Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 160 °C | 320 °F | short period, no load (dry sample) |
Omnia Plastica Akulon® PA6 G.Oil - Omniamid Oil - at 50% RH Cast Nylon 6 with the addition of 6% of special lubricating oil which remains in solution in the material. The unique method of production results in a micro distribution of oil particles with a hom.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | |
Precision Polymer Engineering S70S Conductive Silicone Rubber Tan coloured, Silicone Rubber, 71-80 °IRHD. Electrically conductive, Silver/Aluminum filled silicone rubber.Applications: Specially compounded to offer excellent physical and electrical properties.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | |
Parker Chomerics Tecknit NC-Consil® FR751 Nickel Coated Graphite Filled Silicone Elastomer Description: NC-Consil is a silicone elastomer filled with Nickel coated graphite carbon particles. It provides high electrical conductivity, broadband shielding and environmental sealing. NC-Consil.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | Intermittent |
Ensinger ENSITEP® PET Polyethylene Terephthalate - Extruded Products
(discontinued **) ENSITEP is an unreinforced, semi-crystalline thermoplastic polyester derived from polyethylene terephthalate. Its excellent wear resistance, low coefficient of friction, high flexural modulus, and .. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | <20000 hours; IEC 60216-P1 |
Hexion Bakelite™ PF 1107 Phenolic Formaldehyde Resin, Low Shrinkage, Resistant to High Temperatures
(disconti Phenolic molding compound, inorganically filled, glass fiber reinforced, high heat resistance, low heat expansion coefficient, highest resistance to pressure, high dimensional stability.Application .. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | short term |
Lehmann & Voss LUVOCOM® 1-8490 Polyamide 66, with carbon fiber, heat stabilized Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Strong, stiff parts.Reduced moment of inertia compared with metal parts.High dimensionally stab.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | short term |
Lehmann & Voss LUVOCOM® 19-7416 Polyamide 46, with carbon fiber and PTFE Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Strong, stiff parts.Reduced moment of inertia compared with metal parts.Electrically conductive.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | short term |
Lehmann & Voss LUVOCOM® 19-7748 Polyamide 46, with carbon fiber, PTFE, lubricant modified Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Strong, stiff parts.Reduced moment of inertia compared with metal parts.Electrically conductive.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | short term |
Lehmann & Voss LUVOCOM® 19-7950 Polyamide 46, with aramid reinforcement and PTFE, toughness-modified, easy flowing Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Good friction and wear behaviour especially at increased temperatures.Emergency running propert.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | short term |
Lehmann & Voss LUVOCOM® 1-RG 2 Polyamide 66, with carbon fiber, heat stabilized Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Strong, stiff parts.Reduced moment of inertia compared with metal parts.Electrically conductive.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | short term |
Lehmann & Voss LUVOCOM® 1-1129 Polyamide 66, with glass fiber, PTFE, lubricant modified, heat stabilized Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Strong, stiff parts.Bearings, .. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | short term |
Lehmann & Voss LUVOCOM® 1-7830 Polyamide 66, with PTFE, lubricant modified, improved wear resistance, high viscosity Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Isotropic shrinkage characteri.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | short term |
Lehmann & Voss LUVOCOM® 1-7984 Polyamide 66, with aramid reinforcement and PTFE, heat stabilized Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Emergency running property.Improved heat resistance.Control disks, cams, sliding elements and o.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | Intermittent |
Global EPP PA 612 Copolymer Cast Polyamide 612 Cast nylons are generally accepted as the primary engineering polymer, suitable for virtually any plain bearing application. By varying the conditions of polymerisation the mechanical properties of .. |
|||
Maximum Service Temperature, Air | 160 - 220 °C | 320 - 428 °F | |
Sichuan Deyang Haton® hp23310 Polyphenylene Sulfide Coating Powder; anti-corrosion, wear resistantInformation provided by Sichuan Deyang Chemical Co., LTD |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | UL-746 B |
Saint-Gobain Norton® PMP Film Features/Benefits:Good release properties for up to 180°C (356°F) cure composites (application dependent)low density for high surface area per poundExcellent clarityThermoformableProduct avail.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | a few hours operation |
Zell-Metall Engineering Plastics Zellamid 1100 MO at 50% RH Improved sliding and self-lubricating properties are achieved by the addition of molybdenum disulphide. UV-radiation resistance is enhanced.Color: blackApplications: For conveyor screws |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | |
Dow Corning MOLYKOTE® 1122 CHAIN AND OPEN GEAR GREASE Lubricating chains, gear drives, worm gears, slow-moving bearings. Resists water, steam and high temperatures; contains MoS2 for high loads and low speeds. Thick, black, tacky synthetic grease con.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | |
ChevronTexaco FM NLGI 1 Grease EP FeaturesChevron FM Greases EP are high performance, multipurpose food machinery greases that are white in color, odorless, tasteless, and water-resistant. Available in three grades, Chevron FM Greas.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | short term; EMS |
EMS-Grivory Grivory® 2S 25 W 20 X black 9992 PA610-I Product Description: GRILAMID 2S 25 W 20 X black 9992 is a semi-flexible high viscosity heat and impact modified polyamide 610, especially suitable for extrusion applications. This PA610 product is .. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | short term; EMS |
EMS-Grivory Grivory® XE 4105 black 9992 PA610-GF50 Product description: Grilamid XE 4105 black 9992 is a 50% glass fiber reinforced, heat stabilized and UV resistant polyamide 610 (PA610) injection molding grade. This product is to a large extent ba.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | |
ChevronTexaco Wheel End Grease FeaturesChevron Wheel End Grease is a high performance grease specifically engineered for trailer wheel-ends operating in most conditions.It is formulated with ISOSYN™ base stocks, a unique polyure.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | See Note 2. |
ChevronTexaco Cygnus® Grease NLGI Grade 2 Texaco Cyngus Greases are high performance, multipurpose food machinery greases that are white in color, odorless, tasteless, and water-resistant. Available in two grades, Texaco Cyngnus Greases wer.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | short term; EMS |
EMS-Grivory Grivory® XE 5004 (BM-30/2 UV) PA666-MD30 Product description: Grilon XE 5004 is a normal viscosity PA6 injection molding grade with 30% mineral reinforcement, which is additionally UV stabilized. Grilon XE 5004 has the following important .. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | for 50% loss of tensile strength after 5000hr |
BASF Ultramid® KR 4355 G5 BK 00564 25% Glass Filled PA6/6T (Conditioned) Description: 25% glass-fiber reinforced product for injection-molding; high toughness, strength and stiffness, low water absorption, high melting point (295°C [563°F]). The mechanical properties r.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | for 50% loss of tensile strength after 5000hr |
BASF Ultramid® KR 4355 G7 BK 00564 35% Glass Filled PA6/6T (Conditioned) Description: 35% glass-fiber reinforced product for injection-molding; high toughness, strength and stiffness, low water absorption, high melting point (295°C [563°F]). The mechanical properties r.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | |
Alliance BIF-16 Bonded (Composite) Magnetic Material |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | |
Abatron AboCast 10-5/AboCure 50-17 Epoxy AboCast 10-5 is a filled, high-viscosity epoxy resin. It is blended with AboCure 50-17 to make a structural adhesive and casting compound for the optic and electric industry. AboCure 50-17 is a high.. |
|||
Maximum Service Temperature, Air | 160 °C | 320 °F | short term |
Lehmann & Voss LUVOCOM® 1-7497 Polyamide 66, with PTFE, lubricant modified, heat stabilized Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Isotropic shrinkage characteri.. |