Zell-Metall Engineering Plastics Zellamid 1100 MO at 50% RH

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, MoS2 Filled
Manufacturer	Zell-Metall Engineering Plastics
Trade Name	Zellamid
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Zell-Metall Engineering Plastics Zellamid 1100 MO at 50% RH.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Improved sliding and self-lubricating properties are achieved by the addition of molybdenum disulphide. UV-radiation resistance is enhanced.Color: blackApplications: For conveyor screws

Physical Properties	Metric	English	Comments
Density	1.15 g/cc	0.0415 lb/in³	Dry Density
Moisture Absorption at Equilibrium	2.5 - 3.0 %	2.5 - 3.0 %	Saturation at 50% RH
Water Absorption at Saturation	6.0 - 7.0 %	6.0 - 7.0 %	23°C

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	78 - 80	78 - 80	DIN 53505
Tensile Strength at Break	70.0 - 72.0 MPa	10200 - 10400 psi	DIN 53455
Elongation at Break	30 - 60 %	30 - 60 %	DIN 53455
Tensile Modulus	2.80 GPa	406 ksi	DIN 53457
	0.500 GPa @Temperature 100 °C	72.5 ksi @Temperature 212 °F	DIN 53457
Charpy Impact, Notched	4.50 - 8.50 J/cm²	21.4 - 40.5 ft-lb/in²	DIN 53453
Coefficient of Friction	0.050 - 0.10	0.050 - 0.10	to steel, added lubrication
	0.30 - 0.35	0.30 - 0.35	to steel, no lubrication; ISO/DTR 7147
Tensile Creep Modulus, 1000 hours	<= 500 MPa	<= 72500 psi	DIN 53444

Thermal Properties	Metric	English	Comments
CTE, linear	80.0 µm/m-°C @Temperature 20.0 °C	44.4 µin/in-°F @Temperature 68.0 °F
Specific Heat Capacity	1.67 J/g-°C	0.399 BTU/lb-°F
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F	DIN 52612
Melting Point	220 °C	428 °F
Maximum Service Temperature, Air	100 - 120 °C	212 - 248 °F	long time operation
	120 - 140 °C	248 - 284 °F	medium time operation
	160 °C	320 °F	a few hours operation
Minimum Service Temperature, Air	-40.0 °C	-40.0 °F
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Volume Resistivity	3.00e+12 - 5.00e+12 ohm-cm	3.00e+12 - 5.00e+12 ohm-cm	DIN 53482
Surface Resistance	1.00e+10 - 3.00e+10 ohm	1.00e+10 - 3.00e+10 ohm	DIN 53482
Dielectric Constant	12 @Frequency 1e+6 Hz	12 @Frequency 1e+6 Hz	DIN 53483
Dielectric Strength	15.0 - 20.0 kV/mm	381 - 508 kV/in	DIN 53481
Dissipation Factor	0.15 @Frequency 1e+6 Hz	0.15 @Frequency 1e+6 Hz	DIN 53483
Comparative Tracking Index	600 V	600 V	KV Method; DIN 53480

Descriptive Properties	Value	Comments
Time yield limit	up to 8.5	s1/1000; DIN.53444

Users viewing this material also viewed the following: