Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 25.0 MPa | 3630 psi | STN EN ISO 527-2 |
Plastcom SLOVALEN PC 78 FRD 3 Polypropylene Copolymer, Halogen Flame Retardant FeaturesDetermined for environment where contact with water is possible because the electric properties do not change by conditioning. Application - terminals, coil forms, guides in washing machine.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | |
Plastcom SLOVALEN PC 91 C 20 PP, 20% mineral filling FeaturesModified copolymer PP for injection moulding with the contenct of 20% microground, chemically modified talc. Increased strength, rigidity and thermal application up to 100°C depending on th.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | STN EN ISO 527-2 |
Plastcom SLOVALEN PH 51 C 40 Polypropylene Homopolymer and Copolymer, 40% Micronized Talc FeaturesModified homopolymer and copolymer PP for injection moulding with the content of 40% micronized, chemically modified talc. Increased strength, rigidity and thermal application up to 130°C... |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ISO 527 |
Polimeri Europa Edistir® PD ICE S 900 High Impact Polystyrene - Very High ESCR Very high environmental stress cracking resistant (VH ESCR) HIPS.ICE S 900 exhibits high toughness and excellent chemical resistance to oils, fats and chemical agents, and in particular to cyclopent.. |
|||
Tensile Strength at Break | <= 25.0 MPa | <= 3630 psi | ISO/R527 |
Polykemi AB POLYfill PPC T25020 Polypropylene Copolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Tensile Strength at Break | <= 25.0 MPa | <= 3630 psi | ISO/R527 |
Polykemi AB POLYfill PPC T4030 E20 Polypropylene Copolymer, Mineral Reinforced, Elastomer Modified Information provided by Polykemi AB |
|||
Tensile Strength at Break | <= 25.0 MPa | <= 3630 psi | ISO/R527 |
Polykemi AB POLYfill PPH 150DNH Polypropylene Homopolymer, Flame Retardant, Halogen Free Information provided by Polykemi AB |
|||
Tensile Strength at Break | <= 25.0 MPa | <= 3630 psi | ISO/R527 |
Polykemi AB POLYfill PPHC T20050 Polypropylene, Mineral Reinforced Information provided by Polykemi AB |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | STN EN ISO 527-2 |
Plastcom SLOVALEN PC 53 N Polypropylene Copolymer, UV Stabilization FeaturesModified copolymer PP for injection moulding, with the ability of modeling the melt flow rate within the interval 5 - 20 g/10 min. Can be used for simple small as well as for large complica.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ASTM D412 |
Polimeri Europa Europrene® SOL TH 2315 Styrene - Ethylene / Butylene Block Copolymer Europrene® SOL TH 2315 is a linear block copolymer obtained by selective hydrogenation of styrene-butadiene-styrene block copolymers. The polymer is based on styrene and ethylene/butylene, where b.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ISO 527-2 |
Total Lacqrene® 1235 High Impact Polystyrene
(discontinued **) LACQRENE® 1235 is a high gloss, high impact polystyrene used in injection molding and co-extrusion. This grade produces articles with a surface gloss level equivalent to that of certain grades of .. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | |
LATI Latimass 82-02 D030 PA12 Specific density compound based on Polyamide 12 (PA12). Special filler. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria T.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ASTM D638 |
SABIC Innovative Plastics LNP LUBRICOMP FL004 PE (Asia Pacific) LNP* Lubricomp* FL004 is a compound based on Polyethylene resin containing PTFE. Added features of this material include: Internally Lubricated. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL WCV063 PPE+SEBS+Polyolefin Flexible, non-halogenated FR, mPPE extrusion grade material for evaluation in automotive wire coating applications requiring ISO6722. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL WCV063 PPE+SEBS+Polyolefin (Europe-Africa-Middle East) Flexible, non-halogenated FR, mPPE extrusion grade material for evaluation in automotive wire coating applications requiring ISO6722. |
|||
Tensile Strength at Break | >= 25.0 MPa | >= 3630 psi | |
Shandong Dongyue Shenzhou New Material Co DS601 Perfluorinated Ethylene-Propylene Copolymer Conformable with: Q/DYS 003-2007Fluorinated Ethylene Propylene resin is the copolymer of the TFE and HFP, with good thermal stability, outstanding chemical inertness, good electrical insulation, and.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics Valox® K3501 PBT (Europe-Africa-Middle East) Unfilled PBT, Hydrollytically Stable, Heat Stabilized, Impact Modified. A hydrollytically stable grade designed for improved performance under heat/humidity environments. Targeted at automotive unde.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | 500mm/min; ASTM D638 Type IV Specimen |
Westlake MC2004 High Density Polyethylene Coating Westlake MC2004 is a high density polyethylene designed for extrusion coating and lamination applications. MC2004 provides improved barrier properties, temperature resistance, stress crack resistanc.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ASTM D638 |
Total PS CPDS 818 Easy Flow, Non-Deca Polystyrene Total Petrochemicals Polystyrene 818 is a high heat resistant, high impact Polystyrene for injection molding and extrusion/thermoforming. It is recommended for the manufacturing of articles which r.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ISO 527-2 |
Total PSI 3630 Medium Impact Polystyrene 3630 is an easy flowing, medium impact polystyrene for injection molding. This grade offers a good compromise of flow and softening point allowing for the production of large and complex articles a.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ASTM D638 |
Eastman Eastar EN001 Copolyester Eastar EN001 Copolyester is a thermoplastic polyester copolymer. Eastar EN001 Copolyester has a relatively slow crystallization rate. This broadens the operating window for extrusion and forming pro.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ISO 527-1/-2 |
DSM Arnitel® EM400 40 Shore D, Injection or Extrusion Grade Copolyester Elastomer (North America) Product description: Arnitel® combines the advantages of engineering thermoplastics, being easy to process with excellent mechanical properties, at the same time with the flexibility of rubbers.Arn.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0336W10L1 Wollastonite Reinforced |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0336W20L1 Wollastonite Reinforced |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | ASTM-D638 |
Braskem TN2005 EVA General Film Copolymer TN2005 is an Ethylene-Vinyl Acetate (EVA) copolymer with high molecular weight, excellent mechanical properties, transparency, high gloss, and easy processing. Additionally, TN2005 has flexibility e.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | |
AorTech Biomaterials ECSil™ 70A Biomedical Carbonate Silicone Pellets Elast-Eon™ Carbonate Silicone (ECSil™) is a family of next generation biomedical polymers. ECSil™ is finding strong interest in cardiac pacing leads, orthopaedics, spinal discs, and generally an.. |
|||
Tensile Strength at Break | 25.0 MPa | 3630 psi | Conditioned; ISO R 527 |
Addiplast Addilene J 290 M20F Flame Retardant Polypropylene, 20% Mineral Filled Flame retardant, mineral filled, with halogensInformation provided by Addiplast. |
|||
Tensile Strength at Break | <= 25.0 MPa | <= 3630 psi | ISO/R527 |
Polykemi AB POLYfill PPC T5020 Polypropylene Copolymer, Mineral Reinforced Information provided by Polykemi AB |