density Polyethylene (LMDPE), Rotational Molded This property data is a summary of similar materials in the MatWeb database for the category "Linear Medium Density Polyethylene (LMDPE), Rotational Molded". Each property range of values reported i.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
Huntsman PE8020 Specialty Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Yields film with excellent draw down and machinability.Applications: Film extrusion: gel free film applications.FDA Notes: Conforms to FDA regulation 21 CFR 1.. |