Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 25.0 MPa | 3630 psi | ISO 527 |
Murtfeldt Original Material ”S”® plus + Bright ESD Polyethylene, Conductive Material ”S”® plus+ Bright ESD is a light plastic with high conductivity and a voltage-dissipating effect on earthed components. This material is ideal for use in applications where a high value.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | STN EN ISO 527-2 |
Plastcom PLASTALEN® PQ 81 N 003 Polypropylene with improved impact strength PP copolymer regranulate for injection molding, impact modified. General use in all industry branches. Delivered in natural mode and in the full RAL color scale.Information Provided by Plastcom spol.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | STN EN ISO 527-2 |
Plastcom SLOVALEN PC 51 C 30 Polypropylene Homopolymer and Copolymer, 30% Micronized Talc FeaturesModified homopolymer and copolymer PP for injection moulding with the content of 30% micronized, chemically modified talc. Increased strength, rigidity and thermal application up to 120°C... |
|||
Tensile Strength at Break | <= 25.0 MPa | <= 3630 psi | ISO/R527 |
Polykemi AB POLYfill PPC T4020 H Polypropylene Copolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Tensile Strength at Break | <= 25.0 MPa | <= 3630 psi | ISO/R527 |
Polykemi AB POLYfill PPH 30030DNH Polypropylene Homopolymer, Flame Retardant, Halogen Free Information provided by Polykemi AB |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics Geloy CR7520 ASA (Europe-Africa-Middle East) Geloy CR7520 is a general purpose injection moulding grade, blend of ASA/SAN. It can be positioned for outside parts in various markets, such as telecommunication, transportation, B&C, lighting and .. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ASTM D 638 |
LyondellBasell Moplen EP/60 Bianco Polypropylene Copolymer Description: Moplen Coat EP/60 Bianco fractional melt flow, 1,200 MPa flexural modulus, extrusion grade polypropylene copolymer has a very good balance of properties and processability. Available in.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | 50 mm/min, 1A; ISO 527 |
SABIC Innovative Plastics SABIC PPCOMPOUND 37T1020 PP SABIC® PPcompound 37T1020 is a general purpose, talc filled, heat stabilized copolymer polypropylene compound. This compound exhibits high impact and high flow, and is suitable for injection mold.. |
|||
Tensile Strength at Break | >= 25.0 MPa | >= 3630 psi | ASTM D638 |
Solvay Specialty Polymers Hyflon® PFA 125 Perfluoroalkoxy (PFA) Hyflon® PFA is a unique family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat res.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP STAT-KON MD000A PP LNP* STAT-KON* MD000A is a compound based on Polypropylene resin containing Carbon. Added feature of this grade is: Electrically Conductive. |
|||
Tensile Strength at Break | 25.0 MPa @Thickness 3.20 mm |
3630 psi @Thickness 0.126 in |
Injection Molded; ASTM D638 |
Styron MAGNUMâ„¢ 3325 MT Acrylonitrile Butadiene Styrene (ABS) Resin Overview: MAGNUMâ„¢ 3325 MT is a resin with excellent processing characteristics and matt surface finish. The mass (continuous process) ABS technology of Styron ensures an ABS resin that combines.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics Valox® K3501 PBT (Europe-Africa-Middle East) Unfilled PBT, Hydrollytically Stable, Heat Stabilized, Impact Modified. A hydrollytically stable grade designed for improved performance under heat/humidity environments. Targeted at automotive unde.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ASTM D638 |
SCG Chemicals EL-Proâ„¢ P401S Polypropylene Flat Yarn/Sheet Key Characteristics: Excellent mechanical propertiesRecommended Applications:Stretch tape for jumbo woven sheetMonofilament for rope and sheetInformation provided by SCG Chemicals |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | 500mm/min; ASTM D638 Type IV Specimen |
Westlake MC2001 High Density Polyethylene Coating Westlake MC2001 is a high density polyethylene designed for extrusion coating and lamination applications. MC2001 provides improved barrier properties, temperature resistance, stress crack resistanc.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | 500mm/min; ASTM D638 Type IV Specimen |
Westlake MC2004 High Density Polyethylene Coating Westlake MC2004 is a high density polyethylene designed for extrusion coating and lamination applications. MC2004 provides improved barrier properties, temperature resistance, stress crack resistanc.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ISO 527-2 |
Total PS CPDS 807 Flame Retardant Polystyrene POLYSTYRENE (PS) COMPOUND (CPDS) 807 is a high impact flame retardant polystyrene for use in HGW applications. PS CPDS 807 can be supplied in both natural and colored forms.Main Characteristics:DBD.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ASTM D638 |
Eastman Drystar 0827 Copolyester This product-line is designed to meet the needs of converters seeking value-added solutions to their drying requirements of copolyesters. Eastman’s copolyesters are highly valued for their excellen.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ISO 527 |
Eastman Eastar EN001 Copolyester Eastar EN001 Copolyester is a thermoplastic polyester copolymer. Eastar EN001 Copolyester has a relatively slow crystallization rate. This broadens the operating window for extrusion and forming pro.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ASTM D638 |
Eastman Eastar MN200 Copolyester Eastar Copolyester MN200 is an amorphous copolyester with excellent flow characteristics as well as radiation resistance and chemical resistance.Applications/UsesMedical |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ASTM D 638 |
Cossa Polimeri ESTASTIR HG 0808 Polystyrene High gloss polystyreneHigh impact resistance, good physical and mechanical characteristics, good processabilityInformation provided by Cossa Polimeri S.r.l. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ISO 527-1/-2 |
Covestro Desmopan® DP 9370A Polyurethane Extrusion- and injection molding gradevery good hydrolysis and microbial resistancegood low-temperature flexibilityfree from plasticizershigh moisture vapor transmission rateApplicationbreathable fi.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ISO 527-1/-2 |
Covestro Desmopan® DP 9370AU Polyurethane Extrusion- and injection molding gradewith special UV stabilizersvery good hydrolysis and microbial resistancegood low-temperature flexibilityfree from plasticizershigh moisture vapor transmission r.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ISO 527-1/-2 |
DSM Arnitel® EM460 Polyether Ester Elastomer (European and Asian Grade) Product description: Arnitel® combines the advantages of engineering thermoplastics, being easy to process with excellent mechanical properties, at the same time with the flexibility of rubbers.Arn.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ISO 527 |
Eurotec® Tecolen® CP20 MF20 NL XC30 PPCP, 20% mineral filled, flame retardant - halogen (RoHS compliant), heat stabilized, natural Information provided by Eurotec® |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ASTM D638 |
Aclo Accuguard Polypropylene HP0369V2CSL Homopolymer Flame Retardant Copper Stabilized |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ASTM-D638 |
Braskem TN2005 EVA General Film Copolymer TN2005 is an Ethylene-Vinyl Acetate (EVA) copolymer with high molecular weight, excellent mechanical properties, transparency, high gloss, and easy processing. Additionally, TN2005 has flexibility e.. |
|||
Tensile Strength at Break | 25.0 MPa @Temperature 120 °C |
3630 psi @Temperature 248 °F |
ASTM Test |
BASF Ultramid® 8202C PA6 (Dry) Ultramid 8202C is a modified crystalline and low viscosity, nylon 6 injection molding homopolymer. It is also available in heat stabilized (Ultamid 8202C HS) and/or pigmented versions. Its unique .. |
|||
Tensile Strength at Break | 25.0 MPa @Temperature 120 °C |
3630 psi @Temperature 248 °F |
ASTM Test |
BASF Ultramid® 8272G HS BK-102 12% Glass Filled PA6 (Conditioned) Ultramid 8272G HS BK-102 is a 12% glass fiber reinforced, black pigmented, thermally modified, nylon 6 blow molding compound offering an excellent balance of engineering properties combined with the.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | STN EN ISO 527-2 |
Plastcom SLOVALEN PH 81 C 40 Polypropylene Homopolymer and Copolymer, 40% Micronized Talc FeaturesModified homopolymer and copolymer PP for injection moulding with the content of 40% micronized, chemically modified talc. Increased strength, rigidity and thermal application up to 130°C... |